Algebra › Section J · Exponential and logarithmic functions › Topic J.4

Properties of logarithms

Logarithms were invented to make hard arithmetic easy: multiplication becomes addition, division becomes subtraction, and exponents come down to ground level. Three rules do all of it, and they are the exponent laws in a mirror.

Why logs have rules at all

Every logarithm rule is an exponent law read backwards. Powers multiply by adding exponents - \(b^m \cdot b^n = b^{m+n}\) - and since a logarithm is an exponent, multiplying the powers means adding the logs. The three rules of this topic are not new facts to memorize but the familiar exponent arithmetic, translated. Whenever a log rule feels shaky, rewrite the logs as exponents and watch the exponent law confirm it.

The product rule

\(\log_b(MN) = \log_b M + \log_b N\): the log of a product is the sum of the logs. Numerically: \(\log 4 + \log 25 = \log 100 = 2\), because \(4 \cdot 25 = 100\) and \(10^2 = 100\). For four centuries this was the point of logarithms - astronomers and navigators multiplied huge numbers by looking up two logs, adding them, and un-logging the sum. The slide rule, the engineer's tool of choice for 350 years, was this rule made of sliding sticks.

The quotient rule

\(\log_b \frac{M}{N} = \log_b M - \log_b N\): the log of a quotient is the difference of the logs, because dividing powers subtracts exponents - \(b^m \div b^n = b^{m-n}\). So \(\log_2 \frac{32}{4} = \log_2 32 - \log_2 4 = 5 - 2 = 3\), which matches \(\log_2 8 = 3\) since \(\frac{32}{4} = 8\). Division, the operation that slows arithmetic down most, becomes a subtraction under logs - one reason logarithms ruled computation until the calculator arrived.

The power rule

\(\log_b(M^p) = p \log_b M\): an exponent on the input becomes a multiplier outside the log. The rule works in both directions and for any real exponent: \(\log(x^3) = 3\log x\), \(\log(\sqrt{x}) = \log(x^{1/2}) = \tfrac{1}{2}\log x\), and \(\ln \frac{1}{x^2} = -2 \ln x\). This is the workhorse rule of the next topic: to solve an equation with the variable in the exponent, you take the log of both sides and bring the exponent down to eye level.

Worked example: expanding a log

Expand \(\log_2 \frac{16x^3}{y}\). The quotient rule splits the fraction: \(\log_2(16x^3) - \log_2 y\). The product rule splits the numerator: \(\log_2 16 + \log_2 x^3 - \log_2 y\). The power rule brings down the cube, and \(\log_2 16 = 4\): the full expansion is \(4 + 3\log_2 x - \log_2 y\). Expanding follows a fixed order - quotients first, then products, then powers - and each rule application is a mechanical step, not a judgment call.

Worked example: condensing logs

Condense \(3 \ln x + \ln 2 - \ln 8\) into a single logarithm. All three logs share the base \(e\), so the rules run backwards: the power rule lifts coefficients back into exponents, giving \(\ln x^3 + \ln 2 - \ln 8\). The product rule joins the first two: \(\ln(2x^3)\). The quotient rule absorbs the subtraction: \(\ln \frac{2x^3}{8} = \ln \frac{x^3}{4}\). Condensing is what makes exponential equations solvable - one side of an equation must be a single log before the definition can be applied to it.

What has no rule

The three rules cover products, quotients, and powers - and nothing else maps. There is no rule for the log of a sum: \(\log(M + N)\) does not simplify, ever. No rule for products of logs: \((\log M)(\log N)\) stays as is. No rule for logs of logs, square roots of logs, or any other construction - if the input is not a product, quotient, or power, the log is already in its final form. The classic exam trap is a true-looking false rule like \(\log(M + N) = \log M + \log N\); test it once with numbers - \(\log(4 + 25) = \log 29 \approx 1.46\), but \(\log 4 + \log 25 = 2\) - and the trap never catches you again.

Logarithmic scales

Logarithms compress enormous ranges into manageable numbers, which is how sciences measure quantities that span many orders of magnitude. Acidity: \(\text{pH} = -\log\) of the hydrogen ion concentration, so a pH 3 solution carries \(10^{-3}\) versus \(10^{-5}\) at pH 5 - one hundred times more acidic, though the labels differ by 2. Earthquake magnitude: each whole-number step on the Richter scale means roughly ten times the ground motion. Sound: decibels log-scale pressure, so a 20-decibel jump is not "a bit louder" but a hundredfold intensity. Whenever a scale's steps multiply rather than add, a logarithm is running underneath.

Common mistakes to avoid

First, distributing a log over a sum - the rule is for products, and \(\log(M + N)\) is a dead end. Second, writing the quotient rule as \(\frac{\log M}{\log N}\): that fraction is the change-of-base pattern, not a log of a quotient - \(\log_2 \frac{32}{4}\) is 3, not \(\frac{5}{2}\). Third, applying rules across different bases: \(\log_2 M + \log_3 N\) cannot combine; every rule requires one shared base. Fourth, dropping a sign when condensing a subtraction - the minus must become a division. Fifth, forgetting that coefficients ride along as exponents when condensing: \(3\ln x\) is \(\ln x^3\), not \(\ln 3x\).

Key takeaways

The three rules of logarithms mirror the exponent laws: \(\log_b(MN) = \log_b M + \log_b N\), \(\log_b \frac{M}{N} = \log_b M - \log_b N\), and \(\log_b(M^p) = p\log_b M\), all sharing a single base. Expand by applying quotients, then products, then powers; condense by running the rules backwards - coefficients become exponents, sums become products, differences become quotients. Nothing else simplifies: the log of a sum has no rule, and testing a suspicious "rule" with numbers exposes it instantly. Log scales - pH, Richter, decibels - use these rules to tame quantities spanning orders of magnitude.

Flashcards

Flashcard

Where the rules come from

Exponent laws in a mirror

b^m times b^n = b^(m+n).

Test your understanding

Question 1 of 5

What is log 4 + log 25?

Question 2 of 5

Expand log base 2 of (16x^3 / y).

Question 3 of 5

What simplifies log(M + N)?

Question 4 of 5

Condense 3 ln x + ln 2 - ln 8 into one logarithm.

Question 5 of 5

A pH 3 solution compared to a pH 5 solution is how much more acidic?

← Previous topicNext topic →