Continuity and Bernoulli
Moving fluids obey two simple rules: what flows in must flow out, and faster flow means lower pressure. Together they explain hoses, chimneys, and spray bottles.
Ideal fluid flow
To keep things simple, physicists often model an ideal fluid: incompressible, with no viscosity (internal friction), and with steady, smooth flow along streamlines. Water in pipes and air at low speeds behave approximately this way. Real fluids have viscosity, which matters for honey, blood in narrow vessels, and oil in engines.
Flow rate
The volume flow rate is the volume passing a point per second, \(Q = Av\), where A is the cross-sectional area and v the flow speed. Water flowing at 2.0 m/s through a pipe of area 0.010 m² has a flow rate of 0.020 m³/s, or 20 litres per second.
The continuity equation
For an incompressible fluid, the flow rate is the same everywhere along a pipe: \(A_1v_1 = A_2v_2\). Where the pipe narrows, the fluid must speed up. Putting your thumb over a hose's end to cut its area to a quarter makes the water emerge four times faster. Rivers flow faster through narrow gorges than across wide plains.
Bernoulli's equation
Daniel Bernoulli showed in 1738 that along a streamline of an ideal fluid, \(P + \tfrac{1}{2}\rho v^2 + \rho gh\) is constant. This is energy conservation per unit volume: pressure energy, kinetic energy, and gravitational potential energy can trade off but their total stays the same.
Faster flow, lower pressure
At the same height, where a fluid moves faster, its pressure is lower. Blowing across the top of a strip of paper lifts it; a shower curtain is drawn inward by fast-moving air and water; and two ships sailing close side by side can be pushed together by the low-pressure, fast-moving water between them.
Applications
Atomisers and perfume sprayers use fast air over a tube to lower pressure and draw up liquid. Chimneys draw smoke better when wind blows across their tops. Venturi meters measure flow speed from the pressure drop in a constriction. Aircraft wing lift is often explained partly by Bernoulli's principle, though a full account also involves the wing deflecting air downward.
Torricelli's theorem
Evangelista Torricelli found that fluid draining from a hole a depth h below the surface of a large open tank leaves at \(v = \sqrt{2gh}\), the same speed it would gain falling freely through h. Water 5.0 m above a hole leaves at about 9.9 m/s; water stored at height gives water towers and hydroelectric dams their power.
Worked example
Water flows at 2.0 m/s and a pressure of 2.0 x 10^5 Pa through a horizontal pipe of area 0.040 m² that narrows to 0.010 m². By continuity, the speed in the narrow section is 2.0 x 4 = 8.0 m/s. By Bernoulli, the pressure falls by 0.5 x 1000 x (64 - 4) = 30,000 Pa, to 1.7 x 10^5 Pa. Faster flow in the constriction comes with lower pressure.
Key takeaways
Ideal fluids are incompressible, non-viscous, and flow steadily; real fluids have viscosity. Flow rate Q = Av. The continuity equation, A1 v1 = A2 v2, means fluids speed up in narrow sections. Bernoulli's equation (1738), P + half rho v squared + rho g h constant, expresses energy conservation, so faster flow at the same height means lower pressure. This explains atomisers, chimney draught, Venturi meters, and part of wing lift. Torricelli's theorem gives drain speed as the square root of 2gh.
Flashcard
Incompressible, non-viscous, steady flow
Check your understanding
Water flows through a pipe that narrows to one quarter of its original area. How does its speed change?
