Astronomy › Section K · The Sun › Topic K.3
Solar activity above the photosphere
Sunspots are only the visible footprints of solar magnetism. Above them, in the chromosphere and corona, the same fields build glowing clouds, towering arches of gas and the most violent explosions in the solar system.
Looking above the surface
Each layer of the solar atmosphere is best seen in light that matches its temperature. The chromosphere, at about 10,000 K, glows strongly in particular spectral lines of hydrogen and ionised calcium, so astronomers photograph it through filters that pass only a very narrow band around one of those lines; the red hydrogen line at 656.3 nm is the favourite. The corona, at over a million kelvin, shines mainly in extreme ultraviolet light and X-rays, which Earth's air absorbs, so it is watched from spacecraft such as NASA's Solar Dynamics Observatory. Choosing the wavelength is like choosing which floor of a building to look at.
Plages: bright chromospheric clouds
Photographs taken in hydrogen or calcium light show bright, patchy regions in the chromosphere around sunspot groups. These are plages, from the French word for "beach". They are hotter and denser than the chromosphere around them, and they sit where magnetic field emerges through the surface. A plage contains all the Sun's elements; hydrogen and calcium are simply the ones whose lines are bright and easy to image. Plages often appear before the sunspots of an active region and fade after the spots have gone.
Prominences and filaments
Prominences are huge structures of relatively cool, dense plasma, often near 10,000 K, suspended in the million-degree corona by magnetic fields, usually above or near active regions. Seen at the Sun's edge against dark sky, they appear as bright arches or curtains; seen against the bright disc, the same structures look like dark ribbons called filaments. Quiescent prominences can hang almost unchanged for days or even weeks. Eruptive prominences break loose and rush outward at hundreds of kilometres per second, and some have reached more than a million kilometres above the photosphere.
Worked example: sizing a prominence
A prominence at the Sun's edge stands 2.0 arcminutes high as seen from Earth. How tall is it? Use the small-angle rule: size = distance × angle in radians. 1. Convert the angle: \(2.0' = \frac{2.0}{60}\) degree, and \(\frac{2.0}{60} \times \frac{\pi}{180} \approx 5.82 \times 10^{-4}\) rad. 2. Distance: 1 AU, about \(1.496 \times 10^8\) km. 3. Height: \(1.496 \times 10^8 \times 5.82 \times 10^{-4} \approx 8.70 \times 10^4\) km. 4. Compare: Earth's diameter is about 12,700 km, so the prominence is about 6.8 Earths tall. 5. Check: the whole Sun spans about 32 arcminutes and \(1.39 \times 10^6\) km, and 2/32 of that is about 87,000 km, the same answer.
Solar flares
A solar flare is a sudden, intense brightening of a small region of the Sun, usually above a complex sunspot group. A flare rises to its peak in minutes and may last from minutes to hours. Its gas is heated to around 10 million K or more, so it pours out X-rays and ultraviolet light, along with radio bursts and streams of fast particles. Only a small fraction of its energy appears as visible light. The largest flares release something like \(10^{25}\) J, more than humanity would use in 10,000 years at today's rate, in a few hours. Near solar maximum, small flares happen several times a day.
Magnetic reconnection
Where does a flare's energy come from? Twisting motions at the surface wind up the magnetic field above an active region, storing energy in it, much as winding a clock spring stores energy. When oppositely directed field lines are pushed together, they can suddenly break and reconnect in a simpler shape, releasing the stored energy as heat, light and accelerated particles. This process, magnetic reconnection, is the leading explanation for flares and many eruptions. A flare releases magnetic energy; it is not a nuclear explosion, and no fusion happens in it.
Classifying flares by X-rays
Satellites such as NOAA's GOES spacecraft measure the X-ray power arriving at Earth, and flares are graded by their peak value in W/m². The classes are A, B, C, M and X, each ten times stronger than the one before: a C1 flare peaks at \(10^{-6}\) W/m², an M1 at \(10^{-5}\) W/m² and an X1 at \(10^{-4}\) W/m². A number after the letter multiplies it, so an X3 is three times an X1. The scale is open-ended: an X9.0 flare in October 2024 was, as of 2026, among the strongest of Cycle 25, and a 2003 flare is estimated at about X45.
Worked example: comparing flares
Part A: how many times stronger in peak X-rays is an X2 flare than an M5 flare? 1. Convert: X2 means \(2 \times 10^{-4}\) W/m²; M5 means \(5 \times 10^{-5}\) W/m². 2. Divide: \(\frac{2 \times 10^{-4}}{5 \times 10^{-5}} = 4\). So the X2 is 4 times stronger, not 20 or 2. Part B: a huge flare releases \(1 \times 10^{25}\) J. For how long does the whole Sun, of luminosity L☉ \(\approx 3.83 \times 10^{26}\) W, emit that much? 3. Time = energy ÷ power: \(\frac{1 \times 10^{25}}{3.83 \times 10^{26}} \approx 0.026\) s. 4. Interpret: even the greatest flare equals about one fortieth of a second of ordinary sunshine. Flares matter because their energy is concentrated in X-rays and fast particles.
Coronal mass ejections
A coronal mass ejection (CME) is a vast bubble of coronal plasma and magnetic field blasted into space, typically carrying around a billion tonnes. CMEs leave the Sun at speeds from under 250 km/s to nearly 3000 km/s, and are watched with coronagraphs, which block the bright disc so the expanding cloud shows up against the faint corona. Many CMEs accompany flares or erupting prominences, but the two are different events: a flare is a flash of radiation, while a CME is a moving cloud of matter. CMEs aimed at Earth cause the strongest space weather.
Active regions tie it together
Sunspots, plages, prominences, flares and CMEs tend to occur in the same places, stacked at different heights above regions of strong, tangled magnetic field. Such a place is an active region. Seen at several wavelengths at once, an active region shows spots in the photosphere, plage in the chromosphere and bright loops of hot gas in the corona, all tracing the same magnetic field. Because active regions come and go with the sunspot cycle, flares and CMEs are far more frequent near solar maximum.
Common mistakes to avoid
First, treating flares and CMEs as the same thing: one is radiation released in minutes, the other an expanding cloud of matter. Second, reading flare classes linearly across letters: M5 to X2 is a factor of 4, because each letter is ten times the one before. Third, thinking a filament and a prominence are different objects: they are the same structure seen against the disc or against space. Fourth, calling flares nuclear explosions: their energy is magnetic.
Key takeaways
Filters tuned to hydrogen or calcium lines show the chromosphere; extreme ultraviolet and X-rays from space show the corona. Plages are bright, hot chromospheric regions around sunspots. Prominences are cool, dense plasma held up by magnetic fields, seen as dark filaments on the disc. Flares release stored magnetic energy through reconnection, heating gas to about 10 million K, and are classed A, B, C, M and X by peak X-ray flux, each class ten times the last. CMEs are huge clouds of plasma. All cluster in magnetic active regions and peak near solar maximum.
Flashcards
Flashcard
Red hydrogen line used to image the chromosphere
Test your understanding
Question 1 of 5
A dark ribbon is seen crossing the Sun's bright disc in hydrogen light. When the Sun's rotation carries it to the edge, it appears as a bright arch against space. What is it?
Question 2 of 5
How many times stronger in peak X-ray flux is an X2 flare than an M5 flare?
Question 3 of 5
What is the leading explanation for the energy released in a solar flare?
Question 4 of 5
A prominence at the Sun's edge appears 1.0 arcminute tall from Earth, 1.496 × 10⁸ km away. About how tall is it?
Question 5 of 5
Which statement correctly distinguishes a solar flare from a coronal mass ejection?
