Anatomy & Physiology › Section J · The muscular system › Topic J.1

Muscle interactions, fascicles, and levers

No muscle works alone. Every movement is a team effort of muscles that pull, assist, steady and brake, and the way a muscle's fibres are arranged and where it attaches to bone decide whether it is built for force, for speed or for range.

Muscles pull on bones across joints

Most skeletal muscles attach to bones by tendons, bands of dense regular connective tissue, and cross at least one joint. Contracting, a muscle pulls two bones towards each other and changes the joint angle, producing the movements of Types of body movements. Because muscles only pull, a joint that moves both ways needs muscles on opposite sides. Some skeletal muscles move no bones: facial muscles pull on skin, sphincters close openings and the diaphragm changes the volume of the chest.

Origin and insertion

Each muscle has two kinds of attachment. The origin is the end attached to the bone that stays relatively fixed during a movement; the insertion is the end attached to the bone that moves. In the limbs the origin is usually proximal. When you bend your elbow, the biceps brachii pulls from its origins on the scapula towards its insertion on the radius, and the forearm rises. The labels describe the usual movement, not a law: if the distal bone is fixed, as when you pull yourself up to a bar, the muscle moves the proximal bone instead.

Prime movers, synergists and fixators

The muscle chiefly responsible for a movement is its prime mover, or agonist. Muscles that assist it are synergists. In elbow flexion with the palm facing up, the biceps brachii is often named the prime mover, with the brachialis, which lies deep to it, and the brachioradialis of the forearm as synergists; many anatomists note that the brachialis does much of the work in every forearm position. A fixator is a synergist that holds the bone of the prime mover's origin still. When you lift a cup, the trapezius and rhomboids steady the scapula so the biceps moves the forearm, not the shoulder blade.

Antagonists

An antagonist produces the opposite action to the prime mover; the triceps brachii, on the back of the arm, opposes the elbow flexors. Antagonists hold limbs in position by balancing the agonist, and they brake fast movements, such as stopping a punch before the elbow locks. The roles swap with the movement. When the knee extends, the quadriceps femoris on the front of the thigh are the agonists and the hamstrings behind are the antagonists; when the knee bends, the reverse is true. Likewise, the forearm's finger flexors are opposed by the extensor digitorum.

Worked example: roles in a dumbbell curl

Analyse lifting and then lowering a dumbbell with the elbow, palm up. 1. Joint and movement: the elbow flexes on the way up and extends on the way down. 2. Prime mover: the biceps brachii, whose two heads arise from the scapula (the long head from the supraglenoid tubercle, the short head from the coracoid process) and insert on the radial tuberosity. 3. Synergists: brachialis and brachioradialis. 4. Fixators: scapular muscles steady the shoulder. 5. Antagonist: the triceps brachii, which relaxes as the elbow flexes. 6. Lowering: gravity extends the elbow, but the biceps stays active and lengthens, an eccentric contraction, so the elbow flexors still control the movement.

Fascicle arrangements

The perimysium groups fibres into fascicles, and their layout gives each muscle its shape. In parallel muscles, the commonest type, fascicles run along the muscle's long axis; some are strap-like, such as the sartorius, and some are fusiform, spindle-shaped with a thick belly, such as the biceps brachii. Circular muscles, or sphincters, ring an opening and close it when they contract, as the orbicularis oris does around the mouth. Convergent muscles fan out over a wide area and narrow to one attachment, as the pectoralis major and temporalis do. In pennate muscles, short fascicles join a tendon running through the muscle at an angle, like the barbs of a feather.

Pennate muscles and what arrangement buys

Pennate muscles come in three forms. Unipennate muscles have fascicles on one side of the tendon, as in the extensor digitorum; bipennate muscles have them on both sides, as in the rectus femoris; multipennate muscles have several tendon branches with fascicles between them, as in the deltoid. Because their fibres pull at an angle, pennate muscles move their tendons less far, but they pack in more fibres for their size and so produce more force. Long parallel fibres give the opposite trade: more shortening and speed, less force. Arrangement also allows control: the deltoid's anterior fibres alone flex and medially rotate the arm, while the whole muscle abducts it.

Bones as levers

A lever is a rigid bar that turns about a fixed point, the fulcrum. In the body, a bone is the lever, a joint is the fulcrum, the muscle's pull at its insertion is the effort, and the weight of the body part plus anything it carries is the load. The effort arm is the distance from fulcrum to effort, and the load arm is the distance from fulcrum to load. With forces at right angles to the lever, the mechanical advantage is

\text{MA} = \frac{\text{effort arm}}{\text{load arm}}

Above 1, the lever trades distance for force; below 1, the muscle must pull harder than the load but moves it farther and faster.

Three classes of lever

In a first-class lever the fulcrum lies between effort and load, like a seesaw: when you nod, the head pivots on the atlas while muscles at the back of the neck pull down behind and the face's weight lies in front. In a second-class lever the load lies between fulcrum and effort, like a wheelbarrow. The usual example is rising onto your toes, with the ball of the foot as fulcrum and the calf muscles pulling up on the heel, though some biomechanists argue this oversimplifies the foot. In a third-class lever, the commonest in the body, the effort lies between fulcrum and load, as with the biceps inserting near the elbow.

Worked example: holding a weight at the elbow

A horizontal forearm holds a 50 N weight 35 cm from the elbow. The biceps inserts 4.0 cm from the joint and pulls straight up. Ignoring the forearm's own weight, what force must the biceps exert? 1. Class: the effort lies between fulcrum and load, so it is third class. 2. Balance the turning effects: effort × 4.0 cm = 50 N × 35 cm. 3. Effort = 1750 ÷ 4.0 = 437.5 N, about 438 N. 4. MA = 4.0 ÷ 35 ≈ 0.114, so the muscle pulls almost nine times the load. 5. Pay-off: the hand moves 35 ÷ 4.0 = 8.75 times as far, and as fast, as the insertion, which suits quick, wide movements.

Common mistakes to avoid

First, assuming the origin never moves: if the distal bone is fixed, the muscle moves the proximal one. Second, treating agonist and antagonist as fixed labels: they swap when the movement reverses. Third, thinking the antagonist is idle: it positions and brakes. Fourth, believing pennate muscles move farther: they produce more force but shorten less. Fifth, assuming body levers favour force: most are third class, with MA below 1, trading force for speed and range.

Key takeaways

Muscles pull across joints from the origin, on the fixed bone, towards the insertion, on the moving bone. The prime mover (agonist) does most of the work, synergists assist, fixators steady the origin, and antagonists oppose, position and brake; roles swap when the movement reverses. Fascicles may be parallel, circular, convergent or pennate; pennate muscles give force, parallel ones range and speed. Bones are levers, joints fulcrums and muscles efforts, with MA = effort arm ÷ load arm. First-class levers have the fulcrum in the middle, second-class the load and third-class, the commonest, the effort.

Flashcards

Flashcard

Origin

Attachment on the bone that stays relatively fixed

Usually proximal in the limbs.

Test your understanding

Question 1 of 5

During elbow flexion, which muscle acts as the antagonist?

Question 2 of 5

A muscle inserts 5 cm from a joint and holds a 60 N load 30 cm from the joint, with all forces at right angles. What force must the muscle exert?

Question 3 of 5

In which class of lever does the effort lie between the fulcrum and the load?

Question 4 of 5

Compared with a parallel muscle of the same size, what does a pennate muscle typically offer?

Question 5 of 5

What is a fixator?

← Previous topicNext topic →