# Upgrade a PC or laptop with more RAM or an SSD

Free checklist from Honu Services. Full guide: upgrade-ram-or-ssd.html

- [ ] Exact model number found
- [ ] Compatible part confirmed (type, size, slot)
- [ ] Files backed up
- [ ] Clone or fresh-install plan ready
- [ ] Static discharged, power and battery disconnected
- [ ] New part detected in Task Manager
- [ ] Old drive wiped before reuse (see the drive-wiping guide)

## Steps

1. **Find the exact model.** Open Command Prompt and run: wmic csproduct get name (or check the sticker underneath). Search that model plus "RAM upgrade" or "SSD upgrade" to see what fits.
2. **Check what you have.** Task Manager, Performance, Memory shows slots used and speed. Many thin laptops have soldered RAM that cannot be upgraded; check before buying.
3. **Buy the matching part.** RAM: same type (DDR4 or DDR5), laptop (SO-DIMM) or desktop (DIMM), and ideally the same speed. SSD: check whether the slot takes M.2 NVMe, M.2 SATA or a 2.5-inch SATA drive.
4. **Back up and prepare.** Back up your files. For an SSD swap, use the SSD maker's free cloning tool or plan a fresh Windows install from a USB stick made with Microsoft's Media Creation Tool.
5. **Install safely.** Shut down, unplug, and on laptops disconnect the battery if it is accessible. Touch bare metal to discharge static. Seat RAM at an angle and press until the clips click; slide an M.2 SSD in at an angle and fix it with its screw.
6. **Confirm it works.** Boot up and check Task Manager shows the new memory or drive. For a new SSD, set it as the boot drive in the BIOS if needed, then initialize any empty drive in Disk Management.

Need a hand? Email info@chathonu.com
