Chemistry › Section F · Electronic structure and periodic properties › Topic F.4
Electron configurations
An electron configuration lists which orbitals an atom's electrons occupy. Three simple rules, applied in order, predict it for almost every element, and the result explains the shape of the periodic table and why elements in a group behave alike.
Orbital energies in many-electron atoms
In a hydrogen atom, every orbital with the same n has the same energy. Add more electrons and that changes, because electrons repel one another. Inner electrons partly shield outer ones from the nucleus, so an outer electron feels less than the full nuclear charge. An s electron spends some of its time very close to the nucleus, inside the inner electrons; it is said to penetrate, so it is shielded less and held more tightly. Penetration falls from s to p to d to f, so within one shell the subshell energies rise in the order s < p < d < f.
The aufbau order
The aufbau (German for "building up") principle says electrons fill the lowest-energy orbitals available first. Because of penetration, shells overlap: 4s lies lower than 3d and fills first. A reliable guide is the \(n + l\) rule: subshells fill in order of increasing \(n + l\), and where two tie, the one with the lower n fills first. For 4s, \(n + l = 4 + 0 = 4\); for 3d it is \(3 + 2 = 5\), so 4s comes first. The resulting order is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.
Pauli, Hund and orbital diagrams
A configuration is written as subshells with the number of electrons as a superscript: carbon, with six electrons, is \(1s^2 2s^2 2p^2\). The Pauli exclusion principle limits each orbital to two electrons of opposite spin, so subshells hold 2 (s), 6 (p), 10 (d) and 14 (f). An orbital diagram shows orbitals as boxes with arrows in them for electrons. Hund's rule says that in orbitals of equal energy, electrons go in singly, with parallel spins, before any pair up, because spreading out reduces their repulsion. Carbon's two 2p electrons therefore sit in separate boxes, both arrows up.
Worked example: sulfur
Write the configuration and orbital diagram of sulfur, Z = 16, and count its unpaired electrons. 1. Fill in aufbau order: 1s takes 2, 2s takes 2, 2p takes 6 and 3s takes 2, using 12 electrons. 2. The remaining 4 go into 3p: \(1s^2 2s^2 2p^6 3s^2 3p^4\). 3. Orbital diagram for 3p: Hund's rule puts one electron in each of the three boxes first, then the fourth pairs up: ↑↓ ↑ ↑. 4. So sulfur has 2 unpaired electrons, in two of the 3p orbitals. 5. Check: \(2 + 2 + 6 + 2 + 4 = 16\) electrons.
Noble-gas shorthand and valence electrons
Long configurations can be shortened by writing the previous noble gas in square brackets for the filled inner shells. Neon is \(1s^2 2s^2 2p^6\), so sulfur becomes \([\mathrm{Ne}]\,3s^2 3p^4\) and potassium, Z = 19, becomes \([\mathrm{Ar}]\,4s^1\). Electrons in the bracketed part are core electrons. The others, in the outermost shell for main-group elements, are valence electrons, and they do the chemistry. Sulfur has 6 valence electrons, and so do oxygen, \([\mathrm{He}]\,2s^2 2p^4\), and selenium, which is why the earlier topic found members of a group behaving alike.
The periodic table as a map
The table's shape follows the filling order. Groups 1 and 2 (plus helium) form the s block, two columns wide, where an s subshell is filling. Groups 13 to 18 form the p block, six columns wide. Groups 3 to 12 form the d block, ten wide, and the lanthanides and actinides form the f block, fourteen wide. The period number gives n for the s and p subshells being filled; in the d block the filling subshell is \((n - 1)d\), and in the f block \((n - 2)f\). So you can read a configuration straight off the table by walking along the rows to the element.
Worked example: bromine from the table
Write the configuration of bromine, Z = 35, by reading the periodic table. 1. The previous noble gas is argon, Z = 18, so start with [Ar]. 2. Walk along period 4: potassium and calcium are in the s block, giving \(4s^2\). 3. The ten d-block elements scandium to zinc give \(3d^{10}\). 4. In the p block, gallium is the first and bromine the fifth, giving \(4p^5\). 5. Result: \([\mathrm{Ar}]\,3d^{10} 4s^2 4p^5\), often written with 3d first because it belongs to a lower shell. 6. Check: \(18 + 10 + 2 + 5 = 35\). Bromine has 7 valence electrons (\(4s^2 4p^5\)), like every halogen in group 17.
Exceptions: chromium and copper
A few elements break the aufbau prediction. Chromium, Z = 24, is predicted to be \([\mathrm{Ar}]\,3d^4 4s^2\) but is actually \([\mathrm{Ar}]\,3d^5 4s^1\). Copper, Z = 29, is predicted to be \([\mathrm{Ar}]\,3d^9 4s^2\) but is actually \([\mathrm{Ar}]\,3d^{10} 4s^1\). The 3d and 4s orbitals are very close in energy, so moving one electron from 4s to 3d costs little, and a half-filled (\(d^5\)) or completely filled (\(d^{10}\)) d subshell is especially stable, with less electron repulsion. The elements below them follow suit: molybdenum is \([\mathrm{Kr}]\,4d^5 5s^1\) and silver \([\mathrm{Kr}]\,4d^{10} 5s^1\). Exceptions must be learned, not predicted.
Configurations of ions
For a main-group ion, add or remove electrons in the outermost subshell. A chloride ion, \(\mathrm{Cl^-}\), gains one 3p electron to become \([\mathrm{Ne}]\,3s^2 3p^6\), the same as argon; ions with the same configuration are isoelectronic. A magnesium ion, \(\mathrm{Mg^{2+}}\), loses its two 3s electrons and becomes \([\mathrm{Ne}]\), isoelectronic with neon. Transition metals hold a surprise: once their 3d orbitals contain electrons, 3d lies below 4s, so a transition-metal atom loses its 4s electrons before any 3d electrons, even though 4s filled first. Iron, \([\mathrm{Ar}]\,3d^6 4s^2\), forms \(\mathrm{Fe^{2+}}\) as \([\mathrm{Ar}]\,3d^6\), not \([\mathrm{Ar}]\,3d^4 4s^2\).
Worked example: ions of manganese and sulfur
Write the configurations of \(\mathrm{Mn^{2+}}\) and \(\mathrm{S^{2-}}\), and count unpaired electrons in \(\mathrm{Mn^{2+}}\). 1. Manganese, Z = 25, is \([\mathrm{Ar}]\,3d^5 4s^2\). 2. A transition metal loses 4s electrons first, so \(\mathrm{Mn^{2+}}\) is \([\mathrm{Ar}]\,3d^5\), with 23 electrons. 3. By Hund's rule the five 3d electrons occupy all five d orbitals singly: 5 unpaired electrons. 4. Sulfur, \([\mathrm{Ne}]\,3s^2 3p^4\), gains two 3p electrons: \(\mathrm{S^{2-}}\) is \([\mathrm{Ne}]\,3s^2 3p^6\), isoelectronic with argon. 5. Check the counts: \(25 - 2 = 23\) and \(16 + 2 = 18\), the number of electrons in argon.
Common mistakes to avoid
First, filling 3d before 4s in a neutral atom; for potassium and calcium, 4s comes first. Second, removing 3d electrons before 4s when forming transition-metal cations; 4s goes first. Third, pairing electrons in a p or d subshell before every orbital has one, which breaks Hund's rule. Fourth, writing \(3d^4 4s^2\) for chromium or \(3d^9 4s^2\) for copper. Fifth, putting more than 2, 6, 10 or 14 electrons in an s, p, d or f subshell. Sixth, forgetting to check that the superscripts add up to the number of electrons, especially for ions.
Key takeaways
In many-electron atoms, penetration and shielding make subshell energies rise s < p < d < f within a shell. Electrons fill orbitals in aufbau order (the n + l rule: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p ...), at most two per orbital with opposite spins, and singly with parallel spins before pairing (Hund's rule). Noble-gas shorthand separates core from valence electrons. The table's s, p, d and f blocks are 2, 6, 10 and 14 columns wide. Chromium (3d⁵4s¹) and copper (3d¹⁰4s¹) are exceptions. Transition-metal cations lose 4s electrons first.
Flashcards
Flashcard
A list of the occupied subshells and their electron counts
Test your understanding
Question 1 of 5
Which configuration is correct for a vanadium atom, Z = 23, in its ground state?
Question 2 of 5
How many unpaired electrons does a nitrogen atom (1s² 2s² 2p³) have?
Question 3 of 5
What is the electron configuration of the Fe³⁺ ion? (Fe is [Ar] 3d⁶ 4s².)
Question 4 of 5
What is the actual ground-state configuration of copper, Z = 29?
Question 5 of 5
Which ion is isoelectronic with neon?
