Calculus › Section O · Multiple integrals › Topic O.4
Centre of mass and moments of inertia
Where should you put your finger to balance a flat plate of uneven thickness, and how hard is it to spin? Both answers are double integrals, and both come from one idea: distance weighted by mass.
Questions you can ask a flat plate
A lamina is a thin flat plate whose material is spread over a region of the plane. Engineering and physics ask three questions about one. How much does it weigh? That needs the mass. If you balance it on a fingertip, where is the balance point? That needs the centre of mass. If you spin it about an axis, how sluggish is it? That needs the moment of inertia. All three are double integrals of the density \(\rho(x, y)\), mass per unit area, weighted by different powers of distance. Distance to the power zero gives mass, to the power one locates the balance point, and to the power two measures the reluctance to spin.
Mass from density
If the density \(\rho(x, y)\) varies from point to point, the mass is the density summed against area:
A plate cut from a sheet of uniform density \(\rho_0\) needs no calculus: the integral is \(\rho_0\) times the area of \(R\). But hot-rolled metal, grown crystals and printed circuit boards can be denser in some places than others, and then every patch of area contributes according to its own density. The integral is set up exactly like the volume integrals of the previous topic; only the interpretation of the integrand has changed from height to mass per area.
Moments and the balance point
On a seesaw, a light child far from the pivot balances a heavy child near it: what matters is mass times distance. The same product drives a lamina. The moment about the x-axis is mass weighted by the y-distance, \(M_x = \iint_R y\,\rho(x, y)\,dA\), and the moment about the y-axis weights by the x-distance, \(M_y = \iint_R x\,\rho(x, y)\,dA\). (Watch the crossing: \(M_x\) is the one containing \(y\).) The centre of mass is where the moments balance:
Balancing the plate there zeroes out both first-moment totals, just as the seesaw rests level.
Worked example: a plate with varying density
A lamina occupies the unit square \(0 \le x \le 1\), \(0 \le y \le 1\) with density \(\rho(x, y) = 2x\): denser toward the right edge. Mass: \(m = \int_0^1\int_0^1 2x\,dy\,dx = \int_0^1 2x\,dx = 1\). Moment about the y-axis: \(M_y = \int_0^1\int_0^1 2x^2\,dy\,dx = \frac{2}{3}\). Moment about the x-axis: \(M_x = \int_0^1\int_0^1 2xy\,dy\,dx = \frac{1}{2}\). So \(\bar{x} = \frac{2/3}{1} = \frac{2}{3}\) and \(\bar{y} = \frac{1/2}{1} = \frac{1}{2}\). Both pass the sanity check: the centre drifts right of the square's midline \(x = \frac{1}{2}\) toward the dense side, and since the density ignores \(y\), the balance height stays at mid-height \(\frac{1}{2}\).
Centroids and the symmetry shortcut
When the density is constant, \(\rho\) cancels between numerator and denominator, and the centre of mass depends on the region's shape alone. That shape-only point is the centroid. A bonus comes with symmetry: if both the region and the density are symmetric about a line, the centroid lies on it, no integral required. A disk's centroid is its centre; a rectangle's is where its diagonals cross. Symmetry answers one coordinate and leaves one integral for the other, which is half the work. The word centroid belongs to uniform plates; a plate of uneven density still has a centre of mass, but it is not the centroid and generally not on any symmetry line.
Worked example: a centroid between parabolas
Find the centroid of the region between \(y = x^2\) and \(y = x\) (area \(\frac{1}{6}\), from the double-integral topic). For \(\bar{x}\): \(\iint_R x\,dA = \int_0^1 \int_{x^2}^{x} x\,dy\,dx = \int_0^1 (x^2 - x^3)\,dx = \frac{1}{12}\), so \(\bar{x} = \frac{1/12}{1/6} = \frac{1}{2}\). For \(\bar{y}\): \(\iint_R y\,dA = \int_0^1 \int_{x^2}^{x} y\,dy\,dx = \int_0^1 \frac{x^2 - x^4}{2}\,dx = \frac{1}{15}\), so \(\bar{y} = \frac{1/15}{1/6} = \frac{2}{5}\). The centroid is \((\frac{1}{2}, \frac{2}{5})\), sitting below the midline of the enclosing triangle, as the region itself does: the region hugs the lower parabola over most of its width.
Moments of inertia
Spin the lamina about an axis and Newton's law changes form: the relevant quantity is no longer mass but mass weighted by the square of the distance to the axis. The moment of inertia about the x-axis is
and about the y-axis, \(I_y = \iint_R x^2\,\rho\,dA\). Squaring the distance is what makes rotation different from sliding: a figure skater pulling in both arms spins faster precisely because her mass moves closer to the axis, cutting \(I\) and, with angular momentum \(I\omega\) conserved, raising \(\omega\). The kinetic energy of spinning at rate \(\omega\) is \(\frac{1}{2}I\omega^2\), exactly the shape of \(\frac{1}{2}mv^2\) with \(I\) in the mass's seat.
The polar moment and radius of gyration
Spinning the lamina in its own plane about the origin uses the squared distance \(x^2 + y^2\), and the result is the polar moment of inertia
The identity is worth remembering: it lets you skip one integral whenever two are known. Engineers often report \(I\) as a radius of gyration, \(k = \sqrt{I/m}\): the distance at which the entire mass could sit as a thin ring and spin with the same inertia. It converts an awkward squared-mass-distance number back into a length you can picture on the object.
Worked example: inertia of a uniform disk
A disk of radius 2 centimetres has uniform density \(\rho = 3\) grams per square centimetre. Mass: \(m = 3 \cdot \pi(2^2) = 12\pi\) grams. For the inertia, polar coordinates pay off immediately: \(y^2 = r^2\sin^2\theta\) and \(dA = r\,dr\,d\theta\), so
By symmetry \(I_y = 12\pi\) too, so \(I_0 = 24\pi\), matching a direct check: \(I_0 = 3\int_0^{2\pi}\int_0^2 r^2 \cdot r\,dr\,d\theta = 3 \cdot 2\pi \cdot 4 = 24\pi\). The radius of gyration is \(k = \sqrt{24\pi/12\pi} = \sqrt{2}\), and \(\sqrt{2} = 2/\sqrt{2}\) is the disk's characteristic \(a/\sqrt{2}\) at \(a = 2\).
Common mistakes to avoid
The classic mix-up is in the moments: \(M_x\) weights by \(y\) and \(M_y\) weights by \(x\), because the moment about an axis uses distance from that axis. Second, every moment and inertia of a non-uniform plate contains the density; dropping \(\rho\) computes the uniform-density answer for a different plate. Third, \(I_x\) uses \(y^2\), not \(y\): inertia is a squared-distance weighting, and mixing it up with the first moment gives balance answers to spin questions. Fourth, the centre of mass formula divides by the mass; forgetting the division reports a moment with balance-point units. Finally, the centroid is the uniform-density centre of mass; calling \(\frac{M_y}{m}\) a centroid of an uneven plate confuses two different points.
Key takeaways
A lamina's mass is \(m = \iint \rho\,dA\), its balance point is \(\bar{x} = M_y/m\), \(\bar{y} = M_x/m\) with \(M_x = \iint y\rho\,dA\) and \(M_y = \iint x\rho\,dA\), and its spin-resistance about those axes is \(I_x = \iint y^2\rho\,dA\) and \(I_y = \iint x^2\rho\,dA\). The polar moment is \(I_0 = I_x + I_y\), and the radius of gyration \(k = \sqrt{I/m}\) restates inertia as a length. Uniform plates have centroids, fixed by shape and symmetry; uneven plates need the density every step of the way.
Flashcards
Flashcard
A thin flat plate with density ρ(x, y), mass per unit area
Test your understanding
Question 1 of 5
A lamina covers the unit square 0 ≤ x ≤ 1, 0 ≤ y ≤ 1 with density ρ(x, y) = 3x. What is its mass?
Question 2 of 5
For that same lamina (density 3x on the unit square), where is the centre of mass?
Question 3 of 5
Which integral gives the moment about the x-axis of a lamina with density ρ(x, y)?
Question 4 of 5
A triangular lamina with vertices (0, 0), (2, 0), (0, 2) has uniform density. Where is its centroid?
Question 5 of 5
A lamina with uniform density 1 covers the unit square. What is its moment of inertia about the x-axis?
Standards: Beyond AP
