Chemistry › Section T · Organic chemistry › Topic T.1

Hydrocarbons

Compounds of just two elements, carbon and hydrogen, fuel our homes and cars and are the raw material for most plastics. Learning to name them, and to see how single, double and triple bonds change their behaviour, is the foundation of all organic chemistry.

Carbon, the great connector

Carbon forms four strong covalent bonds, including bonds to other carbons, so it builds chains, branches and rings: many millions of carbon compounds are known. Organic chemistry studies compounds built mainly from carbon bonded to hydrogen and other carbons; simple ones such as CO₂ and carbonates count as inorganic. The simplest, hydrocarbons, contain only carbon and hydrogen. They burn well, so they are our main fuels:

\mathrm{C_3H_8(g) + 5O_2(g) \rightarrow 3CO_2(g) + 4H_2O(l)}

Propane, the bottled camping gas, releases about 2,220 kJ per mole this way.

Alkanes: the saturated hydrocarbons

Alkanes contain only single bonds, so each carbon carries as many hydrogens as it can: they are saturated. Every carbon is \(sp^3\), with angles near 109.5°, so a chain is really a zigzag. Alkanes without rings fit \(\mathrm{C}_n\mathrm{H}_{2n+2}\), and each member of this homologous series differs from the next by one \(\mathrm{CH_2}\). The first ten are methane, ethane, propane, butane, pentane, hexane, heptane, octane, nonane and decane. Longer molecules have more electrons and more surface contact, so dispersion forces and boiling points rise: about −162 °C for methane, −1 °C for butane and 126 °C for octane. Fractional distillation of crude oil relies on this trend. Alkanes are fairly unreactive, but in ultraviolet light chlorine replaces a hydrogen, a substitution: \(\mathrm{CH_4 + Cl_2 \rightarrow CH_3Cl + HCl}\).

Naming branched alkanes

IUPAC names follow a recipe. 1. Find the longest continuous carbon chain, even if it bends on the page; it gives the parent name. 2. Number it from the end that gives the branches the lowest locants (position numbers). 3. Name each branch. An alkyl group is an alkane minus one hydrogen: methyl \(\mathrm{CH_3{-}}\), ethyl \(\mathrm{CH_3CH_2{-}}\), propyl \(\mathrm{CH_3CH_2CH_2{-}}\). Halogens are fluoro, chloro, bromo and iodo. 4. Use di-, tri- and tetra- for repeats, giving each group its own locant: 2,2-dimethyl, never 2-dimethyl. 5. List groups alphabetically, ignoring di- and tri-. Commas separate numbers; hyphens separate numbers from letters.

Worked example: naming a branched alkane

Name

\mathrm{CH_3CH(CH_3)CH_2CH(CH_2CH_3)_2}\,.

1. Picture it: \(\mathrm{CH_3}\), then a CH carrying a methyl, then \(\mathrm{CH_2}\), then a CH carrying two ethyl groups. 2. Longest chain: start at the first \(\mathrm{CH_3}\) and continue into one ethyl group, 4 + 2 = 6 carbons, so the parent is hexane; the other ethyl stays a branch. 3. Numbered from the left, the branches sit on C2 (methyl) and C4 (ethyl); from the other end they would be 3 and 5, so keep the left. 4. Alphabetical order puts ethyl before methyl: 4-ethyl-2-methylhexane. 5. Check: 6 + 1 + 2 = 9 carbons and 20 hydrogens, and \(\mathrm{C_9H_{20}}\) fits \(\mathrm{C}_n\mathrm{H}_{2n+2}\).

Worked example: the three isomers of C₅H₁₂

Structural isomers share a molecular formula but join their atoms in a different order. Find every alkane \(\mathrm{C_5H_{12}}\) and explain their boiling points. 1. Five carbons in a row: pentane, \(\mathrm{CH_3CH_2CH_2CH_2CH_3}\). 2. Four in a row plus a methyl, which must go on C2 (on C1 it would just lengthen the chain): 2-methylbutane, \(\mathrm{CH_3CH(CH_3)CH_2CH_3}\). 3. Three in a row plus two methyls, both on C2: 2,2-dimethylpropane, \(\mathrm{C(CH_3)_4}\). 4. Nothing else exists; "3-methylbutane" is 2-methylbutane numbered from the wrong end. 5. They boil at about 36 °C, 28 °C and 10 °C. With equal molar masses and only dispersion forces, shape decides: a more compact molecule touches its neighbours over less surface, so it boils lower.

Alkenes and alkynes

Hydrocarbons with C=C or C≡C bonds are unsaturated: they hold fewer hydrogens than the matching alkane. In an alkene, the C=C carbons are \(sp^2\), flat, with 120° angles; one double bond and no ring gives \(\mathrm{C}_n\mathrm{H}_{2n}\). In an alkyne, the C≡C carbons are \(sp\) and linear, and one triple bond gives \(\mathrm{C}_n\mathrm{H}_{2n-2}\). Names replace -ane with -ene or -yne. The parent chain must contain the multiple bond, numbered to give it the lowest locant: \(\mathrm{CH_2{=}CHCH_2CH_3}\) is but-1-ene and \(\mathrm{CH_3CH{=}CHCH_3}\) is but-2-ene (older style: 1-butene, 2-butene). Ethene, made by cracking larger alkanes, is a plant hormone that ripens fruit. Ethyne (acetylene) burns hot enough for welding.

Cis and trans isomers

As the topic on multiple bonds showed, the π bond blocks rotation about C=C. So the two methyl groups of but-2-ene can lie on one side, in cis-but-2-ene, or on opposite sides, in trans-but-2-ene. These geometric (cis-trans) isomers have the same atoms joined in the same order, arranged differently in space. They are separate compounds, boiling at about 4 °C (cis) and 1 °C (trans). An alkene has cis and trans forms only if each double-bond carbon carries two different groups. But-1-ene has none: its end carbon carries two hydrogens, and swapping identical groups changes nothing. (For more complex alkenes, IUPAC uses the general E/Z labels.)

Addition reactions

A π bond is weaker than a σ bond and its electrons are exposed, so alkenes are far more reactive than alkanes. Their typical reaction is addition: the π bond breaks and two new σ bonds form, one to each carbon, which becomes \(sp^3\). Hydrogen adds over a nickel, palladium or platinum catalyst: \(\mathrm{CH_2{=}CH_2 + H_2 \rightarrow CH_3CH_3}\). Bromine adds at room temperature and its orange-brown colour disappears, a quick test for C=C; alkanes do not decolourise it in the dark. Bromine alone gives 1,2-dibromoethane, but in bromine water, water joins in and the main product is 2-bromoethanol, \(\mathrm{CH_2BrCH_2OH}\). Steam adds with an acid catalyst to give ethanol, and HBr adds as H and Br. An alkyne can add twice: ethyne and 2 mol of \(\mathrm{H_2}\) give ethane. Thousands of ethene molecules can even add to one another, forming the polymer polyethylene.

Worked example: predicting addition products

Name the main product of each addition. (a) But-2-ene, \(\mathrm{CH_3CH{=}CHCH_3}\), with bromine. 1. One Br joins each double-bond carbon: \(\mathrm{CH_3CHBrCHBrCH_3}\). 2. Name it as a substituted alkane: 2,3-dibromobutane. (b) Propene with hydrogen bromide. 3. Propene, \(\mathrm{CH_2{=}CHCH_3}\), is unsymmetrical, so H and Br could go either way round. 4. Markovnikov's rule: H joins the double-bond carbon that already has more hydrogens, the \(\mathrm{CH_2}\) end, and Br joins the middle carbon. 5. Main product, with no peroxides present: 2-bromopropane, \(\mathrm{CH_3CHBrCH_3}\), with little 1-bromopropane. 6. Check: each product keeps every atom of both reactants, as an addition must.

Aromatic hydrocarbons

Benzene, \(\mathrm{C_6H_6}\), is a flat ring of six \(sp^2\) carbons whose six π electrons are delocalised all round the ring, as the topic on multiple bonds described. All six C–C bonds are identical, intermediate in length between single and double bonds, so benzene is drawn as a hexagon with a circle inside, or as either resonance structure. Compounds containing this ring are aromatic. Although benzene looks unsaturated, it resists addition, which would destroy the especially stable delocalised ring. It undergoes substitution instead: with an iron(III) bromide catalyst, \(\mathrm{C_6H_6 + Br_2 \rightarrow C_6H_5Br + HBr}\), giving bromobenzene. Methylbenzene (toluene) is a common solvent.

Common mistakes to avoid

First, naming from the chain drawn straight across the page instead of the longest chain, which may bend through a branch. Second, numbering from the wrong end: choose the lowest locants, and for alkenes the end nearer the double bond. Third, dropping a locant: 2,2-dimethylpropane, not 2-dimethylpropane. Fourth, assuming every \(\mathrm{C}_n\mathrm{H}_{2n}\) compound is an alkene; cyclohexane, \(\mathrm{C_6H_{12}}\), is a ring with only single bonds. Fifth, claiming cis and trans forms for but-1-ene, where one double-bond carbon carries two identical groups. Sixth, ignoring Markovnikov's rule when HBr adds to an unsymmetrical alkene. Seventh, treating benzene as an alkene: it substitutes rather than adds.

Key takeaways

Hydrocarbons contain only carbon and hydrogen and burn to carbon dioxide and water. Alkanes, \(\mathrm{C}_n\mathrm{H}_{2n+2}\), are saturated; their boiling points rise with chain length and fall with branching. Name from the longest chain, with the lowest locants and branches in alphabetical order. Alkenes, \(\mathrm{C}_n\mathrm{H}_{2n}\), and alkynes, \(\mathrm{C}_n\mathrm{H}_{2n-2}\), undergo addition, with HX following Markovnikov's rule; alkenes can be cis or trans. Benzene substitutes rather than adds.

Flashcards

Flashcard

Hydrocarbon

A compound of carbon and hydrogen only

Our main fuels, and the raw material for most plastics.

Test your understanding

Question 1 of 5

What is the IUPAC name of CH₃CH₂CH(CH₃)CH₂CH₂CH₃?

Question 2 of 5

What is the molecular formula of an alkyne with five carbon atoms, one triple bond and no rings?

Question 3 of 5

Which of these alkenes exists as separate cis and trans isomers?

Question 4 of 5

What is the main product when hydrogen bromide adds to propene, CH₂=CHCH₃, with no peroxides present?

Question 5 of 5

Pentane boils at about 36 °C and its isomer 2,2-dimethylpropane at about 10 °C. Why?

← Previous topicNext topic →