Astronomy › Section F · Astronomical instruments › Topic F.1

Telescopes

A telescope is a bucket for light. Its job is to collect far more light than your eye can and bring it to a sharp focus, and the size of its main lens or mirror matters far more than how much it magnifies.

Three parts of an observing system

Every modern system for measuring light from space has three parts. First, a telescope collects the radiation, working as a bucket that catches far more than the eye can, just as a wide bin catches more rain than a coffee cup. Second, an instrument sorts the light by wavelength, either crudely with coloured filters or in fine detail with a spectrometer, as in Spectroscopy in astronomy. Third, a detector senses the light and makes a permanent record. The history of astronomical instruments is largely the story of improving each of these three parts.

From the naked eye to Galileo

For thousands of years the eye was the only light collector. Cultures around the world built sites aligned with the sky to track the Sun, Moon and stars for calendars and ceremonies, and observers recorded what they saw by writing or drawing. In 1608 three spectacle makers in the Netherlands, including Hans Lippershey, came forward with a tube holding two lenses that made distant objects look nearer. Galileo Galilei built his own versions, turned them on the sky from late 1609 and published his discoveries in 1610: craters on the Moon, four moons circling Jupiter and countless stars invisible to the eye.

Collecting light: aperture is everything

Most astronomical objects are extremely faint, so a telescope's most important job is to collect light. Its light-gathering power depends on the area of its main lens or mirror, and the diameter of that opening is called its aperture, \(D\). The area of a circle is \(\frac{\pi D^2}{4}\), so light-gathering power grows as the square of the aperture:

\frac{\text{light from A}}{\text{light from B}} = \left(\frac{D_A}{D_B}\right)^2

Double the aperture and you collect four times the light; make it ten times wider and you collect a hundred times as much. More light means fainter objects can be seen and measured.

Worked example: a mirror against an eye

Compare a telescope with a 4.0 m mirror to a dark-adapted human eye, whose pupil opens to about 7 mm. 1. Write both apertures in the same unit: 4.0 m and 0.007 m. 2. Ratio of diameters: \(\frac{4.0}{0.007} = 571\). 3. Square it: \(571^2 \approx 3.3 \times 10^5\). 4. Check using the areas: the mirror's area is \(\frac{\pi (4.0)^2}{4} = 12.6\ \mathrm{m^2}\) and the pupil's is \(3.8 \times 10^{-5}\ \mathrm{m^2}\), and dividing gives the same 330,000. So in one moment the telescope gathers about 330,000 times as much light as your eye, and a long exposure on a detector adds even more.

How a lens forms an image

A lens is a piece of transparent material shaped so that it bends, or refracts, light passing through it. A convex lens brings parallel rays together at a point called the focus, where an image forms. The distance from the lens to the focus is its focal length. Light from a star reaches us in effectively parallel rays, because the star is so far away that the few rays heading for our small telescope are almost exactly aligned. A second, smaller lens called the eyepiece then magnifies the image for the eye, or a detector is placed at the focus instead.

Worked example: magnification

A telescope's magnification is the focal length of its main lens or mirror divided by the focal length of the eyepiece:

M = \frac{f_{\text{telescope}}}{f_{\text{eyepiece}}}

A small telescope has a focal length of 1200 mm. 1. With a 25 mm eyepiece: \(M = \frac{1200}{25} = 48\) times. 2. With a 10 mm eyepiece: \(M = \frac{1200}{10} = 120\) times. 3. Interpret: magnification is changed simply by swapping eyepieces, so it says little about the telescope itself. 4. Check: too much magnification also magnifies the shimmer of the air, so the image grows bigger but no sharper, and dimmer because the same light is spread more thinly.

Refracting telescopes

A telescope that uses a lens as its main light collector is a refractor; Galileo's were refractors, as are binoculars. Large refractors face hard limits. Light must pass right through the lens, so the glass must be flawless and free of bubbles throughout, and both surfaces must be shaped precisely. Glass bends different colours by different amounts, so each colour focuses at a slightly different place, blurring the image with coloured fringes: chromatic aberration. A lens can be held only by its edges, so a big one sags under its own weight. The 1-metre refractor at Yerkes Observatory in Wisconsin, completed in 1897, remains the largest ever used for research.

Reflecting telescopes

A reflector uses a concave mirror, curved like the inside of a bowl and coated with a thin, shiny layer of aluminium or silver, to bring parallel light to a focus. Isaac Newton built the first successful reflector in 1668. Mirrors avoid the refractor's problems. Light bounces off the front surface only, so flaws inside the glass do not matter and only one surface needs precise shaping. A mirror reflects all colours to the same point, so there is no chromatic aberration. It can also be supported across its whole back. For these reasons almost every large research telescope, and most amateur ones, is a reflector.

Where the light is focused

The main, or primary, mirror sits at the bottom of the tube and reflects light back up to the prime focus near the top, where a camera can sit in large telescopes. A small secondary mirror can instead redirect the light. In a Newtonian design, a flat mirror sends it out of the side of the tube to an eyepiece. In a Cassegrain design, used by most large professional telescopes, a curved secondary mirror sends the light back down through a hole in the primary mirror to instruments mounted behind it. The secondary blocks only a small fraction of the incoming light.

Common mistakes to avoid

First, judging a telescope by its magnification; aperture decides how much light it gathers and how faint it can see. Second, scaling light-gathering power with diameter rather than its square: a mirror twice as wide gathers four times the light. Third, mixing units when comparing apertures, such as metres with millimetres. Fourth, assuming mirrors suffer from chromatic aberration as lenses do; a mirror reflects all colours to the same focus. Fifth, picturing astronomers peering through big telescopes; detectors record the light instead.

Key takeaways

An observing system has a telescope to collect light, an instrument to sort it by wavelength and a detector to record it. Telescopes were invented in the Netherlands in 1608, and Galileo turned them on the sky in 1609-1610. Light-gathering power is proportional to aperture squared. A lens or concave mirror focuses parallel starlight, and magnification M = f(telescope) ÷ f(eyepiece) is set by the eyepiece. Refractors suffer chromatic aberration, flawed glass and sagging; reflectors, first built by Newton in 1668, avoid these, so all large telescopes are reflectors.

Flashcards

Flashcard

Three parts of an observing system

Telescope to collect, instrument to sort by wavelength, detector to record

True at every wavelength.

Test your understanding

Question 1 of 5

How much more light does a 5-metre telescope collect than a 0.5-metre telescope?

Question 2 of 5

A telescope with a focal length of 2000 mm is used with a 20 mm eyepiece. What is the magnification?

Question 3 of 5

Which is a problem for large refracting telescopes but not for reflecting telescopes?

Question 4 of 5

A buyer must choose between two telescopes. Which feature matters most for seeing faint galaxies?

Question 5 of 5

In a Cassegrain reflecting telescope, where is the light brought to a focus?

← Previous topicNext topic →