← Back to Calculus

Slice Solids into Disks

Slice a solid into thin pieces whose volumes you know, add them up with an integral, and you can find the volume of shapes from vases to engine parts.

Volume by slicing

If you slice a solid perpendicular to the \(x\)-axis and each slice at position \(x\) has cross-sectional area \(A(x)\), a thin slice has volume about \(A(x)\,dx\). Adding them gives \(V = \int_a^b A(x)\,dx\). This one idea, Cavalieri's principle in calculus form, underlies every method in this lesson.

V = \int_a^b A(x)\,dx

Cross-sections of known shape

Some solids are described by their cross-sections. Suppose the base is the region under \(y = \sqrt{x}\) on \([0, 4]\), and each cross-section perpendicular to the \(x\)-axis is a square. The side is \(\sqrt{x}\), so \(A(x) = x\), and \(V = \int_0^4 x\,dx = 8\). Change the squares to semicircles and \(A(x)\) becomes \(\frac{\pi}{8}x\), giving \(V = \pi\).

The disk method

Rotate the region under \(y = f(x)\) from \(a\) to \(b\) about the \(x\)-axis. Each cross-section is a disk of radius \(f(x)\), with area \(\pi[f(x)]^2\). So the volume is \(\pi\int_a^b [f(x)]^2\,dx\). Remember to square the radius, not the volume element.

V = \pi\int_a^b [f(x)]^2\,dx

Worked example: a cone

Rotate \(y = \frac{r}{h}x\) on \([0, h]\) about the \(x\)-axis to get a cone of radius \(r\) and height \(h\). \(V = \pi\int_0^h \frac{r^2}{h^2}x^2\,dx = \pi\frac{r^2}{h^2}\cdot\frac{h^3}{3} = \frac{1}{3}\pi r^2 h\). Calculus confirms the cone formula, and the same approach gives \(\frac{4}{3}\pi r^3\) for a sphere by rotating a semicircle.

V = \tfrac{1}{3}\pi r^2 h

Worked example: a paraboloid

Rotate \(y = \sqrt{x}\) on \([0, 4]\) about the \(x\)-axis. Then \(V = \pi\int_0^4 (\sqrt{x})^2\,dx = \pi\int_0^4 x\,dx = 8\pi\). The bowl-shaped solid is a paraboloid, the shape of satellite dishes and car headlight reflectors.

The washer method

If the region lies between an outer curve \(R(x)\) and an inner curve \(r(x)\), rotating it makes cross-sections shaped like washers, disks with holes. The area is \(\pi(R^2 - r^2)\), so \(V = \pi\int_a^b (R(x)^2 - r(x)^2)\,dx\). Square each radius separately; \((R - r)^2\) is wrong.

V = \pi\int_a^b \left(R(x)^2 - r(x)^2\right)dx

Worked example: washers

Rotate the region between \(y = x\) and \(y = x^2\) on \([0, 1]\) about the \(x\)-axis. The outer radius is \(x\) and the inner is \(x^2\). \(V = \pi\int_0^1 (x^2 - x^4)\,dx = \pi\left(\frac{1}{3} - \frac{1}{5}\right) = \frac{2\pi}{15}\).

Rotating about other lines

For rotation about a horizontal line \(y = k\), each radius is a distance from that line: \(|f(x) - k|\). For rotation about the \(y\)-axis using disks, write \(x\) as a function of \(y\) and integrate in \(y\). Drawing the axis and a typical radius in your sketch prevents most setup errors.

The shell method

Rotating about the \(y\)-axis, it is often easier to use cylindrical shells: a thin vertical strip at distance \(x\) from the axis sweeps out a shell with circumference \(2\pi x\), height \(f(x)\), and thickness \(dx\). Then \(V = 2\pi\int_a^b x f(x)\,dx\). For \(y = x - x^2\) rotated about the \(y\)-axis, shells give \(2\pi\int_0^1 (x^2 - x^3)\,dx = \frac{\pi}{6}\), while washers would need solving for \(x\) in terms of \(y\).

V = 2\pi\int_a^b x\,f(x)\,dx

Choosing a method

Disks or washers: slices are perpendicular to the axis of rotation. Shells: strips are parallel to the axis. Choose whichever leads to an integral in a variable where the curves are easy to describe. When the region is bounded by functions of \(x\) and the axis is vertical, shells are usually simpler.

Common mistakes

Forgetting to square the radius. Writing \((R - r)^2\) instead of \(R^2 - r^2\). Using the wrong radius when rotating about a line other than an axis. Forgetting the \(2\pi\) in shells or the \(\pi\) in disks. Mixing up the variable of integration.

Try it yourself

Rotate \(y = x^2\) on \([0, 1]\) about the \(x\)-axis. Answer: \(\pi\int_0^1 x^4\,dx = \frac{\pi}{5}\). Then rotate the same region about the \(y\)-axis with shells: \(2\pi\int_0^1 x \cdot x^2\,dx = \frac{\pi}{2}\).

Key takeaways

Volume is the integral of cross-sectional area. Disks: \(\pi\int f^2\). Washers: \(\pi\int(R^2 - r^2)\). Shells: \(2\pi\int x f(x)\). Sketch the region, the axis, and a typical slice before writing anything.

Flashcard

V = \int_a^b A(x)\,dx

Volume by slicing

Integrate cross-sectional area.

Check your understanding

The region under y = x on [0, 1] is rotated about the x-axis. What is the volume?

Take the unit quiz

← Previous lesson Next lesson →