Algebra › Section B · Solving linear equations and inequalities › Topic B.1
A general strategy for linear equations
One method solves every linear equation: keep the equation balanced while you undo operations until the variable stands alone. Master the strategy once and hundreds of equations become routine.
Equations, solutions, and balance
An equation is a claim that two expressions are equal, and a solution is a value of the variable that makes the claim true: \(x = 4\) solves \(2x + 3 = 11\) because \(2(4) + 3 = 11\). Solving means finding every such value. The tool is the balance principle: an equation is like a level scale, and adding, subtracting, multiplying or dividing both sides by the same quantity (never dividing by zero) keeps it level. Equations related this way are equivalent: they have exactly the same solutions, so every step must be safe for both sides at once.
The general strategy
Every linear equation, however cluttered, yields to the same order of steps. First clear brackets by distributing. Second, clear fractions by multiplying every term by the least common denominator. Third, collect variable terms on one side and constant terms on the other, using the balance principle. Fourth, divide by the coefficient of the variable. Finally, check by substituting the answer into the original equation. Not every equation needs every step, but the order never changes, and following it turns messy-looking equations into one-step arithmetic.
Worked example: variables on both sides
Solve \(4x + 9 = x - 3\). Subtract \(x\) from both sides so the variable terms sit together: \(3x + 9 = -3\). Subtract 9 from both sides: \(3x = -12\). Divide by 3: \(x = -4\). Checking against the original: \(4(-4) + 9 = -16 + 9 = -7\), and \(-4 - 3 = -7\). Both sides give \(-7\), so the solution is correct. Notice the moves came in reverse order of operations, undoing the addition first and the multiplication second.
Clearing fractions
Fractions make equations look worse than they are. Multiply every term on both sides by the least common denominator, and the fractions vanish. For \(\frac{x}{2} - \frac{x}{5} = 3\), the denominators 2 and 5 have least common multiple 10, so multiply every term by 10: \(5x - 2x = 30\). Then \(3x = 30\), so \(x = 10\). Checking: \(\frac{10}{2} - \frac{10}{5} = 5 - 2 = 3\). The word every matters: multiplying only the fractional terms breaks the balance and produces a different equation.
Clearing decimals
Decimals clear the same way fractions do, using a power of 10. Count the largest number of decimal places on either side, and multiply every term by the matching power of 10. For \(0.6x + 1.5 = 0.2x + 4.7\), the deepest decimal is one place, so multiply everything by 10: \(6x + 15 = 2x + 47\). Then \(4x = 32\), so \(x = 8\). Checking the original: \(0.6(8) + 1.5 = 4.8 + 1.5 = 6.3\), and \(0.2(8) + 4.7 = 1.6 + 4.7 = 6.3\). With two decimal places, such as in \(0.05x\), multiply by 100 instead; the goal is simply whole-number coefficients.
Worked example: brackets on both sides
Solve \(2(x + 5) = 3(x - 2)\). Distribute first: \(2x + 10 = 3x - 6\). Subtract \(2x\) from both sides to gather the variables on the right: \(10 = x - 6\). Add 6: \(16 = x\). Checking: the left side gives \(2(16 + 5) = 2(21) = 42\), and the right side gives \(3(16 - 2) = 3(14) = 42\). Both sides agree, so \(x = 16\) solves the equation. Gathering the variables on the right instead of the left is a perfectly good choice; the arithmetic just looked cleaner that way.
Classifying equations
Most linear equations have exactly one solution: they are conditional equations, true only for particular values. But the variable can cancel out during solving, and then the resulting number statement decides everything. Simplifying \(3(x + 4) = 3x + 12\) gives \(12 = 12\), always true, so every value of \(x\) works: the equation is an identity with infinitely many solutions. Simplifying \(3(x + 4) = 3x + 5\) gives \(12 = 5\), never true, so no value works: the equation is a contradiction with no solution. When the variable vanishes, stop and read the statement left behind.
Worked example: a service bill
A plumber charges a $45 call-out fee plus $65 per hour. After how many hours is a job's bill $240? Let \(h\) be the hours: \(45 + 65h = 240\). Subtract 45 from both sides: \(65h = 195\). Divide by 65: \(h = 3\). Checking: $45 plus \(65 \times 3 = 195\) dollars gives $240. The model assumes the hourly rate applies to whole jobs at a flat rate with no other charges, which is exactly what a written equation forces you to make explicit. Setting up the equation is the algebra; the rest is the strategy from this topic.
Common mistakes to avoid
The classic error is "moving a term across" and forgetting that its sign flips: subtracting \(x\) from \(4x + 9 = x - 3\) gives \(3x + 9 = -3\), and any term you relocate must change sign. Second, clearing fractions must hit every term, or the equation is no longer equivalent. Third, dividing by a coefficient applies to the entire side, not just one term: from \(3x = -12\), divide the whole left side by 3. And never skip the check: substituting back into the original equation takes seconds and catches every one of these slips before they cost you.
Key takeaways
A solution makes an equation true, and the balance principle guarantees that doing the same operation to both sides preserves the solutions. Work in a fixed order: distribute, clear fractions by multiplying every term by the least common denominator, collect variables on one side and constants on the other, then divide by the coefficient, and always check. Equations are conditional (one solution) unless the variable cancels: a true statement means an identity, a false one means no solution. Applied problems differ only in the step that translates the situation into an equation.
Flashcards
Flashcard
A value of the variable that makes the equation true
Test your understanding
Question 1 of 5
Solve 7x - 5 = 2x + 10.
Question 2 of 5
Solve x/4 + x/3 = 7.
Question 3 of 5
Classify the equation 4(x + 2) = 4x + 8.
Question 4 of 5
Solve 3(x - 4) = 5x + 8.
Question 5 of 5
A gym charges a $25 joining fee plus $15 per class. How many classes did a member with a $115 bill take?
