Pressure in still fluids
Fluids, liquids and gases, push on every surface they touch. Pressure grows with depth, which explains everything from ear-popping dives to hydraulic car lifts.
Pressure
Pressure is force per unit area, \(P = F/A\), measured in pascals, where 1 Pa = 1 N/m². A 500 N person standing on one foot of area 0.020 m² exerts 25,000 Pa on the floor, and much more in a narrow high heel. Snowshoes spread weight over a large area, lowering pressure so you do not sink.
Atmospheric pressure
The weight of the air above us creates atmospheric pressure, about 101,325 Pa, or 1 atmosphere, at sea level, roughly the weight of 10 tonnes on every square metre. We do not notice it because fluids inside our bodies push outward equally. It falls with altitude: at the summit of Everest it is only about a third of the sea-level value.
Pressure and depth
In a fluid at rest, pressure increases with depth: \(P = P_0 + \rho gh\), where \(\rho\) is the density, h the depth, and \(P_0\) the pressure at the surface. In water, with density 1000 kg/m³, each 10 m of depth adds about 98,000 Pa, almost one extra atmosphere.
Shape does not matter
Pressure at a given depth depends only on depth and density, not on the shape or width of the container. Water in a narrow tube and in a wide tank connected at the bottom rises to the same level. This explains why water towers can supply pressure to whole neighbourhoods and why dams must be thicker at the bottom.
Gauge and absolute pressure
Absolute pressure includes atmospheric pressure; gauge pressure is the amount above atmospheric. Tyre gauges read gauge pressure: a tyre at 220 kPa gauge has an absolute pressure of about 320 kPa. Blood pressure readings, such as 120/80 mmHg, are also gauge pressures.
Pascal's principle
Blaise Pascal stated in the 1650s that pressure applied to an enclosed fluid is transmitted undiminished to every part of the fluid and its container. Squeezing one end of a toothpaste tube pushes paste out of the other, and pressing a car's brake pedal raises the pressure in brake fluid all the way to the wheels.
Hydraulic systems
Hydraulic lifts use Pascal's principle to multiply force: \(F_2 = F_1 A_2/A_1\). With a 0.0020 m² small piston and a 0.20 m² large piston, a 150 N push lifts 15,000 N, enough for a car. Energy is still conserved: the small piston must move 100 times further than the large one.
Worked example
A diver descends to 30 m in fresh water. The gauge pressure is 1000 x 9.8 x 30, about 294,000 Pa, and the absolute pressure is about 294,000 + 101,000 = 395,000 Pa, nearly 4 atmospheres. Air in her lungs is compressed to about a quarter of its surface volume, which is why divers must breathe out while ascending to avoid injury.
Key takeaways
Pressure is force per area, in pascals. Atmospheric pressure at sea level is about 101,325 Pa and falls with altitude. In a still fluid, pressure is P0 plus rho g h, adding about one atmosphere per 10 m of water, regardless of container shape. Gauge pressure is pressure above atmospheric; absolute includes it. Pascal's principle says applied pressure spreads undiminished through an enclosed fluid, so hydraulic systems multiply force by the area ratio while conserving energy.
Flashcard
Force per unit area
Check your understanding
A hydraulic lift has a small piston of 0.0020 m^2 and a large piston of 0.20 m^2. What force on the small piston lifts 15,000 N?
