Chemistry › Section B · Atoms, molecules, and ions › Topic B.6
Naming compounds
Millions of compounds are known, so their names must follow rules that anyone can apply in either direction: from formula to name and from name to formula. A handful of patterns from IUPAC covers almost every simple inorganic compound you will meet.
Why names need rules
A systematic name carries the same information as a formula. Before naming anything, ask one question: is the compound ionic or molecular? Ionic compounds, usually a metal with a nonmetal or containing a polyatomic ion such as ammonium, are named from their ions, and the charges fix the ratio, so no counting prefixes are needed. Molecular compounds, usually nonmetals only, can combine in several ratios, so their names must state the number of each atom. Acids follow a third pattern. The rules here are those of the International Union of Pure and Applied Chemistry, IUPAC, which sets chemical names worldwide.
Binary ionic compounds
A binary compound contains just two elements. Name the cation first, using the metal's name unchanged, then the anion, using the nonmetal's stem plus -ide. So KBr is potassium bromide, MgO is magnesium oxide, \(\text{Li}_3\text{N}\) is lithium nitride and \(\text{Al}_2\text{S}_3\) is aluminium sulfide. The name never says how many ions there are: aluminium sulfide does not need to be called dialuminium trisulfide, because \(\text{Al}^{3+}\) and \(\text{S}^{2-}\) can only combine in one neutral ratio. To go from a name to a formula, write the two ions with their charges and balance them.
Compounds with polyatomic ions
Polyatomic ions keep their own names: \(\text{NH}_4\text{Cl}\) is ammonium chloride, \(\text{K}_2\text{SO}_4\) is potassium sulfate and \(\text{NaHCO}_3\), baking soda, is sodium hydrogen carbonate (IUPAC writes hydrogencarbonate as one word; textbooks often use two). Oxyanions of one element form families. The -ate ion is the reference, the -ite ion has one oxygen fewer, the prefix per- adds one more oxygen and hypo- takes away one more. For chlorine: perchlorate \(\text{ClO}_4^-\), chlorate \(\text{ClO}_3^-\), chlorite \(\text{ClO}_2^-\) and hypochlorite \(\text{ClO}^-\), the ion in household bleach. Adding hydrogen to an anion adds the word hydrogen: \(\text{HSO}_4^-\) is hydrogen sulfate, \(\text{HPO}_4^{2-}\) hydrogen phosphate and \(\text{H}_2\text{PO}_4^-\) dihydrogen phosphate.
Metals with more than one charge
Many transition metals, and a few others such as tin and lead, form ions of different charges, so a name like iron chloride is ambiguous. The Stock system adds the charge as a Roman numeral in brackets straight after the metal's name: \(\text{FeCl}_2\) is iron(II) chloride and \(\text{FeCl}_3\) is iron(III) chloride; \(\text{Cu}_2\text{O}\) is copper(I) oxide and CuO is copper(II) oxide. Metals with only one common charge, such as those of groups 1 and 2, aluminium, zinc and silver, are named without a numeral. Older names used -ous for the lower charge and -ic for the higher, as in ferrous and ferric, and survive on labels: stannous fluoride in toothpaste is tin(II) fluoride, \(\text{SnF}_2\).
Worked example: naming ionic compounds
Name \(\text{Fe}_2\text{O}_3\) and \(\text{Co(NO}_3)_2\), then write the formula of tin(IV) oxide. 1. \(\text{Fe}_2\text{O}_3\): three oxide ions give \(3(-2) = -6\), so two iron ions carry \(+6\) in total, \(+3\) each. Name: iron(III) oxide, the main part of rust. 2. \(\text{Co(NO}_3)_2\): two nitrate ions give \(-2\), so the single cobalt ion is \(+2\). Name: cobalt(II) nitrate. 3. Tin(IV) oxide contains \(\text{Sn}^{4+}\) and \(\text{O}^{2-}\); two oxides balance one tin, so the formula is \(\text{SnO}_2\). 4. Check each answer: \(2(+3) + 3(-2) = 0\), \(+2 + 2(-1) = 0\) and \(+4 + 2(-2) = 0\).
Hydrates
Some ionic compounds crystallise with water molecules built into their structure; these are hydrates. The formula adds a raised dot and the number of water molecules per formula unit, and the name adds a counting prefix plus the word hydrate. The prefixes for 1 to 10, Greek apart from Latin nona-, are mono-, di-, tri-, tetra-, penta-, hexa-, hepta-, octa-, nona- and deca-. So \(\text{CuSO}_4 \cdot 5\text{H}_2\text{O}\), the bright blue crystals common in school laboratories, is copper(II) sulfate pentahydrate, and Epsom salt, \(\text{MgSO}_4 \cdot 7\text{H}_2\text{O}\), is magnesium sulfate heptahydrate. Heating drives the water off, leaving the anhydrous compound, which for copper(II) sulfate is white.
Binary molecular compounds
For two nonmetals, name the element farther left in the periodic table first; if both are in the same group, the lower one comes first. The noble gases break this pattern: xenon is always named first, as in its fluorides. The second element takes the -ide ending, and the same counting prefixes give the number of each atom. The prefix mono- is dropped from the first element: CO is carbon monoxide and \(\text{CO}_2\) carbon dioxide, while \(\text{PCl}_3\) is phosphorus trichloride and \(\text{SF}_6\) sulfur hexafluoride. IUPAC's current rules keep the whole prefix, as in dinitrogen pentaoxide for \(\text{N}_2\text{O}_5\), allowing only monoxide as a shortened form; many books still write pentoxide, and both are understood. A few compounds keep common names: water \(\text{H}_2\text{O}\), ammonia \(\text{NH}_3\) and methane \(\text{CH}_4\).
Worked example: naming molecular compounds
Name \(\text{SiF}_4\) and \(\text{ICl}_3\), then write the formula of xenon tetrafluoride. 1. \(\text{SiF}_4\): both are nonmetals or metalloids, so use prefixes. Silicon is farther left, so it comes first with no mono-; four fluorines give tetrafluoride. Name: silicon tetrafluoride. 2. \(\text{ICl}_3\): iodine and chlorine are both in group 17, and iodine is lower, so it comes first. Name: iodine trichloride. 3. Xenon tetrafluoride: as a noble gas, xenon is named first; no prefix on it means one atom, and tetra- means four fluorines, giving \(\text{XeF}_4\). 4. Check: no Roman numerals appear, because these are molecular compounds, and every prefix matches a subscript.
Naming acids
Acids are compounds that release hydrogen ions, \(\text{H}^+\), in water, and their names describe the water solution, marked (aq). A binary acid, hydrogen plus one other nonmetal, is named hydro- + stem + -ic acid: HCl(aq) is hydrochloric acid, HBr(aq) hydrobromic acid and \(\text{H}_2\text{S}\)(aq) hydrosulfuric acid. The pure gas HCl is simply hydrogen chloride. An oxyacid comes from an oxyanion, with no hydro- prefix: -ate becomes -ic acid and -ite becomes -ous acid. So \(\text{H}_2\text{SO}_4\) is sulfuric acid, \(\text{H}_2\text{SO}_3\) sulfurous acid, \(\text{HNO}_3\) nitric acid, \(\text{HNO}_2\) nitrous acid, \(\text{H}_3\text{PO}_4\) phosphoric acid and \(\text{HClO}\) hypochlorous acid.
Common mistakes to avoid
First, using prefixes for ionic compounds: \(\text{CaCl}_2\) is calcium chloride, not calcium dichloride. Second, leaving prefixes out of molecular names: \(\text{N}_2\text{O}\) and \(\text{NO}_2\) need them to be told apart. Third, reading the Roman numeral as a count of atoms: it gives the metal ion's charge, so \(\text{Fe}_2\text{O}_3\) is iron(III) oxide, not iron(II) oxide. Fourth, adding needless numerals to fixed-charge metals, as in sodium(I) chloride. Fifth, mixing up -ate and -ite, or -ic and -ous: sulfate gives sulfuric acid and sulfite gives sulfurous acid. Sixth, putting hydro- on oxyacids; it belongs only to binary acids.
Key takeaways
First decide whether a compound is ionic or molecular. Ionic: cation name, then anion name, with -ide for monatomic anions and no prefixes; add a Roman numeral for the charge of a metal that has more than one; hydrates add a prefix and hydrate. Oxyanions follow per-, -ate, -ite and hypo- for falling oxygen counts. Molecular: prefixes count atoms, mono- is dropped from the first element, and the second ends in -ide. Acids: hydro- + -ic acid for binary acids; -ate becomes -ic acid and -ite becomes -ous acid for oxyacids.
Flashcards
Flashcard
Metal name, then nonmetal stem + -ide
Test your understanding
Question 1 of 5
What is the systematic name of Fe₂(SO₄)₃?
Question 2 of 5
What is the formula of copper(I) oxide?
Question 3 of 5
What is the name of CS₂?
Question 4 of 5
What is the name of HNO₂ dissolved in water?
Question 5 of 5
What is the name of CuSO₄·5H₂O?
