Power and potential curves
Power measures how quickly energy is transferred. Potential energy diagrams show at a glance where an object can move and where it will balance.
Power
Power is the rate of doing work or transferring energy: \(P = W/t\), measured in watts, where 1 W = 1 J/s. A 70 kg climber ascending 10 m of stairs does 70 x 9.8 x 10 = 6860 J of work against gravity. Doing it in 7.0 s takes an average power of 980 W; walking up in 20 s takes about 343 W.
Power and velocity
For a constant force along the motion, \(P = Fv\). A car needing a 500 N force to overcome drag and rolling resistance at 30 m/s must deliver 15,000 W, or 15 kW, to the wheels. Since drag grows roughly with speed squared, the power needed grows roughly with speed cubed at high speeds.
Units of power and energy
One horsepower is about 746 W, a unit introduced by James Watt in the 1780s to market steam engines. Electricity bills charge for energy in kilowatt-hours: 1 kWh is 1000 W for 3600 s, or 3.6 million joules. A 2000 W kettle running for 3 minutes uses 0.1 kWh.
Efficiency
Efficiency is useful output energy divided by input energy. No real machine is 100% efficient: car petrol engines typically convert around 25 to 35% of fuel energy into motion, large electric motors often exceed 90%, and LED bulbs convert far more electricity to light than old incandescent bulbs, which wasted most as heat.
Potential energy diagrams
A potential energy diagram plots U against position. A horizontal line at the total energy E shows which positions are allowed: the object can only be where U is less than or equal to E, and the kinetic energy at each point is the gap E minus U. Turning points, where the object stops and reverses, occur where E equals U.
Force from potential
The force is the negative slope of the potential energy curve: \(F = -dU/dx\). Where the curve slopes up to the right, the force points left, towards lower energy. Objects tend to move towards lower potential energy, like a ball rolling downhill.
Equilibrium points
Where the slope is zero, the force is zero: these are equilibrium points. At a minimum, such as the bottom of a valley, equilibrium is stable: a small push produces a restoring force. At a maximum, equilibrium is unstable: a small nudge sends the object away. A pencil on its point is in unstable equilibrium; a marble in a bowl is stable.
Worked example
A 1.0 kg cart moves on a track whose potential energy has a valley at U = 0 J and peaks of 8.0 J on each side. With total energy 4.5 J, the cart is trapped in the valley, oscillating between turning points where U = 4.5 J. At the bottom its kinetic energy is 4.5 J, so its speed is the square root of (2 x 4.5/1.0) = 3.0 m/s. It would need more than 8.0 J to escape.
Key takeaways
Power is work per unit time, in watts; for a constant force along the motion, P = Fv. One horsepower is about 746 W, and 1 kWh is 3.6 million joules. Efficiency is useful output over input and is always below 100%. On a potential energy diagram, an object can only be where U is at most E, kinetic energy is E minus U, and turning points occur where E equals U. Force is the negative slope of U. Minima are stable equilibria and maxima unstable ones.
Flashcard
Rate of doing work
Check your understanding
A 70 kg climber goes up 10 m of stairs in 7.0 s. What average power does she produce against gravity? (g = 9.8 m/s^2)
