Chemistry › Section U · Nuclear chemistry › Topic U.4

Transmutation and nuclear energy

Nuclear reactions can turn one element into another on demand, and they can release millions of times more energy per gram than any fuel we burn. This topic covers how new nuclides are made, how fission powers reactors, and why fusion, the energy source of the Sun, is so hard to tame.

Transmutation

Changing one nuclide into another is called transmutation. Radioactive decay does it naturally; bombardment does it on purpose, by firing particles at target nuclei. The first deliberate case came in 1919, when Ernest Rutherford turned nitrogen into oxygen with alpha particles: \({}^{14}_{7}\mathrm{N} + {}^{4}_{2}\mathrm{He} \rightarrow {}^{17}_{8}\mathrm{O} + {}^{1}_{1}\mathrm{p}\). A positive projectile is repelled by the positive target, so it must be given great speed in a particle accelerator, such as a cyclotron or a linear accelerator, inside a vacuum. Neutrons are uncharged, feel no repulsion, and are absorbed even when slow, which makes them ideal projectiles.

Making elements beyond uranium

Uranium, Z = 92, is the heaviest element found in quantity in nature. Every element from 93 to 118 has been made artificially. The first, neptunium, was made in 1940 by firing neutrons at uranium-238; the uranium-239 formed undergoes β⁻ decay:

{}^{238}_{92}\mathrm{U} + {}^{1}_{0}\mathrm{n} \rightarrow {}^{239}_{92}\mathrm{U} \rightarrow {}^{239}_{93}\mathrm{Np} + {}^{0}_{-1}\mathrm{e}

Neptunium-239 (t½ ≈ 2.36 days) then undergoes a second β⁻ decay to plutonium-239, \({}^{239}_{94}\mathrm{Pu}\). The same steps happen inside every uranium-fuelled reactor, which is why spent fuel contains plutonium. The heaviest elements are made a few atoms at a time by colliding nuclei in accelerators, and many last only seconds or less.

Fission

In fission, a heavy nucleus splits into two medium-sized nuclei and a few neutrons. Uranium-235 does this after absorbing a slow neutron, which makes an unstable uranium-236 nucleus. The split is not always the same; one possibility is

{}^{235}_{92}\mathrm{U} + {}^{1}_{0}\mathrm{n} \rightarrow {}^{140}_{54}\mathrm{Xe} + {}^{94}_{38}\mathrm{Sr} + 2\,{}^{1}_{0}\mathrm{n}

Check: \(235 + 1 = 140 + 94 + 2\) and \(92 = 54 + 38\). The fragments lie nearer the peak of the binding energy per nucleon curve, so the products have less mass than the reactants. Each fission releases about 200 MeV, and on average about 2.4 neutrons.

Worked example: energy from a gram of uranium-235

If each fission releases 200 MeV, how much energy does 1.00 g of uranium-235 (235.04 g mol⁻¹) give, and how does it compare with burning methane (about 55.5 kJ per gram)? 1. Energy per fission: \(200 \times 1.602 \times 10^{-13}\ \mathrm{J} = 3.20 \times 10^{-11}\) J. 2. Nuclei: \(\frac{1.00}{235.04} \times 6.022 \times 10^{23} = 2.56 \times 10^{21}\). 3. Total: \(2.56 \times 10^{21} \times 3.20 \times 10^{-11} = 8.21 \times 10^{10}\) J. 4. Compare: \(8.21 \times 10^{10} \div 5.55 \times 10^{4} \approx 1.5 \times 10^{6}\). Fission gives about 1.5 million times as much energy per gram. 5. Check: \(\frac{3.20 \times 10^{-11}\ \mathrm{J}}{c^2}\) is about 0.09% of the nucleus's mass, so only a tiny fraction of the mass becomes energy.

Chain reactions and critical mass

Because each fission releases more than one neutron, those neutrons can split further nuclei, which release more neutrons: a chain reaction. Whether it keeps going depends on how many neutrons escape or are absorbed without causing fission. A sample with too little material, where too many neutrons leak out through its surface, is subcritical and the chain dies away. At the critical mass, on average exactly one neutron from each fission causes another, and the reaction runs steadily. With more, it is supercritical and the rate grows rapidly. The critical mass depends on the isotope, its purity and density, its shape (a sphere loses the fewest neutrons) and any surrounding material that reflects neutrons back.

Inside a fission reactor

A power reactor keeps the chain reaction exactly critical. Its fuel is uranium oxide pellets in metal-clad rods; natural uranium is only 0.72% uranium-235, so it is enriched to about 3–5%, far below weapons grade, which is why a reactor cannot explode like a bomb. A moderator, usually water, sometimes heavy water or graphite, slows fast neutrons so that uranium-235 absorbs them. Control rods of boron, cadmium or hafnium absorb neutrons; pushing them in slows the reaction, and fully inserting them shuts it down. Boron-10 captures a neutron as \({}^{10}_{5}\mathrm{B} + {}^{1}_{0}\mathrm{n} \rightarrow {}^{7}_{3}\mathrm{Li} + {}^{4}_{2}\mathrm{He}\). A coolant carries the heat away to make steam for a turbine, and thick steel and concrete shielding and containment hold in the radiation.

Risks: meltdown and waste

Even after shutdown, fission products keep decaying and releasing heat, so cooling must never stop. If it does, the core can overheat and melt; hot zirconium cladding also reacts with steam to make hydrogen gas, which can explode. Loss of cooling after a tsunami caused meltdowns at Fukushima Daiichi in Japan in 2011. At Chernobyl in 1986, a reactor's power surged out of control during a test, and the explosion and graphite fire spread radioactive material widely. Spent fuel holds intensely radioactive fission products and long-lived plutonium, so it must be stored safely for thousands of years.

Fusion

In fusion, light nuclei join into a heavier one, moving up the steep left side of the binding energy curve. The Sun's net reaction turns four hydrogen-1 nuclei into one helium-4 nucleus: \(4\,{}^{1}_{1}\mathrm{H} \rightarrow {}^{4}_{2}\mathrm{He} + 2\,{}^{0}_{+1}\mathrm{e}\), plus neutrinos and energy. Nuclei are all positive and repel strongly, so they fuse only when moving extremely fast: the Sun's core is about 15 million K, and reactors on Earth need over 100 million K. At such temperatures matter is a plasma of bare nuclei and electrons. Fusion fuel is abundant and makes no long-lived fission products, but no power plant yet produces net electricity from it.

Worked example: deuterium–tritium fusion

Reactor designs mostly use \({}^{2}_{1}\mathrm{H} + {}^{3}_{1}\mathrm{H} \rightarrow {}^{4}_{2}\mathrm{He} + {}^{1}_{0}\mathrm{n}\). Using atomic masses 2.014102 u, 3.016049 u, 4.002603 u and 1.008665 u, find the energy released. 1. Reactants: \(2.014102 + 3.016049 = 5.030151\) u. 2. Products: \(4.002603 + 1.008665 = 5.011268\) u. 3. Mass lost: \(5.030151 - 5.011268 = 0.018883\) u. 4. Energy: \(0.018883 \times 931.5 = 17.59\) MeV. 5. Per nucleon: \(17.59 \div 5 = 3.52\) MeV, about four times fission's \(200 \div 236 = 0.85\) MeV per nucleon. Magnetic bottles called tokamaks and laser-driven implosions are the two main ways to confine the fuel; in 2022 a laser experiment first released more fusion energy than the laser light delivered to its target.

Common mistakes to avoid

First, forgetting the neutron that starts fission, or the neutrons it releases, when balancing. Second, confusing the moderator, which slows neutrons, with control rods, which absorb them. Third, thinking critical mass means an explosion; critical means a steady chain, while a bomb must be strongly supercritical. Fourth, saying fission and fusion destroy matter; the nucleons are all still there, and only a small mass difference becomes energy. Fifth, thinking fusion is hot because it releases heat; the high temperature is needed first, to overcome repulsion.

Key takeaways

Transmutation changes one nuclide into another, by decay or by bombardment; neutron capture and β⁻ decay turn uranium-238 into plutonium-239. Fission splits heavy nuclei, releasing about 200 MeV and 2–3 neutrons each, so a chain reaction can run once the critical mass is reached. Reactors use enriched fuel, a moderator, control rods, a coolant and shielding. Fusion joins light nuclei, such as deuterium and tritium (17.6 MeV), but needs temperatures above 100 million K and is not yet a power source.

Flashcards

Flashcard

Transmutation

Changing one nuclide into another

By decay or by bombardment.

Test your understanding

Question 1 of 5

Complete the fission equation ²³⁵₉₂U + ¹₀n → ¹⁴⁰₅₅Cs + ? + 2 ¹₀n.

Question 2 of 5

What is the job of the moderator in a fission reactor?

Question 3 of 5

What happens in a sample of fissile material at exactly its critical mass?

Question 4 of 5

Why does fusion need temperatures of over 100 million K on Earth?

Question 5 of 5

Uranium-238 captures a neutron, and the product undergoes two beta-minus decays. What is formed?

← Previous topicNext topic →