Accounting › Section R · Job order and process costing › Topic R.8
Equivalent units in later processes
A second department never starts from scratch: every unit it receives arrives carrying the cost of the work already done on it. Handling that transferred-in cost as a category of its own is the one new idea needed to cost later processes.
Units that arrive with a cost
When Ashdown Candle Works' Pouring department finishes candles, it sends them to Packaging, and their cost goes with them. In June 2026, Pouring transferred 11,200 candles costing $52,640, as worked out in "Equivalent units in the first process". To Packaging, those candles are its starting input, much as wax is to Pouring. Packaging then adds its own materials, labels, lids and boxes, and its own conversion costs for labelling, lidding and packing. Its production cost report uses the same four steps as the first department, with one change: it has three cost categories instead of two. The new category is transferred-in cost, the accumulated cost of all earlier departments' work.
Transferred-in cost as a category
Transferred-in cost behaves like a material added at the very start of the process. A candle cannot be in Packaging at all until Pouring has sent it, so every unit in the department, whether finished or barely started, carries 100% of its transferred-in cost. The equivalent units for transferred-in cost therefore equal all the units completed plus all the units in ending work in process. Keeping transferred-in cost separate from Packaging's own materials and conversion matters, because the completion percentages differ. Folding the earlier departments' costs into this department's materials or conversion would apply the wrong percentage to them and misstate both the units transferred out and ending work in process.
Materials added at the end
Packaging adds its materials when a candle is almost ready to leave: the label, lid and box go on at the end of the process. A candle still in the department at month end has none of them yet, whatever its stage of conversion. Ending work in process is therefore 0% complete for Packaging materials, and the materials equivalent units equal just the units completed. Conversion still builds up evenly, so ending work in process is partly complete for conversion. The three categories can thus have three different percentages for the same units: 100% for transferred-in cost, 0% for end-of-process materials, and somewhere in between for conversion.
Worked example: Packaging, steps 1 and 2
Packaging began June with 800 candles in process. It received 11,200 from Pouring and completed 11,400. Ending work in process is 50% complete for conversion. 1. Units to account for: \(800 + 11{,}200 = 12{,}000\). 2. Ending work in process: \(12{,}000 - 11{,}400 = 600\) candles. 3. Transferred-in equivalent units: \(11{,}400 + 600 \times 100\% = 12{,}000\). 4. Materials equivalent units: \(11{,}400 + 600 \times 0\% = 11{,}400\). 5. Conversion equivalent units: \(11{,}400 + 600 \times 50\% = 11{,}700\). Three categories give three different totals, each describing how much of that kind of work the month's output contains.
The costs to account for
Packaging's beginning work in process carried $3,640 of transferred-in cost (the 800 candles had come from Pouring in May at $4.55 each), no Packaging materials and $384 of conversion cost. During June it received $52,640 of transferred-in cost, used $7,410 of labels, lids and boxes, and incurred $13,656 of conversion costs: direct labour of $7,506 plus overhead of $6,150 applied at $15 per machine hour for 410 hours. Costs to account for are the $4,024 in beginning work in process plus the $73,706 added in June ($52,640 + $7,410 + $13,656), a total of $77,730. The weighted-average method pools the May and June transferred-in costs, so the two batches of candles, poured at different unit costs, are averaged together.
Worked example: Packaging, steps 3 and 4
1. Transferred-in per equivalent unit: \((3{,}640 + 52{,}640) \div 12{,}000 = 4.69\). 2. Materials: \(7{,}410 \div 11{,}400 = 0.65\). 3. Conversion: \((384 + 13{,}656) \div 11{,}700 = 1.20\). 4. A finished, boxed candle costs \(4.69 + 0.65 + 1.20 = 6.54\). 5. Transferred to finished goods: \(11{,}400 \times 6.54 = 74{,}556\). 6. Ending work in process: \(600 \times 4.69 = 2{,}814\) transferred in, no materials, and \(300 \times 1.20 = 360\) conversion.
7. Check: the total equals the costs to account for.
Materials added part-way
Some materials go in at a midpoint. Suppose a department adds a protective sleeve when units are 60% through its process. Units in ending work in process that are 70% complete have passed that point and count as 100% complete for the sleeve; units that are 50% complete count as 0%. The test is simply whether the units have reached the point where the material is added. Materials added gradually, such as a coating sprayed throughout the process, are treated like conversion, at the units' percentage of completion. Each material with its own timing can be given its own category if its cost is large enough to matter.
Building the full unit cost
Each department adds its own layer to the unit cost. Pouring's work is worth $4.69 per candle on average in Packaging's records, and Packaging adds $0.65 of materials and $1.20 of conversion. The $6.54 that reaches finished goods is the full product cost of a candle, the figure managers compare with the $14 selling price and use when deciding prices and product mix. A factory with three or four departments simply repeats the pattern, each department treating the previous one's cost transferred out as its transferred-in cost. How these transfers are recorded in the ledger is shown in "Process costing journal entries".
Common mistakes to avoid
First, leaving out transferred-in cost, which understates every unit. Second, applying the conversion percentage to transferred-in cost; transferred-in units are always 100% complete for that category. Third, giving ending work in process materials that have not yet been added, such as end-of-process packaging. Fourth, adding the earlier department's cost into this department's materials or conversion. Fifth, forgetting the transferred-in cost already sitting in beginning work in process. Sixth, using the earlier department's own unit cost instead of the pooled transferred-in cost per equivalent unit.
Key takeaways
A later department has three cost categories: transferred-in cost, its own materials and its own conversion. Transferred-in cost is always 100% complete. Materials follow their timing: at the end of a process, ending work in process has none. The four steps are unchanged, with units to account for equal to beginning work in process plus units transferred in. Ashdown's Packaging department had 12,000, 11,400 and 11,700 equivalent units, costs per unit of $4.69, $0.65 and $1.20, and sent $74,556 to finished goods at $6.54 a candle, leaving $3,174 in process.
Flashcards
Flashcard
Accumulated cost of earlier departments' work on units received
Test your understanding
Question 1 of 5
A second department has 1,000 units in ending WIP, 30% through conversion, with its own materials added at the end. What are their equivalent units for transferred-in cost, materials and conversion?
Question 2 of 5
A later department has 400 units in beginning WIP, receives 9,600 units and completes 9,200. How many units are in ending WIP?
Question 3 of 5
Transferred-in cost is $2,000 in beginning WIP and $58,000 received this month. Transferred-in equivalent units are 12,500, including 12,000 units completed. What is the transferred-in cost per equivalent unit?
Question 4 of 5
A department adds a material when units are 50% complete. Ending WIP units are 80% complete for conversion. How complete are they for that material?
Question 5 of 5
Costs per equivalent unit are transferred in $3.10, materials $0.40 and conversion $1.50. How much cost moves to finished goods for 5,000 completed units?
