Biology › Section R · The biosphere, populations, and communities › Topic R.4

Population demography

Before you can protect a population, harvest it sustainably or predict its future, you have to know how many individuals there are, how they are spread out and how long they tend to live. Demography supplies the counting tools and the tables that turn field data into those answers.

Counting the uncountable

Ecologists describe a population first by its size, N (how many individuals it contains), and its population density (how many live in each unit of area or volume), such as 12 deer per square kilometre or 40 water fleas per litre. Density matters: in a sparse population, finding a mate can be hard, while in a dense one, competition and disease spread more easily. Counting every individual is rarely possible, so ecologists sample part of the habitat and scale up. A later topic uses these numbers to model how populations grow.

Sampling with quadrats

For plants and slow movers such as snails, ecologists use quadrats: square frames, often 1 m by 1 m, placed at random points across the habitat. Every individual inside the frame is counted. Random placement avoids the bias of picking spots that look interesting. The quadrat size must suit the organism: a 1 m² frame works for daisies, but scattered trees need far larger plots. The mean count per quadrat, divided by the quadrat area, gives the density, and density multiplied by the total habitat area estimates N.

Worked example: wildflowers in a meadow

A student places ten 1 m² quadrats at random in a meadow of 5,000 m² and counts a wildflower in each: 3, 5, 0, 2, 4, 6, 1, 3, 2, 4. 1. Total count: 3 + 5 + 0 + 2 + 4 + 6 + 1 + 3 + 2 + 4 = 30 plants. 2. Area sampled: 10 × 1 m² = 10 m². 3. Density: 30 / 10 = 3.0 plants per m². 4. Population estimate: 3.0 × 5,000 = 15,000 plants. 5. Check: counts range from 0 to 6, so the plants are patchy; more quadrats would give a more reliable mean.

Mark and recapture

Mobile animals slip in and out of quadrats, so ecologists use mark and recapture. They catch a sample, mark each animal harmlessly (a tag, band or dab of paint) and release them. Once the marked animals have had time to mix back in, a second sample is caught and the marked ones counted. If M animals were marked, C are caught the second time and R of those are recaptures, then the marked fraction of the second catch, R/C, should match the marked fraction of the whole population, M/N. Rearranging gives

N = \frac{M \times C}{R}

Worked example: newts in a pond

Ecologists catch and mark 40 newts, then release them. A week later they catch 50 newts, of which 8 are marked. 1. Identify the values: M = 40, C = 50, R = 8. 2. Substitute: N = (40 × 50) / 8 = 2,000 / 8 = 250 newts. 3. Check with fractions: 8/50 = 0.16 of the second catch was marked, and 40 / 0.16 = 250. 4. Assumptions: no births, deaths or migration between samples; marks stay on and do not change behaviour or survival; every newt is equally catchable. 5. If marked newts learned to hide from nets, R would be too small and N would be overestimated; if they were drawn back to baited traps, N would be underestimated.

Patterns of dispersion

Two populations with the same density can be spread out very differently. In a clumped pattern, individuals gather in groups, because resources are patchy, seeds fall near the parent, or animals live in herds, flocks or schools. Clumping is the most common pattern in nature. In a uniform pattern, individuals are evenly spaced, usually because they compete or defend territories: nesting seabirds keep just out of pecking range, and desert creosote bushes end up evenly spaced as their roots compete for scarce water. In a random pattern, position is unpredictable, as when wind-scattered seeds germinate wherever they land in an even habitat.

Demography: births, deaths, arrivals and departures

Demography is the statistical study of populations and how they change over time. Four processes change N: births and immigration add individuals, while deaths and emigration remove them. If additions equal losses, N stays steady. Two features of a population help predict its births. Its age structure is the proportion of individuals in each age group: many young adults means many births to come. Its sex ratio is the ratio of males to females; in many species the number of females sets the limit on reproduction, so a female-biased ratio can raise the birth rate.

Life tables

A life table follows a group of individuals born at the same time, a cohort, through successive age intervals. For each interval it lists how many are alive at the start and how many die during it. From those, it calculates the mortality rate, often expressed per 1,000 alive at the start of the interval:

\text{mortality rate} = \frac{\text{number dying in the interval}}{\text{number alive at its start}} \times 1000

Many tables add life expectancy, the average further lifetime of individuals that reach each age.

Worked example: building a life table

A cohort of 1,000 lizards; number alive at the start of each year: age 0, 1,000; age 1, 400; age 2, 300; age 3, 240; age 4, 120; age 5, 0. 1. Deaths in each interval: 600, 100, 60, 120, 120. 2. Mortality per 1,000: 0 to 1, 600/1,000 × 1,000 = 600; 1 to 2, 100/400 × 1,000 = 250; 2 to 3, 60/300 × 1,000 = 200; 3 to 4, 120/240 × 1,000 = 500; 4 to 5, 120/120 × 1,000 = 1,000. 3. Check: the deaths add to 1,000, the whole cohort. 4. Fraction surviving to age 3: 240/1,000 = 24%. 5. Interpret: death is heaviest in the first year, eases in the middle years, then rises again with age.

Survivorship curves

A survivorship curve plots the number of a cohort still alive against age, usually with survivors on a logarithmic scale so that equal proportions dying appear as equal drops. Type I curves stay high and then fall steeply late in life: most individuals survive to old age, as in humans and many large mammals, which have few offspring and care for them. Type II curves are roughly straight lines, meaning a constant proportion dies at every age, as in many songbirds. Type III curves plunge early and then flatten: most offspring die young, but survivors live long, as in oysters, most fish and many trees, which produce huge numbers of young with little or no care.

Common mistakes to avoid

First, density is not size: 500 snails tells you N, while 5 snails per m² tells you density. Second, in mark and recapture, divide by the recaptured marked animals, R, not by the second catch, C. Third, clumped is the usual pattern; random dispersion is actually uncommon. Fourth, a mortality rate uses the number alive at the start of the interval, not the original cohort size. Fifth, a Type II curve means a constant proportion dying, which looks straight only on a logarithmic axis.

Key takeaways

Populations are described by size (N), density and dispersion. Quadrats estimate plants and slow movers: density = mean count per unit area, times habitat area for N. Mark and recapture estimates mobile animals with N = (M × C) / R, provided the population is closed and marking is harmless. Dispersion may be clumped (most common), uniform (competition, territories) or random. Age structure and sex ratio shape future births. Life tables give mortality per 1,000 alive, and survivorship curves of Types I, II and III summarise when in life deaths occur.

Flashcards

Flashcard

Population size

The total number of individuals in a population, written N

Estimated by sampling when a full count is impossible.

Test your understanding

Question 1 of 5

Researchers mark 60 fish and release them. Later they catch 45 fish, of which 9 are marked. What is the estimated population size?

Question 2 of 5

Desert creosote bushes end up almost evenly spaced because each bush's roots compete for the water in the soil around it. What dispersion pattern is this?

Question 3 of 5

An oyster releases millions of eggs. Almost all the larvae die within weeks, but those that settle on rock may live for years. Which survivorship curve fits?

Question 4 of 5

Of 500 voles alive at the start of an age interval, 125 die during it. What is the mortality rate per 1,000 for that interval?

Question 5 of 5

In a mark-recapture study, marked birds learn to avoid the traps. How does this affect the estimate of N?

← Previous topicNext topic →