Anatomy & Physiology › Section H · Joints › Topic H.2

Synovial joints

Synovial joints are the body's moving parts: the shoulder, knee, knuckles and dozens more. They share one design, two smooth surfaces meeting in a lubricated cavity, and the shapes of those surfaces decide which movements each joint allows.

The defining feature: a joint cavity

What sets a synovial joint apart is its joint cavity, a thin space in which the bone surfaces meet without being joined to each other. That freedom is why every synovial joint is a diarthrosis, a freely movable joint, unlike the fibrous and cartilaginous joints of the previous topic, Classifying joints: fibrous and cartilaginous. They are the commonest joints, especially in the limbs. The price of mobility is stability: since the bones are not tied directly, other structures must hold them in place.

Capsule, cartilage, membrane and fluid

Four structures form every synovial joint. The articular capsule is a sleeve of fibrous connective tissue attached to each bone just beyond its joint surface; it encloses the joint cavity. Each joint surface is covered by articular cartilage, a thin, smooth layer of hyaline cartilage; the two layers are not joined, so they glide over each other with very little friction. A thin synovial membrane lines the inside of the capsule, except over the cartilage. Its cells secrete synovial fluid, a thick, slippery liquid that lubricates the surfaces and nourishes the articular cartilage, which has no blood vessels of its own.

Ligaments and muscles

Ligaments are strong bands of dense fibrous connective tissue that join bone to bone. They permit a joint's normal movements but limit their range, preventing excess or abnormal motion. They are grouped by position: an extrinsic ligament lies outside the capsule, an intrinsic ligament is built into the capsule wall, and an intracapsular ligament lies inside it. Muscles add support too. A tendon joins muscle to bone, and when the load on a joint rises, the muscles crossing it contract harder, so their tendons act as dynamic ligaments. This matters most at the shoulder, whose ligaments are relatively weak.

Discs, menisci, fat pads and bursae

Some synovial joints contain a pad of fibrocartilage between the bones: a small, oval articular disc or a larger, C-shaped meniscus. Depending on the joint, a disc may bind the bones (the sternoclavicular joint), cushion them (the two menisci of the knee) or smooth their movement (the temporomandibular joint). Fat pads also cushion some joints. Outside joints, a bursa is a thin sac of lubricating fluid placed where skin, muscle or tendon would otherwise rub on bone. Some lie under the skin, as over the kneecap and elbow tip; others lie beneath muscles or tendons. A tendon sheath is a similar, smaller sac wrapped around a tendon where it crosses a joint.

Pivot and hinge joints

Synovial joints are grouped into six types by the shape of their surfaces. At a pivot joint, a rounded part of one bone turns inside a ring made partly of bone and partly of ligament. The movement is rotation about one axis, so pivot joints are uniaxial. Examples are the atlantoaxial joint, where the atlas turns around the dens of C2 as you shake your head, and the proximal radioulnar joint. At a hinge joint, a convex surface fits a concave one and allows only bending and straightening, so hinges are also uniaxial. Examples are the elbow (trochlea in the trochlear notch), the knee, the ankle and the interphalangeal joints of fingers and toes.

Condyloid and saddle joints

At a condyloid (ellipsoid) joint, an oval, convex surface sits in a shallow, oval hollow. It moves in two planes, so it is biaxial: forwards and backwards, and side to side, but without rotation. Examples are the knuckles (metacarpophalangeal joints), which bend and spread the fingers, and the radiocarpal joint of the wrist, where the scaphoid, lunate and triquetrum sit in a shallow hollow at the end of the radius. At a saddle joint, each surface curves up along one axis and down along the other, so the two fit like a rider on a saddle. Saddle joints are also biaxial; the joint between the trapezium and the thumb's metacarpal is the classic one, and the sternoclavicular joint is another.

Plane and ball-and-socket joints

At a plane (gliding) joint, flat or slightly curved surfaces of similar size slide over each other. By shape alone they could move in several directions, so they are classed as multiaxial, but ligaments and neighbouring bones usually limit them to small glides. Examples are the joints between carpal bones, between tarsal bones, between the articular processes of neighbouring vertebrae, and the acromioclavicular joint. At a ball-and-socket joint, a rounded head sits in a cup-shaped socket. These are multiaxial and have the greatest range of motion of any joint. The shoulder (glenohumeral) and hip joints are the body's only ball-and-socket joints.

Worked example: naming a joint by its shape

Classify three joints from a description of their surfaces. 1. Joint A: a peg of one bone turns inside a ring of bone and ligament. Rotation about one axis is the signature of a pivot joint, uniaxial; the atlantoaxial joint fits. 2. Joint B: two surfaces each curve inwards one way and outwards the other way. That double curvature defines a saddle joint, biaxial, as at the base of the thumb. 3. Joint C: two flat surfaces of similar size slide a short way over each other. That is a plane joint, as between carpal bones. 4. Check against movement: the head turns at A, the thumb swings in two planes at B, and carpals glide at C.

Worked example: a sore, swollen kneecap

A typical textbook case: a floor installer who kneels all day without pads develops a soft swelling over the kneecap. Which structure is involved? 1. Locate the swelling: in front of the patella, just under the skin. 2. Ask what normally lies there: a subcutaneous bursa, the prepatellar bursa, which lets skin glide over bone. 3. Link cause and site: constant pressure and friction on that bursa can inflame it. 4. Name it: inflammation of a bursa is bursitis, here prepatellar bursitis. 5. Contrast: arthritis affects the joint itself, whereas this swelling sits outside the capsule. For study only; joint pain or swelling needs a qualified professional.

Arthritis and synovial joints

Arthritis is joint inflammation, bringing pain, swelling and stiffness. Osteoarthritis, the most common form, is linked to ageing and long-term stress on a joint: the articular cartilage gradually thins, the bone beneath thickens and roughens, and movement becomes painful. Rheumatoid arthritis is an autoimmune disease in which the immune system attacks the synovial membrane, which becomes inflamed and thickened and can erode cartilage and bone, often in matching joints on both sides of the body. Gout results from uric acid crystals deposited in a joint, often the base of the big toe. Clinicians may treat severe joint damage with joint replacement surgery, arthroplasty.

Common mistakes to avoid

First, saying synovial fluid has its own blood supply to feed cartilage: articular cartilage has no blood vessels and relies on the fluid. Second, confusing ligaments and tendons: ligaments join bone to bone, tendons muscle to bone. Third, calling a bursa part of the joint cavity: bursae are separate sacs, mostly outside the joint. Fourth, listing the knee as ball-and-socket: only the shoulder and hip are. Fifth, calling condyloid joints multiaxial: they move in two planes and do not rotate.

Key takeaways

Synovial joints have a joint cavity and are all diarthroses. Their core parts are the articular capsule, hyaline articular cartilage, the synovial membrane and synovial fluid, supported by ligaments and the tendons of crossing muscles. Some add articular discs, menisci or fat pads; bursae and tendon sheaths reduce friction outside joints. The six types are pivot and hinge (uniaxial), condyloid and saddle (biaxial), and plane and ball-and-socket (multiaxial). Osteoarthritis wears away cartilage, rheumatoid arthritis attacks the synovial membrane, and gout deposits uric acid crystals.

Flashcards

Flashcard

Joint cavity

Fluid-filled space where synovial joint surfaces meet

The defining feature of a synovial joint.

Test your understanding

Question 1 of 5

What nourishes the articular cartilage of a synovial joint?

Question 2 of 5

Which synovial joint type is found at the base of the thumb, between the trapezium and the first metacarpal?

Question 3 of 5

How are the knuckle (metacarpophalangeal) joints classified?

Question 4 of 5

Which joints are the body's only ball-and-socket joints?

Question 5 of 5

A person who kneels all day develops swelling just in front of the kneecap. Which structure is most likely inflamed?

← Previous topicNext topic →