Anatomy & Physiology › Section H · Joints › Topic H.4
Selected synovial joints and joint development
Each major joint is a compromise between moving freely and staying in place. Looking at the spine, jaw, shoulder, elbow, hip, knee and ankle one by one shows how bone shape, ligaments and muscles strike that balance, and the topic ends with how joints form in the embryo.
Joints of the spine and jaw
Besides the intervertebral discs, neighbouring vertebrae meet at zygapophysial (facet) joints, plane joints between their articular processes. Their angles set each region's movement: the neck moves freely in every direction, the rib-bound thoracic region is fairly stiff, and the lumbar region flexes and extends well but rotates little. At the atlanto-occipital joint, the occipital condyles rock on the atlas for nodding yes; at the atlantoaxial joint, the atlas turns around the dens for shaking the head no. The temporomandibular joint (TMJ) joins the mandible's condyle to the temporal bone across an articular disc; opening the mouth combines a hinge with a forward glide.
The shoulder joint
The shoulder, or glenohumeral joint, is a ball-and-socket joint between the large head of the humerus and the small, shallow glenoid cavity, only about a third the size of the head. A rim of fibrocartilage, the glenoid labrum, deepens the socket slightly. The capsule is thin and loose, and its intrinsic ligaments are weak. The result is the widest range of any joint but little passive stability. Its main support is the rotator cuff: the tendons of four muscles (supraspinatus, infraspinatus, teres minor and subscapularis) fuse with the front, top and back of the capsule and hold the head in the socket. Because the front and underside are least supported, most dislocations push the head forwards and downwards.
The elbow joint
The elbow is a uniaxial hinge, formed mainly where the trochlea of the humerus meets the trochlear notch of the ulna. Two other joints share its capsule: the humeroradial joint between capitulum and radial head, and the proximal radioulnar joint. The capsule is thin in front and behind but strengthened at the sides by collateral ligaments that block sideways movement and hyperextension. The ulnar collateral ligament runs from the medial epicondyle to the ulna and can be damaged by repeated hard throwing. The radial collateral ligament runs from the lateral epicondyle into the annular ligament, a ring that wraps the radial head and lets it rotate during supination and pronation.
The hip joint
At the hip, the femoral head sits in the deep acetabulum, made deeper still by a fibrocartilage rim, the acetabular labrum. Where the shoulder favours range, this weight-bearing ball-and-socket joint favours stability. Its capsule is thick and reinforced by three spiralling intrinsic ligaments named for the hip bone parts they start from: iliofemoral, pubofemoral and ischiofemoral. Extending the hip winds them tighter, drawing the femoral head into the socket, so a person can stand upright with little muscle effort, and extension beyond vertical is very limited. A small ligament inside the capsule, running to the femoral head, adds little strength but carries an artery to the head.
The knee joint
The knee, the body's largest joint, holds three articulations in one capsule: femoropatellar, medial tibiofemoral and lateral tibiofemoral. It works mainly as a hinge, the rounded femoral condyles rolling and gliding on the flatter tibial condyles; it can rotate a little only when bent. In full extension, a slight rotation of femur on tibia locks the knee in its most stable position, and a small muscle behind the knee, the popliteus, unlocks it to begin flexion. Two C-shaped fibrocartilage menisci, medial and lateral, sit on the tibial condyles, deepen the fit and cushion the bones. The quadriceps, via the patella and patellar ligament, extends and steadies the knee.
Knee ligaments
Four main ligaments hold the knee. The two collaterals resist sideways bending of the straight knee. The tibial collateral ligament (medial collateral ligament) runs from femur to tibia on the medial side and is fused to the capsule and to the medial meniscus. The fibular collateral ligament (lateral collateral ligament) runs from femur to fibula on the lateral side, outside the capsule. Inside the capsule are the two cruciate ligaments, which cross like an X. The anterior cruciate ligament stops the tibia sliding forwards under the femur and resists hyperextension. The posterior cruciate ligament stops the tibia sliding backwards, as when the bent knee strikes a car dashboard.
The ankle and foot joints
The ankle, or talocrural joint, is a hinge in which the top of the talus sits under the tibia, gripped on each side by the medial and lateral malleoli. It allows only dorsiflexion and plantar flexion. Inversion and eversion come from the plane joints between tarsal bones, chiefly the subtalar joint between talus and calcaneus. Medially, the broad deltoid ligament resists excess eversion. Laterally, three smaller ligaments resist excess inversion: the anterior and posterior talofibular ligaments, from the lateral malleolus to the talus, and the calcaneofibular ligament, from the fibula to the calcaneus.
Worked example: a blow to the side of the knee
A typical textbook case: a player standing on a planted, straight leg is hit hard on the lateral side of the knee. Predict the damage in order. 1. The blow pushes the knee medially, so the medial side of the joint is forced open. 2. The structure resisting that opening is the tibial collateral ligament, so it stretches or tears first. 3. The medial meniscus is fused to that ligament, so a stronger force tears it too. 4. With the leg planted and twisted, the anterior cruciate ligament may rupture next. 5. Conclude: this sequence is often called the terrible triad; the lateral collateral ligament is spared, because that side was compressed. Real knee injuries need a qualified professional.
Worked example: rolling an ankle
A typical textbook case: a runner lands on the outer edge of the foot, which turns sharply so that the sole faces inwards. 1. Name the movement: the sole turning medially is inversion, here forced beyond its range. 2. Find which side is stretched: inversion opens the lateral side of the ankle. 3. List the ligaments there: anterior talofibular, calcaneofibular and posterior talofibular. 4. Order the risk: the anterior talofibular ligament is usually injured first, then the calcaneofibular. 5. Contrast: the deltoid ligament lies on the compressed medial side and is spared. For study only; an injured ankle needs a qualified professional.
How joints develop
Joints form from mesenchyme along with the bones they connect. In the skull, mesenchyme left between developing bones becomes the fibrous tissue of fontanelles and then sutures. In the limbs, from the sixth week, mesenchyme forms hyaline cartilage models of the bones. A synovial joint forms in the joint interzone between neighbouring models: a gap opens in its centre and becomes the joint cavity, helped by fluid-attracting hyaluronan from its cells and by early movement, while surrounding mesenchyme forms the articular capsule and ligaments. Ossification begins by about week 12, but hyaline cartilage remains as articular cartilage and, until growth ends, as epiphyseal plates.
Common mistakes to avoid
First, putting nodding and head-turning at the same joint: yes is the atlanto-occipital joint, no is the atlantoaxial joint. Second, crediting the shoulder's stability to its ligaments: the rotator cuff muscles do most of that work. Third, swapping the cruciates: the anterior cruciate stops the tibia moving forwards, the posterior cruciate stops it moving backwards. Fourth, placing inversion at the ankle joint: it occurs at the subtalar and other intertarsal joints. Fifth, expecting a lateral blow to tear the lateral collateral ligament.
Key takeaways
The atlanto-occipital joint nods the head and the atlantoaxial joint turns it. The shoulder trades stability for range and relies on the rotator cuff; the hip trades range for stability, locked by three spiral ligaments. The elbow and knee are hinges; the knee has two menisci, two collateral and two cruciate ligaments. The ankle is a hinge; inversion and eversion occur at the subtalar joint. Synovial joints develop in the interzone between cartilage models, where a central gap becomes the cavity.
Flashcards
Flashcard
Plane joints between vertebral articular processes
Test your understanding
Question 1 of 5
What provides the main support that keeps the head of the humerus in the glenoid cavity?
Question 2 of 5
Which ligament stops the tibia sliding forwards under the femur?
Question 3 of 5
A runner rolls an ankle so the sole faces sharply inwards. Which ligament is most likely injured first?
Question 4 of 5
Why can a person stand upright at the hip with little muscle effort?
Question 5 of 5
How does the cavity of a limb synovial joint form in the embryo?
