Accounting › Section R · Job order and process costing › Topic R.6
Process costing and conversion costs
When thousands of identical units flow through a series of departments, costs are tracked by department rather than by job. Process costing groups labour and overhead together as conversion costs, and that grouping is the key to costing units that are only partly made.
A factory of identical units
Ashdown Candle Works makes one product, a 220 g soy candle in a glass jar, in two departments. The Pouring department melts wax, adds fragrance, sets wicks in jars and pours. The Packaging department labels each jar, fits a lid and packs it in a box. No candle differs from the next, so Ashdown uses process costing, the system compared with job order costing in "Job order versus process costing". Instead of a job cost sheet, each department collects its costs for the month and spreads them over the candles it worked on, giving an average cost per unit. This topic explains how costs flow in such a system and why labour and overhead are treated as one group.
How costs flow by department
Process costing keeps a separate work in process account for each production department, here WIP–Pouring and WIP–Packaging. Each department's account receives the direct materials it requisitions, its direct labour and the overhead applied to it, usually with a predetermined rate as in "Predetermined overhead rates". When candles leave Pouring, their accumulated cost moves with them into WIP–Packaging as transferred-in cost: to the second department, the poured candles are like a material it starts with. When Packaging finishes candles, their full cost moves to Finished Goods Inventory, and on sale to cost of goods sold. A single Finished Goods Inventory account usually serves, however many departments there are.
Conversion costs
Conversion costs, as defined in "Merchandising, manufacturing, and service costs", are direct labour plus manufacturing overhead: the costs of turning materials into finished product. Process costing groups the two for practical reasons. In automated lines, direct labour is often small, and the people who watch, adjust and clean the machines may be hard to class as direct or indirect, so separating them adds little. More importantly, labour and overhead are usually incurred together and evenly as units move through a process, while materials are not. Treating them as one cost lets a department measure partly finished work with a single completion percentage for conversion.
Worked example: sorting a department's costs
Ashdown's Pouring department reports these May 2026 costs: soy wax $21,400; glass jars $8,800; wicks $1,900; fragrance oil $1,500; pour-line operators $10,920; overhead applied at $15 per machine hour for 560 hours. Staff in Ashdown's retail shop were paid $6,000. 1. Direct materials: wax, jars, wicks and fragrance total $33,600. 2. Direct labour: $10,920. 3. Overhead applied: \(560 \times 15 = 8{,}400\). 4. Conversion costs: \(10{,}920 + 8{,}400 = 19{,}320\). 5. Prime costs: \(33{,}600 + 10{,}920 = 44{,}520\). 6. Retail shop pay is a selling cost, a period cost, so it is left out. Total Pouring cost for May is \(33{,}600 + 19{,}320 = 52{,}920\); labour is not counted twice.
Materials at a point, conversion throughout
Materials are often added at specific points in a process, while conversion happens gradually. In Pouring, wax, wicks, jars and fragrance all go in at the start, so a candle that has just entered the department already has all its Pouring materials, though hardly any conversion. In Packaging, labels, lids and boxes are added at the end, so a candle halfway through Packaging has none of that department's materials but half its conversion. Materials can also be added at a midpoint or in stages. That is why process costing tracks the completion of partly finished units separately for each cost category. A unit can be 100% complete for materials and only 40% complete for conversion.
The idea of equivalent units
At the end of May, Pouring has finished 10,400 candles and holds 1,600 still setting, each 40% of the way through the conversion work. Counting the 1,600 as whole candles would overstate the month's work, and ignoring them would understate it. Equivalent units (EU) restate partly finished units as the number of whole units the same effort would have completed:
For conversion, the 1,600 candles are worth \(1{,}600 \times 40\% = 640\) equivalent units. For materials, added at the start, they are worth all 1,600. Equivalent units are always worked out separately for each cost category, and their full calculation is set out in "Equivalent units in the first process".
Worked example: why physical units mislead
A finishing department spends $54,000 on conversion in a month. It completes 10,000 units and holds 4,000 units half converted at month end, with none at the start. 1. Equivalent units of conversion: \(10{,}000 + 4{,}000 \times 50\% = 12{,}000\). 2. Conversion cost per equivalent unit: \(54{,}000 \div 12{,}000 = 4.50\). 3. Dividing by all 14,000 physical units would give about $3.86, too low, because 4,000 units had only half their conversion. 4. Dividing by the 10,000 finished units would give $5.40, too high, because it charges the finished units for work done on unfinished ones. 5. Only the equivalent-unit figure, $4.50, values finished and unfinished work on the same basis.
The production cost report
Each department summarises its month on a production cost report in four steps. 1. Physical units: units to account for (beginning work in process plus units started or transferred in) and where they went (completed or still in process). 2. Equivalent units for each cost category. 3. Cost per equivalent unit for each category. 4. Assignment of costs to units completed and to ending work in process, with a check that the total equals the costs to account for. This course uses the weighted-average method, which pools the cost of beginning work in process with the month's costs. The alternative FIFO method costs the month's work separately from units carried over and is usually left to advanced courses.
Common mistakes to avoid
First, counting direct labour in both prime and conversion costs and then adding the two groups. Second, assuming materials and conversion are always at the same completion percentage; they rarely are. Third, treating a partly finished unit as a whole unit, or ignoring it. Fourth, forgetting that the second department's units arrive with transferred-in cost. Fifth, including selling or office costs in conversion costs. Sixth, thinking process costing means one work in process account for the factory, rather than one per production department.
Key takeaways
Process costing accumulates costs in a work in process account for each department and averages them over units; costs transfer from department to department with the units, then to finished goods and cost of goods sold. Conversion costs are direct labour plus manufacturing overhead, grouped because they are usually incurred together and evenly. Materials are often added at a point, so completion is tracked separately for materials and conversion. Equivalent units equal units times percent complete. Ashdown's May Pouring costs were $33,600 of materials and $19,320 of conversion. The production cost report follows four steps, here with the weighted-average method.
Flashcards
Flashcard
Costs collected by department and averaged over identical units
Test your understanding
Question 1 of 5
A department's costs are direct materials $50,000, direct labour $20,000 and applied overhead $30,000. What are its conversion costs?
Question 2 of 5
Materials are added at the start of a process. At month end, 2,000 units are 30% through the conversion work. What are their equivalent units?
Question 3 of 5
What happens to the cost of units that leave the first department for the second?
Question 4 of 5
A department spends $36,000 on conversion, completes 8,000 units and has 2,000 units 50% converted at month end, with no beginning units. What is the conversion cost per equivalent unit?
Question 5 of 5
Why does process costing usually group direct labour with overhead?
