Chemistry › Section K · Solutions and colloids › Topic K.5
Colloids
Milk, fog, paint, jelly and whipped cream look smooth and uniform, yet none of them is a true solution. They are colloids, mixtures whose particles are too small to settle but large enough to scatter light, and their special behaviour is at work in cooking, cleaning, medicine and water treatment.
Between a solution and a suspension
Shake fine mud into water and it soon settles; stir in salt and it dissolves for good. Milk is neither. It never settles, yet it is white and opaque rather than clear. Mixtures like milk are colloids, or colloidal dispersions, and they sit between solutions and suspensions. Their particles are much larger than ordinary molecules or ions but still too small to see. Some are clusters of many molecules, such as fat droplets in milk; others are single giant molecules, such as proteins. Their behaviour is set mainly by their size.
Sizes and properties
Particle size separates the three kinds of mixture. In a solution, the dissolved particles are smaller than about 1 nm; it is transparent, never settles, and passes through any filter. In a colloid, the particles are roughly 1 nm to 1000 nm (1 µm) across; they do not settle, pass through ordinary filter paper, and often make the mixture look cloudy. In a suspension, the particles are larger than about 1 µm; the mixture is cloudy, the particles settle on standing, and filter paper traps them. Colloidal particles stay suspended partly because collisions with the fast-moving solvent molecules keep knocking them about, a jittering called Brownian motion.
The Tyndall effect
Colloidal particles are large enough to scatter light, so a beam passing through a colloid becomes visible from the side. This is the Tyndall effect, named after the nineteenth-century Irish physicist John Tyndall. Shine a laser pointer through water with a few drops of milk and a bright line appears; through salt water or sugar water the beam is invisible inside the liquid, because dissolved particles are too small to scatter noticeably. The same effect makes headlight beams visible in fog, and it gives a quick test for telling a colloid from a solution.
Naming the parts and the types
A colloid has a dispersed phase, the particles, spread through a dispersion medium, the continuous substance around them, rather like solute and solvent. Almost any pair of states works. An aerosol is liquid or solid particles in a gas: fog, sprays and smoke. A sol is solid particles in a liquid, such as paint and ink. An emulsion is liquid droplets in a liquid, such as milk and mayonnaise. A foam is gas in a liquid, such as whipped cream, and a solid foam is gas in a solid, such as pumice or a marshmallow. A gel is a liquid trapped in a solid network, such as jelly. The only impossible pair is gas in gas, because gases always mix completely into a solution.
Worked example: classifying colloids
Name the dispersed phase, the dispersion medium and the type for whipped cream, fog and smoke. 1. Whipped cream: air bubbles are spread through a liquid cream, so the dispersed phase is a gas and the medium a liquid, making it a foam. 2. Fog: tiny water droplets hang in air, a liquid in a gas, so it is an aerosol. 3. Smoke: solid soot particles in air, a solid in a gas, so it is also an aerosol. 4. Check: in each case the medium is the continuous substance, and the dispersed phase is the one broken into separate bits.
Making colloids
There are two routes to particles of colloidal size. Dispersion methods break large pieces down, as in grinding pigments for paint or blending oil into droplets. Condensation methods build particles up from molecules or ions: clouds form as water molecules gather into tiny droplets, and many reactions make colloidal solids. Adding acid to sodium thiosulfate solution slowly forms a cloudy sulfur sol:
If particles keep growing past the colloidal range, they become a precipitate that settles, as when cloud droplets merge into raindrops.
Worked example: why surfaces matter
Colloidal particles have a vast total surface, which is why they adsorb ions so strongly. A 1.00 cm cube is ground into cubes 10.0 nm on a side. How does the total surface area change? 1. Original area: 6 faces of \(1.00\ \mathrm{cm^2}\), so \(6.00\ \mathrm{cm^2} = 6.00 \times 10^{-4}\ \mathrm{m^2}\). 2. Small cubes along each edge: \(\frac{1.00 \times 10^{-2}\ \mathrm{m}}{1.00 \times 10^{-8}\ \mathrm{m}} = 1.00 \times 10^6\), so \(10^{18}\) cubes in total. 3. Area of one: \(6 \times (1.00 \times 10^{-8})^2 = 6.00 \times 10^{-16}\ \mathrm{m^2}\). 4. Total: \(10^{18} \times 6.00 \times 10^{-16} = 600\ \mathrm{m^2}\). 5. Check: the area grows by the same factor as the edge shrinks, \(10^6\), and \(6.00 \times 10^{-4} \times 10^6 = 600\ \mathrm{m^2}\).
Emulsions, soaps and detergents
Shaken oil and water form an emulsion that soon separates as droplets merge. An emulsifying agent prevents this: lecithin from egg yolk stabilises mayonnaise, and proteins do so for milk fat. Soaps are emulsifiers too. Sodium stearate, \(\mathrm{C_{17}H_{35}COONa}\), has a long nonpolar hydrocarbon tail and an ionic head; such molecules, with a water-loving and a water-fearing part, are amphiphilic. In greasy water the tails dissolve in the grease and the heads face the water, wrapping grease into tiny balls called micelles that rinse away. In hard water, soap forms a scum:
Synthetic detergents avoid this because their calcium salts stay dissolved.
Keeping colloids apart, and breaking them
Many colloidal particles carry an electric charge, gained by adsorbing ions on their large surfaces. All the particles in one colloid carry the same sign, so they repel one another and stay dispersed. Destroying that charge lets them clump and settle, which is called coagulation. Water-treatment works add aluminium sulfate, whose highly charged ions neutralise suspended clay particles so they gather and sink; where a muddy river meets salty seawater, the same happens naturally and helps build deltas. Heating coagulates some colloids, as when egg white sets. Electrostatic precipitators in chimneys use charged plates to collect colloidal smoke particles.
Worked example: solution, colloid or suspension?
Three samples are tested. A is clear, shows no laser beam, and does not settle. B is slightly cloudy, shows a bright beam, passes through filter paper unchanged, and does not settle in a day. C is cloudy, settles within an hour, and leaves solid on filter paper. Classify each. 1. A scatters no light and never settles: a solution. 2. B scatters light, so its particles are at least about 1 nm, but it passes filter paper and stays mixed: a colloid. 3. C settles and is trapped by filter paper: a suspension. 4. Check: each sample matches every property in the size table, not just one.
Common mistakes to avoid
First, calling milk or fog a solution because it looks uniform; scattering of light and particle size show it is a colloid. Second, assuming colloidal particles settle like those of a suspension; they stay dispersed. Third, swapping the dispersed phase and the dispersion medium: the medium is the continuous part. Fourth, describing a foam as liquid droplets in a gas; that is an aerosol, while a foam is gas in a liquid. Fifth, expecting filter paper to remove a colloid; its particles pass through.
Key takeaways
Colloids have particles of roughly 1 nm to 1 µm, between solutions and suspensions, so they do not settle and pass filter paper but scatter light, the Tyndall effect. A colloid is a dispersed phase in a dispersion medium; types include aerosols, sols, emulsions, foams and gels. Colloids form by breaking particles down or building them up. Emulsifiers such as soaps, which are amphiphilic, stabilise emulsions and lift grease into micelles. Like charges keep colloidal particles apart; neutralising the charge or heating coagulates them.
Flashcards
Flashcard
A mixture with particles about 1 nm to 1 µm across that do not settle
Test your understanding
Question 1 of 5
A laser beam is shone through four liquids. In which one is the beam clearly visible inside the liquid?
Question 2 of 5
How is mayonnaise, oil droplets spread through vinegar and egg yolk, best classified?
Question 3 of 5
A mixture contains particles about 200 nm across. It does not settle, passes through filter paper and scatters light. What is it?
Question 4 of 5
How does soap help water wash away grease?
Question 5 of 5
A 1.00 cm cube (surface area 6.00 cm²) is ground into cubes 100 nm on a side. What is the new total surface area?
