Calculus › Section L · Vectors and the geometry of space › Topic L.1
Vectors in the plane
Speed says how fast; velocity says how fast and which way. To handle direction as well as size, mathematics uses vectors, and once they are written in components they behave like ordinary algebra.
Quantities that point
Some measurements are fully described by a number: temperature, mass, area. Mathematicians call these scalars. Others are incomplete without a direction: a boat moving at 10 knots north-east is very different from a boat moving at 10 knots south-west, and a push to the right does something a push to the left does not. These are vector quantities, and they include velocity, force, acceleration and displacement. A vector is represented geometrically as a directed line segment: an arrow with an initial point (the tail) and a terminal point (the head). In print a vector is named with a boldface letter or a letter with an arrow over it; in this course we mostly work with a third description that turns geometry into arithmetic.
Component form
A vector from the initial point \(P(p_1, p_2)\) to the terminal point \(Q(q_1, q_2)\) is determined by how far it moves across and how far it moves up. Subtract tail from head to get the component form:
For example, \(\overrightarrow{PQ}\) from \(P(2, -1)\) to \(Q(5, 3)\) is \(\langle 3, 4\rangle\). Two vectors are equal when their components are equal, which means the arrows are parallel, the same length and pointing the same way; the actual position of the arrow on the page does not matter. That freedom is what makes vectors useful: any vector can be slid so its tail sits at the origin without changing it.
Magnitude and direction
The length of a vector \(\mathbf{v} = \langle v_1, v_2\rangle\) is its magnitude or norm, written \(\|\mathbf{v}\|\) and computed with the distance formula:
For \(\langle 3, 4\rangle\) the magnitude is 5, a scaled 3-4-5 triangle. A vector's direction can also be reported as the angle \(\theta\) it makes with the positive x-axis, where \(\tan\theta = \frac{v_2}{v_1}\) with the quadrant chosen to match the signs of the components. The vector \(\langle 1, \sqrt{3}\rangle\) has magnitude 2 and direction \(60°\), because \(\tan 60° = \sqrt{3}\) and both components are positive. Going the other way, a vector with magnitude \(\|\mathbf{v}\|\) and direction angle \(\theta\) has components \(\langle \|\mathbf{v}\|\cos\theta,\ \|\mathbf{v}\|\sin\theta\rangle\): here \(\langle 2\cos 60°, 2\sin 60°\rangle = \langle 1, \sqrt{3}\rangle\).
Adding vectors and scaling them
Vectors add component by component: \(\langle u_1, u_2\rangle + \langle v_1, v_2\rangle = \langle u_1 + v_1,\ u_2 + v_2\rangle\). Geometrically, adding means placing the tail of the second arrow at the head of the first and drawing the arrow from the first tail to the final head, the tip-to-tail rule; equivalently, the sum is the diagonal of the parallelogram the two arrows span. Multiplying by a scalar \(c\) rescales every component: \(c\langle v_1, v_2\rangle = \langle cv_1, cv_2\rangle\). If \(c > 1\) the arrow stretches; if \(0 < c < 1\) it shrinks; if \(c < 0\) it also reverses direction. Vector addition satisfies the familiar algebra rules, commutative and associative, and \(\mathbf{v} + (-1)\mathbf{v} = \mathbf{0}\), the zero vector \(\langle 0, 0\rangle\).
Worked example: a resultant force
Two tugboats pull a barge; take the x-axis as east and the y-axis as north. One exerts a force of 400 newtons along \(\langle 4, 3\rangle\) (magnitude 5 units), the other 500 newtons along \(\langle -3, 4\rangle\) (magnitude 5 units). Scaling to actual force, the first tugboat pulls with \(400 \cdot \frac{\langle 4, 3\rangle}{5} = \langle 320, 240\rangle\) newtons, the second with \(500 \cdot \frac{\langle -3, 4\rangle}{5} = \langle -300, 400\rangle\) newtons. The resultant force is the sum: \(\langle 20, 640\rangle\) newtons. Its magnitude is \(\sqrt{400 + 409{,}600} = \sqrt{410{,}000} \approx 640\) newtons, almost straight northward, and its exact direction angle satisfies \(\tan\theta = \frac{640}{20} = 32\), so \(\theta \approx 88°\). The barge drifts slowly east while moving strongly north.
Unit vectors and the i, j notation
A unit vector has magnitude 1. Any nonzero vector \(\mathbf{v}\) can be turned into a unit vector pointing the same way by dividing by its length: \(\mathbf{u} = \frac{\mathbf{v}}{\|\mathbf{v}\|}\). Two unit vectors are so handy they get permanent names: \(\mathbf{i} = \langle 1, 0\rangle\), pointing along the x-axis, and \(\mathbf{j} = \langle 0, 1\rangle\), pointing along the y-axis. Every plane vector is a combination of them:
So \(\langle 3, 4\rangle = 3\mathbf{i} + 4\mathbf{j}\). Splitting a vector into \(v_1\mathbf{i} + v_2\mathbf{j}\) is called resolving it into components, and it is exactly what the tugboat calculation did informally: a horizontal part and a vertical part that can be handled separately.
Worked example: a unit vector
Find a unit vector in the direction of \(\mathbf{v} = \langle -5, 12\rangle\), then a vector of length 26 in the same direction. The magnitude is \(\|\langle -5, 12\rangle\| = \sqrt{25 + 144} = 13\), so the unit vector is
Check: \(\left(\frac{5}{13}\right)^2 + \left(\frac{12}{13}\right)^2 = \frac{25 + 144}{169} = 1\), so the length is 1 as promised. Scaling up, a vector of length 26 in the same direction is \(26\mathbf{u} = \langle -10, 24\rangle\), whose magnitude is \(\sqrt{100 + 576} = 26\). Note that \(26 = 2 \times 13\), so the answer is simply twice the original vector; normalising and then re-scaling always reproduces the original direction with any length you like.
Where plane vectors earn their keep
Navigation states velocity as a vector, and wind or current adds as a further vector. A plane flying at 240 km/h due east in a wind blowing 70 km/h due south has velocity \(\langle 240, 0\rangle + \langle 0, -70\rangle = \langle 240, -70\rangle\): ground speed \(\sqrt{57{,}600 + 4{,}900} = \sqrt{62{,}500} = 250\) km/h, a little off course but faster than still air would suggest. The same addition handles ropes in tug-of-war, cables holding up a sign, and the combined pull of gravity and drag. In every case the recipe is identical: resolve each influence into components, add, and recombine.
Common mistakes to avoid
The most frequent error is subtracting the components in the wrong order: the vector from \(P\) to \(Q\) is terminal minus initial, \(\langle q_1 - p_1, q_2 - p_2\rangle\); swapping gives the opposite direction. The second is treating magnitude as the vector: the answer to "find the force" is a pair of components, not just its length. The third is forgetting that scalar multiplication by a negative number reverses direction, so \(-\mathbf{v}\) is not a slightly different \(\mathbf{v}\) but the same arrow flipped.
Key takeaways
A vector carries magnitude and direction; from \(P(p_1, p_2)\) to \(Q(q_1, q_2)\) it is \(\langle q_1 - p_1, q_2 - p_2\rangle\), with magnitude \(\sqrt{v_1^2 + v_2^2}\) and direction angle from \(\tan\theta = \frac{v_2}{v_1}\). Vectors add and rescale component by component, matching tip-to-tail and parallelogram pictures. Dividing by the magnitude gives a unit vector, and \(\mathbf{i} = \langle 1, 0\rangle\), \(\mathbf{j} = \langle 0, 1\rangle\) resolve any vector into \(v_1\mathbf{i} + v_2\mathbf{j}\). Forces, velocities and currents combine by resolving, adding and recombining.
Flashcards
Flashcard
A quantity with size only
Test your understanding
Question 1 of 5
What is the component form of the vector from P(2, −1) to Q(5, 3)?
Question 2 of 5
What is the magnitude of ⟨−8, 15⟩?
Question 3 of 5
What is ⟨3, 4⟩ + ⟨−1, 2⟩?
Question 4 of 5
Which is a unit vector in the direction of ⟨−5, 12⟩?
Question 5 of 5
A vector has direction angle 60° and magnitude 2. What are its components?
Standards: 9 (BC)
