Biology › Section N · Nervous and sensory systems › Topic N.2

How neurons communicate

Inside a neuron the message is electrical - a self-regenerating voltage spike. Between neurons it is chemical - a molecule handed across a gap and weighed against all the other advice.

Two languages: electricity and chemistry

Everything a nervous system does - reflex to memory to decision - requires neurons to talk. Within a single neuron, the signal travels electrically as an action potential moving from dendrite to axon terminal. Between neurons, the signal usually crosses a junction called a synapse chemically, carried by neurotransmitter molecules. And a neuron weighs messages from many others before passing one on.

The charged membrane at rest

A resting neuron is a battery. Its lipid bilayer is impermeable to ions, so ions cross only through protein channels - including voltage-gated ion channels that respond to membrane voltage. The cell keeps potassium high inside and sodium high outside; because the membrane carries far more potassium leakage channels than sodium ones, potassium diffuses out faster than sodium leaks in, leaving the interior about 70 millivolts more negative than the outside - the resting membrane potential of roughly -70 millivolts. The sodium-potassium pump maintains the gradient, spending one ATP to bring two potassium ions in while expelling three sodium ions.

Action potential: fire and reset

Signals within a neuron are carried by the action potential, a brief full reversal of the resting potential. Input from other neurons depolarises the membrane, and if it reaches the threshold potential of about -55 millivolts at the axon hillock, voltage-gated sodium channels open and sodium floods in - the membrane completely depolarises to about +40 millivolts. This is all-or-nothing: once threshold is reached, the neuron always fully depolarises. Then the reset begins. Sodium channels close and cannot reopen, starting the refractory period in which no new action potential can fire; voltage-gated potassium channels open and potassium leaves, repolarising the membrane - and overshooting into hyperpolarisation, more negative than rest. As those potassium channels close, the leakage channels and the sodium-potassium pump settle the membrane back to -70.

Myelin and saltatory conduction

Conduction speed depends on axon diameter and resistance to current leak. Myelin is the insulator that prevents leak: in myelinated axons the signal jumps between the nodes of Ranvier - roughly one-micrometre unmyelinated gaps loaded with voltage-gated sodium and potassium channels - where the incoming current regenerates the spike. This jumping is saltatory conduction, far faster than regenerating the action potential at every point along the membrane, and cheaper too, since channels are needed only at the nodes. Demyelinating diseases like multiple sclerosis break the design: current leaks from previously insulated stretches, and conduction slows dramatically.

The chemical synapse

When an action potential reaches the axon terminal, it depolarises the presynaptic membrane and opens voltage-gated calcium channels. The calcium that enters triggers a signalling cascade that makes synaptic vesicles - membrane-bound packets of neurotransmitter - fuse with the membrane and release their contents into the synaptic cleft. The neurotransmitter diffuses across and binds receptors on the postsynaptic membrane, opening ligand-gated ion channels there. The effect can go either way: at the neuromuscular junction, acetylcholine opens postsynaptic sodium channels, depolarising the membrane in an excitatory postsynaptic potential that makes the postsynaptic cell more likely to fire. At inhibitory synapses, GABA opens chloride channels, hyperpolarising the membrane in an inhibitory postsynaptic potential that makes firing less likely.

Clearing the cleft

A synapse can only carry a second message once the first neurotransmitter is cleared from the cleft. Three mechanisms do it: diffusion away from the cleft, degradation by enzymes, and reuptake - recycling by the presynaptic neuron. Drugs aim at this step. Some Alzheimer's medications inhibit acetylcholinesterase, the enzyme that degrades acetylcholine; with the enzyme blocked, acetylcholine lingers in the cleft and keeps binding postsynaptic receptors, effectively boosting neurotransmission at those synapses.

Electrical synapses and summation

Chemical synapses dominate, but electrical synapses also matter: there the two membranes are physically joined by gap junctions, and current passes directly from cell to cell - virtually instantaneous, sometimes bidirectional, hard to block, and useful for synchronising neurons, as in thalamic synapses thought to regulate slow-wave sleep. Back at chemical synapses, one EPSP is often too weak to trigger firing alone, so multiple inputs must add up - summation, tallied at the axon hillock. A neuron typically fields both excitatory and inhibitory inputs at once, so IPSPs cancel EPSPs and vice versa; only the net depolarisation matters. Summation plus threshold is a built-in filter that keeps random noise from being transmitted as information.

Plasticity: LTP and LTD

Synapses are not fixed hardware - they strengthen, weaken, break, and reform, and that synaptic plasticity is the basis of learning and memory. In the hippocampus, long-term potentiation persistently strengthens a synapse on the principle that cells that fire together wire together. One known mechanism: repeated rapid excitation depolarises the postsynaptic cell, expelling the magnesium ions that normally block NMDA receptors and letting calcium in; the calcium cascade inserts more AMPA receptors into the postsynaptic membrane, so the next glutamate release produces a bigger excitatory effect. Long-term depression is the mirror image - low-frequency activity drives a different calcium cascade that removes AMPA receptors, weakening the synapse. Pruning unused connections is not waste: it makes the potentiated ones stand out.

Worked example: blocking the potassium channels

A drug blocks voltage-gated potassium channels; some heart-rhythm medicines act partly this way. Predict its effect by walking the stages. 1) Depolarisation is untouched: sodium channels still open at threshold, and the spike still peaks near +40 millivolts. 2) Repolarisation depends on potassium leaving through the blocked channels, so it is slowed. 3) The membrane stays depolarised longer, and the action potential is prolonged. 4) Check: the refractory period stretches too, so the next spike comes later - in heart muscle, that can calm runaway rhythms.

Worked example: three inputs and a decision

A postsynaptic neuron receives three near-simultaneous inputs: a strong EPSP, a weak EPSP, and an IPSP. What happens? All three are graded local voltage changes summed at the axon hillock. The strong EPSP pushes the membrane toward threshold; the weak EPSP adds to it; the IPSP subtracts by hyperpolarising. If the combined net depolarisation reaches about -55 millivolts, the neuron fires a full action potential - and fires it completely, because threshold is all-or-nothing. If it falls short, nothing is transmitted, and the inputs decay. The decision is simple arithmetic: add the excitations, subtract the inhibitions, compare the total to threshold.

Common mistakes to avoid

First, thinking a stronger stimulus makes a bigger action potential - the spike is all-or-nothing; strength is coded in firing rate, not amplitude. Second, confusing the refractory period with rest - during refractory, sodium channels cannot open at all, whereas a resting neuron is ready to fire. Third, saying repolarisation is done by the sodium-potassium pump - the immediate repolarisation is potassium flowing out through voltage-gated channels; the pump maintains gradients over the long run. Fourth, swapping calcium and sodium roles at the terminal - calcium triggers vesicle fusion; sodium carries the spike. Fifth, assuming synapses are one-way because most are - electrical synapses can be bidirectional. Sixth, treating LTP as the only plasticity - LTD weakens and prunes, and learning needs both.

Key takeaways

Neurons signal electrically within a cell and chemically between cells. Resting potential of about -70 millivolts comes from ion gradients maintained by the sodium-potassium pump. An action potential is an all-or-nothing event: threshold at -55, sodium-driven depolarisation to +40, then a potassium-driven reset that overshoots into hyperpolarisation during the refractory period. Myelin speeds conduction by making the spike jump the nodes of Ranvier - saltatory conduction - and demyelination slows it. At chemical synapses, calcium entry releases neurotransmitter vesicles into the cleft, producing EPSPs or IPSPs that are summed at the axon hillock against threshold; electrical synapses pass current instantly through gap junctions. Synaptic plasticity - LTP adding AMPA receptors, LTD removing them - is how synapses learn.

Flashcards

Flashcard

membrane potential

The difference in total charge between the inside and outside of a cell.

It is the neuron's working voltage - about -70 millivolts at rest, reversed to +40 during an action potential.

Test your understanding

Question 1 of 5

Which transport process directly maintains the resting membrane potential over time?

Question 2 of 5

A depolarising stimulus reaches the axon hillock but stops just short of the threshold potential. What happens?

Question 3 of 5

What is saltatory conduction?

Question 4 of 5

An action potential arrives at an axon terminal. What does the incoming calcium do?

Question 5 of 5

In long-term potentiation, what makes a synapse stronger after repeated stimulation?

← Previous topicNext topic →