Biology › Section G · Chromosomes and DNA › Topic G.6

DNA repair and mutation

Every time a cell copies its roughly six billion bases, a few slip through wrong — and every day, sunlight and chemistry batter the copies that already exist. Life survives because three repair systems patrol the DNA: proofreading during replication, mismatch repair after it, and nucleotide excision for bulky damage. When the patrols fail — or when the repair genes themselves are broken — the result is mutation, sometimes cancer, and occasionally a disease like xeroderma pigmentosum, where sunlight itself becomes dangerous.

The stakes of copying

DNA replication is astonishingly accurate, but DNA polymerase occasionally inserts the wrong base, and DNA is under constant assault from radiation and chemicals. Uncorrected mistakes can carry serious consequences — cancer among them — so cells deploy layered repair mechanisms. Most replication errors are fixed on the spot; some are corrected after replication finishes; a rare few escape entirely and become permanent changes in the nucleotide sequence — mutations. And in some unlucky cases, the repair enzymes themselves are mutated or defective, leaving every copy more error-prone than the last.

Proofreading: the first line of defence

Most replication mistakes are corrected immediately by DNA polymerase itself, in a built-in quality check. Before attaching the next nucleotide, the enzyme reads the base it just added and tests whether it pairs correctly with the template strand. A correct pairing gets the next nucleotide; a mismatch triggers a cut at the phosphodiester bond, and the wrong nucleotide is released — the exonuclease action of DNA pol III — then replaced with a fresh attempt. The polymerase, in effect, never writes two letters ahead without re-reading the first.

Mismatch repair: the second pass

Some errors survive proofreading and are fixed only after replication ends, by mismatch repair enzymes that find the mispaired nucleotide, excise it, and substitute the right base. The hard problem is telling which strand is wrong — the base or its partner could be the culprit. Escherichia coli solves it with methylation: shortly after replication, adenines in the DNA acquire methyl groups, so the parental strand is methylated while the freshly made strand is not. Repair enzymes therefore remove the offending base from the new, unmethylated strand, trusting the old one. Eukaryotes use a less-understood scheme, believed to rely on spotting unsealed nicks in the new strand and on replication proteins lingering near the daughter strand for a short while after completion.

Nucleotide excision repair: for bulky damage

The third system handles damage too distorted for a single-base swap. In nucleotide excision repair, enzymes cut the DNA on both sides of the lesion — one incision on the 3' side, one on the 5' side — and remove the whole damaged segment. DNA polymerase fills the gap with correctly paired nucleotides, and DNA ligase seals the final nick with a phosphodiester linkage. This is the mechanism most often called on when ultraviolet light welds two neighbouring thymine bases into a distorting thymine dimer.

Worked example: a day at the beach, traced at the molecular level

Follow ultraviolet damage through the system. (1) UV photons strike skin-cell DNA and fuse adjacent thymines into a thymine dimer, which kinks the double helix and threatens to stall the next replication. (2) Nucleotide excision repair detects the distortion, cuts on both sides of the dimer, and lifts the damaged stretch out. (3) DNA polymerase rebuilds the gap from the intact complementary strand; ligase seals the seam. (4) Now the failure case: in xeroderma pigmentosum, those excision enzymes are defective, so the dimers stay. (5) Unrepaired dimers distort the helix, derail replication, and accumulate into the skin lesions of the disease — sunlight becomes genuinely dangerous. (6) The same logic explains malignant melanoma from excessive UV exposure: DNA left unrepaired too often eventually escapes as mutation.

Mutations: induced and spontaneous

Replication errors are not the only source of mutations — variations in a genome's nucleotide sequence. Induced mutations follow exposure to an external agent: chemicals, ultraviolet rays, x-rays, or other environmental attackers. Spontaneous mutations arise with no exposure at all, from natural chemical reactions happening inside the body every day — bases subtly misbehaving on their own. The distinction matters for public health: induced mutation rates can be reduced (sunscreen, avoiding carcinogens), while spontaneous ones set the baseline that repair systems exist to absorb.

The mutation catalogue

Mutations range in size and effect. Silent mutations change the sequence but are never expressed — no effect on the organism. Point mutations touch a single base pair, most commonly by substitution: one base swapped for another. Substitutions come in two flavours. A transition replaces a base with one of the same shape — purine for purine (adenine for guanine, say) or pyrimidine for pyrimidine. A transversion crosses the lines — a purine replaced by a pyrimidine or the reverse. Bigger edits include insertion (a base added), deletion (a base lost), and translocation, where a stretch of DNA relocates to a different chromosome or a different region of the same one.

Worked example: classifying four mutations

Sort each error into its category. (1) An adenine is replaced by guanine: purine swapped for purine — a transition substitution. (2) A cytosine is replaced by adenine: pyrimidine swapped out for purine — a transversion substitution. (3) A single nucleotide is inserted mid-gene: every codon downstream of it is scrambled — a frameshift mutation. (4) Three nucleotides are inserted at once: the reading frame survives (three is one full codon's width), so only one amino acid is added — which is why triple insertions are often less damaging than single ones. (5) The sorting rule: one base changed — substitution (same-shape = transition, cross-shape = transversion); bases added or removed — insertion or deletion; chunks moved between chromosomes — translocation; and always check the frame first when predicting severity.

When the repairers need repair

The repair systems are themselves encoded by genes — and those genes can break. Mutated repair genes have been implicated in forms of pancreatic, colon, and colorectal cancer: each failed repair widens the door for more mutations to accumulate. Location decides the legacy. Mutations that pile up in a somatic cell stay in that cell's lineage and can drive the uncontrolled division of cancer — but die with the organism. A mutation in a germ cell, however, is handed to the next generation, which is how disorders like haemophilia and xeroderma pigmentosum persist: the repair defect itself is inherited, making every cell's DNA unusually vulnerable.

Common mistakes to avoid

First, confusing the three repair systems: proofreading happens during replication by the polymerase itself; mismatch repair comes after replication and uses strand-marking to pick the culprit; nucleotide excision cuts out whole segments around bulky lesions. Second, assuming repair enzymes always know which strand is wrong — in E. coli they follow methylation, old strand versus new. Third, calling every substitution a transversion — a purine-for-purine swap is a transition. Fourth, assuming any insertion is equally bad — a three-base insertion keeps the reading frame, a one-base insertion destroys it for the whole downstream gene. Fifth, forgetting that mutations in germ cells, not somatic cells, are what get inherited. Sixth, treating every mutation as harmful — many are silent, and a few become the raw material of evolution.

Key takeaways

Three repair layers keep DNA honest: DNA polymerase proofreads each base as it is added (exonuclease cut, replace, continue); mismatch repair sweeps after replication, using E. coli's methylation marks — old strand decorated, new strand bare — to excise errors from the fresh strand; and nucleotide excision repair cuts around bulky distortions like UV-induced thymine dimers, refills the gap with polymerase, and seals it with ligase. Defective excision repair produces xeroderma pigmentosum, where skin cannot survive sunlight undamaged. Mutations — sequence variations — arise induced (chemicals, UV, x-rays) or spontaneous (internal chemistry), as silent changes, point mutations (transitions within a base class, transversions across it), insertions, deletions, or translocations; frameshifts from single-base indels usually bite hardest. And when repair genes themselves mutate, cancers of the pancreas, colon, and colorectum follow — with somatic mutations confined to the individual but germ-line mutations, like those behind haemophilia, passed to every generation.

Flashcards

Flashcard

Proofreading

Polymerase checks each new base mid-copy

Bad base cut out by exonuclease action, replaced.

Test your understanding

Question 1 of 5

How does DNA polymerase proofread during replication?

Question 2 of 5

In E. coli, how does mismatch repair distinguish the new strand from the parental strand?

Question 3 of 5

A patient's skin develops lesions after minimal sun exposure, and testing shows thymine dimers are not being removed. Which repair system is defective?

Question 4 of 5

Adenine is substituted by guanine in a gene. This mutation is a:

Question 5 of 5

Why is the insertion of three nucleotides into a gene often less damaging than the insertion of one?

← Previous topicNext topic →