First law and PV work
The first law of thermodynamics is energy conservation for heat and work. Gases expanding and compressing in engines, pumps, and the atmosphere all obey it.
Internal energy
A system's internal energy U is the total kinetic and potential energy of its particles. For an ideal gas, it depends only on temperature: heat the gas and its molecules move faster, increasing U. Internal energy is a property of the system's state, regardless of how it got there.
The first law
The first law of thermodynamics states \(\Delta U = Q - W\), where Q is the heat added to the system and W the work done by the system on its surroundings. Heat added raises internal energy; work done by the system lowers it. A gas absorbing 5000 J of heat while doing 2000 J of work gains 3000 J of internal energy.
Work done by a gas
When a gas expands against a piston at constant pressure, it does work \(W = P\Delta V\). A gas at \(1.0 \times 10^5\) Pa expanding by 0.020 m³ does 2000 J of work. If the gas is compressed, \(\Delta V\) is negative and work is done on the gas.
PV diagrams
A PV diagram plots pressure against volume. The work done by the gas equals the area under the curve, positive for expansion. In a cycle, such as in an engine, the gas returns to its starting state, so its internal energy change is zero, and the net work equals the area enclosed by the loop.
Four key processes
In an isobaric process, pressure stays constant. In an isochoric process, volume stays constant, so no work is done and all heat changes internal energy. In an isothermal process, temperature stays constant, so for an ideal gas the internal energy is unchanged and heat in equals work out. In an adiabatic process, no heat flows, so work comes entirely from internal energy.
Adiabatic heating and cooling
Compressing a gas quickly, with no time for heat to escape, raises its temperature: a bicycle pump warms up, and diesel engines ignite fuel by compressing air to high temperatures without spark plugs. Rising air expands and cools adiabatically, which is why mountain tops are colder and why clouds form as moist air rises.
Joule's experiments
In the 1840s, James Joule showed that falling weights turning a paddle wheel in water raised its temperature by an amount proportional to the work done, establishing the mechanical equivalent of heat. This showed that heat and work are both forms of energy transfer, foundational to the first law.
Worked example
A gas in a cylinder absorbs 800 J of heat at a constant pressure of 2.0 x 10^5 Pa and expands from 0.0010 m³ to 0.0030 m³. The work done by the gas is 2.0 x 10^5 x 0.0020 = 400 J. By the first law, its internal energy rises by 800 - 400 = 400 J, so its temperature increases. If instead it did 800 J of work, its internal energy and temperature would stay the same.
Key takeaways
Internal energy is the total energy of a system's particles; for an ideal gas it depends only on temperature. The first law says delta U = Q - W, with Q heat added and W work done by the system. At constant pressure, W = P delta V. On a PV diagram, work is the area under the curve, and a cycle's net work is the enclosed area. Isobaric, isochoric, isothermal, and adiabatic processes hold pressure, volume, temperature, or heat fixed. Adiabatic compression heats gas; expansion cools it. Joule showed heat and work are equivalent.
Flashcard
Total energy of a system's particles
Check your understanding
In an isochoric (constant-volume) process, how much work does a gas do?
