← Back to Physics

The four kinematics equations

When acceleration is constant, four equations connect displacement, velocity, acceleration, and time. Choosing the right one turns most motion problems into short calculations.

When they apply

The kinematics equations hold only when acceleration is constant, as for a car braking steadily or an object in free fall without air resistance. They involve five quantities: displacement, initial velocity, final velocity, acceleration, and time. Each equation leaves out one of the five, so if you know three you can find the other two.

Velocity and time

The first equation follows from the definition of acceleration: \(v = v_0 + at\). It leaves out displacement. A train moving at 12 m/s that accelerates at 0.50 m/s² for 20 s reaches 12 + 0.50 x 20 = 22 m/s.

Displacement and time

The second gives displacement: \(\Delta x = v_0 t + \tfrac{1}{2}at^2\). It leaves out final velocity. From rest with a = 2.0 m/s², an object covers \(\tfrac{1}{2}(2.0)(5.0)^2 = 25\) m in 5.0 s; in twice the time it covers four times as far, because displacement grows with the square of time.

Velocity and displacement

The third leaves out time: \(v^2 = v_0^2 + 2a\Delta x\). It is ideal for stopping distances. A car braking at 5.0 m/s² from 25 m/s stops when v = 0, so \(\Delta x = 25^2 / (2 \times 5.0) = 62.5\) m.

Average velocity form

The fourth leaves out acceleration: \(\Delta x = \tfrac{1}{2}(v_0 + v)t\). With constant acceleration, the average velocity is simply the mean of the initial and final velocities. A plane that goes from 0 to 80 m/s in 40 s on a runway rolls \(\tfrac{1}{2}(0 + 80)(40) = 1600\) m.

A problem-solving method

List what you know and what you want, choose a positive direction, pick the equation that contains your unknown and leaves out the quantity you do not know, solve symbolically, then substitute numbers with units. Finally, check whether the answer is reasonable: a car's stopping distance should be tens of metres, not kilometres.

Speed and stopping distance

Because braking distance is proportional to the square of speed, doubling speed quadruples braking distance. Total stopping distance also includes reaction distance, travelled at constant speed before the brakes are applied. This is why speed limits near schools and in wet conditions matter so much.

Worked example

A driver travelling at 25 m/s sees a hazard. With a 0.80 s reaction time, the car travels 25 x 0.80 = 20 m before braking begins. Braking at 5.0 m/s² then takes 62.5 m, so the total stopping distance is 82.5 m. The braking time is 25/5.0 = 5.0 s. At 12.5 m/s, braking distance would be only a quarter as much, about 15.6 m.

Key takeaways

The four kinematics equations hold only for constant acceleration. Use v = v0 + at when displacement is not needed, the displacement equation when final velocity is not needed, v squared = v0 squared + 2a times displacement when time is not needed, and the average-velocity form when acceleration is not needed. Choose a positive direction and keep signs consistent. Displacement from rest grows with time squared, and braking distance grows with speed squared. Total stopping distance adds reaction distance to braking distance.

Flashcard

Constant acceleration

Condition for the kinematics equations

Free fall, steady braking.

Check your understanding

An object starts from rest with constant acceleration. If it travels 10 m in the first 2 s, how far does it travel in the first 4 s?

Take the unit quiz

← Previous lesson Next lesson →