Anatomy & Physiology › Section P · Blood › Topic P.4

Hemostasis

A small cut stops bleeding within minutes because three responses overlap: the vessel narrows, platelets plug the gap and a cascade of plasma proteins weaves a fibrin mesh. The same system must also stay switched off everywhere else, and then dissolve the clot once the vessel has healed.

Three overlapping steps

Hemostasis is the process that stops blood loss from a damaged vessel. Its three steps begin almost together and reinforce one another: the vessel constricts (vascular spasm), platelets gather into a plug, and plasma proteins form a clot (coagulation). It handles small vessels and minor wounds well; a large ruptured vessel usually needs medical help. Failure of any step can cause hemorrhage, excessive bleeding. The opposite failure, clotting inside intact vessels, is just as dangerous, so healthy hemostasis is a balance: fast at the injury, held in check everywhere else.

Vascular spasm

When a vessel wall is cut or crushed, the smooth muscle in its wall contracts sharply, narrowing the vessel and reducing blood flow through the damaged part. Circular smooth muscle constricts the vessel; in larger vessels, longitudinal smooth muscle can also pull the cut end back into the surrounding tissue. Direct injury to the muscle, endothelins released by the vessel's lining cells, and pain reflexes trigger the spasm, and platelet chemicals soon add to it. Vascular spasm usually lasts up to about 30 minutes, buying time for the platelet plug and the clot to form.

The platelet plug

Normally the smooth endothelium keeps platelets moving. A break exposes collagen fibres in the underlying connective tissue. 1. Adhesion: platelets stick to the exposed collagen, helped by von Willebrand factor, a plasma glycoprotein that bridges platelets and collagen. 2. Activation: the platelets swell, grow spiky projections and become sticky, and release chemicals from their granules. 3. Aggregation: released adenosine diphosphate (ADP) and thromboxane A2 make passing platelets stick to the first layer, and serotonin and thromboxane A2 strengthen vascular spasm. Each new platelet releases more of these signals, a positive feedback loop. The plug can seal a tiny hole but stays loose until fibrin reinforces it.

Clotting factors

Clotting factors, mostly plasma proteins, circulate in inactive forms; each, once activated, activates the next, amplifying a small trigger. The factors are numbered in Roman numerals by order of discovery, not by their order in the cascade, and number VI is no longer used. Factor I is fibrinogen, factor II is prothrombin, factor III is tissue factor, and factor IV is calcium ions, needed at several steps. Most factors are made by the liver. The liver needs vitamin K to make functional forms of factors II, VII, IX and X; vitamin K comes from the diet and from bacteria in the large intestine.

Two ways to start the cascade

The extrinsic pathway, also called the tissue factor pathway, begins when blood meets tissue factor, a membrane protein on cells outside the vessel lining. Tissue factor binds factor VII, and with calcium the complex activates factor X within seconds. The intrinsic pathway uses factors already in the blood. It begins when factor XII is activated by contact with negatively charged surfaces, such as glass in a test tube. Factor XII activates XI, XI activates IX, and IX joins with factor VIII to activate factor X, over a few minutes. Current models hold that tissue factor starts clotting in the body, while the intrinsic factors amplify it.

The common pathway

Both routes meet at activated factor X. Together with factor V and calcium ions on platelet membranes, it forms prothrombinase, an enzyme complex that converts prothrombin to thrombin. Thrombin is the central enzyme of clotting. It cuts soluble fibrinogen into fibrin monomers, which join into long insoluble strands. Factor XIII (fibrin-stabilising factor), itself activated by thrombin, cross-links the strands into a stable mesh that traps platelets and erythrocytes: the clot. Thrombin also activates more platelets and factors V, VIII and XI, so once a little thrombin forms, much more follows. This positive feedback makes clotting fast at the injury, which is why the system needs strong brakes elsewhere.

Worked example: a cut finger

A kitchen knife nicks a small artery in a fingertip. Trace hemostasis in order. 1. The vessel's smooth muscle contracts at once, narrowing it: vascular spasm. 2. Collagen is exposed, and platelets adhere with the help of von Willebrand factor. 3. Activated platelets release ADP and thromboxane A2, and more platelets pile on: aggregation by positive feedback. 4. Tissue factor from the damaged tissue activates factor VII, which activates factor X. 5. Factor X with factor V forms prothrombinase, making thrombin, which converts fibrinogen to fibrin. 6. Factor XIII cross-links the fibrin, and the bleeding stops. 7. Check: all three steps are under way within minutes.

Retraction, repair and dissolving the clot

Soon afterwards, contractile proteins in trapped platelets pull on the fibrin, drawing the wound edges together and squeezing out serum: clot retraction. Once the vessel is repaired, the clot is removed by fibrinolysis: tissue plasminogen activator from endothelial cells converts the plasma protein plasminogen to plasmin, an enzyme that digests fibrin. Several brakes keep clotting local. Intact endothelium releases prostacyclin and nitric oxide, which discourage platelet adhesion. Antithrombin inactivates thrombin and factor X, the protein C system inactivates factors V and VIII, and heparin, from basophil and mast cell granules, boosts antithrombin, as similar molecules on endothelial surfaces do.

Worked example: inheriting hemophilia A

Hemophilia A, the commonest form of hemophilia, is a lack of functional factor VIII, and its gene is on the X chromosome. A woman who is a carrier (one normal and one affected X) has children with a man who has typical clotting. 1. She passes either X with equal chance; he passes either his X or his Y. 2. Sons receive his Y and one of her X chromosomes, so each son has a 1 in 2 chance of hemophilia. 3. Daughters receive his normal X, so none is expected to have hemophilia, but each has a 1 in 2 chance of being a carrier. 4. Check: across all children, the chance of an affected child is 1 in 4. See also "Patterns of inheritance".

When hemostasis fails or overshoots

Too little clotting causes bleeding. Thrombocytopenia, too few platelets, causes easy bruising and bleeding from small vessels. In hemophilia A or B, a missing factor VIII or IX slows the intrinsic amplification, so people bleed for longer, including into joints. Vitamin K deficiency, as in newborns, impairs four factors at once. Too much clotting causes thrombosis: a thrombus is a clot formed inside an unbroken or slightly damaged vessel, which can narrow or block it. Slow flow in leg veins during long immobility can cause deep vein thrombosis. A piece that breaks free and travels is an embolus and may lodge in the lungs. Real symptoms need a qualified professional.

Common mistakes to avoid

First, assuming the factor numbers give the order of the cascade; they give the order of discovery. Second, saying thrombin turns into fibrin; thrombin is the enzyme that converts fibrinogen into fibrin. Third, treating the extrinsic and intrinsic pathways as rivals; both activate factor X. Fourth, calling vitamin K a clotting factor; it is needed by the liver to make factors II, VII, IX and X. Fifth, confusing a thrombus, a clot that stays where it formed, with an embolus, which travels.

Key takeaways

Hemostasis has three overlapping steps: vascular spasm, a platelet plug and coagulation. Platelets adhere to collagen with von Willebrand factor, then activate and aggregate by positive feedback. The extrinsic (tissue factor, VII) and intrinsic (XII, XI, IX, VIII) pathways both activate factor X, which with factor V makes thrombin; thrombin converts fibrinogen to fibrin, and factor XIII cross-links it. Calcium and the vitamin K-dependent factors are essential. Fibrinolysis by plasmin and anticoagulants such as antithrombin and heparin keep clotting local and temporary.

Flashcards

Flashcard

Hemostasis

Stopping blood loss: vascular spasm, platelet plug, coagulation

Failure causes hemorrhage.

Test your understanding

Question 1 of 5

In the common pathway, what is the direct job of thrombin?

Question 2 of 5

Why does a severe vitamin K deficiency impair blood clotting?

Question 3 of 5

A man with hemophilia A and a woman who is not a carrier have children. What is expected?

Question 4 of 5

Which sequence describes platelet plug formation?

Question 5 of 5

What is the main difference between a thrombus and an embolus?

← Previous topicNext topic →