Chemistry › Section U · Nuclear chemistry › Topic U.1
Nuclear structure and stability
Every chemical reaction so far has rearranged electrons and left nuclei untouched. Nuclear chemistry looks inside the nucleus itself: what holds it together, how much energy is locked up there, and why some nuclei last forever while others fall apart.
A tiny, crowded centre
A nucleus holds protons and neutrons, together called nucleons, in a region only a few femtometres across (1 fm = \(10^{-15}\) m), while the whole atom is about \(10^{-10}\) m wide. Almost all the atom's mass sits in that speck, so nuclear matter is astonishingly dense: roughly \(2 \times 10^{17}\) kg m⁻³. A teaspoon of it would have a mass of about a billion tonnes. One particular nucleus is called a nuclide and written \({}^{A}_{Z}\mathrm{X}\), where Z is the atomic number (protons) and A the mass number (protons plus neutrons), as in the topic on isotopes. The neutron number is \(N = A - Z\).
The strong nuclear force
Protons are positively charged and packed extremely close together, so they repel one another very strongly. A nucleus survives only because of the strong nuclear force, an attraction that acts between any two nucleons: proton and proton, neutron and neutron, or proton and neutron. Within a few femtometres it is far stronger than the electrical repulsion, but it fades to almost nothing beyond that. Electrical repulsion, by contrast, reaches across the whole nucleus. Neutrons add strong-force attraction without adding any repulsion, which is why they matter so much for stability.
Mass defect
Weigh a nucleus and it always comes out lighter than the separate protons and neutrons that make it. That missing mass is the mass defect, Δm. The easiest way to find it uses atomic masses: count each proton as a hydrogen-1 atom (1.007825 u) and each neutron as 1.008665 u. The electrons in the hydrogen atoms then match the electrons in the neutral atom, so they cancel.
The mass has not vanished: it was carried off as energy when the nucleons came together.
Binding energy and E = mc²
Einstein's relation \(E = mc^2\) converts the mass defect into the nuclear binding energy: the energy released when a nucleus forms from its nucleons, and equally the energy needed to pull it apart again. With m in kilograms and \(c = 2.998 \times 10^8\) m s⁻¹, E comes out in joules. Nuclear energies are usually quoted in mega-electronvolts, where 1 eV = \(1.602 \times 10^{-19}\) J and 1 MeV = \(10^6\) eV. A handy shortcut follows: a mass of 1 u is equivalent to 931.5 MeV, so
Worked example: binding energy of helium-4
A helium-4 atom has a mass of 4.002603 u. Find its binding energy. 1. Count: Z = 2 protons and N = 4 − 2 = 2 neutrons. 2. Mass of the parts: \(2(1.007825) + 2(1.008665) = 4.032980\) u. 3. Mass defect: \(4.032980 - 4.002603 = 0.030377\) u. 4. Energy: \(0.030377 \times 931.5 = 28.30\) MeV per nucleus. 5. Per mole: \(28.30\) MeV is \(4.533 \times 10^{-12}\) J, and multiplying by \(6.022 \times 10^{23}\) mol⁻¹ gives \(2.73 \times 10^{12}\) J mol⁻¹, or \(2.73 \times 10^{9}\) kJ mol⁻¹. 6. Check: a typical chemical bond is worth a few hundred kJ mol⁻¹, so nuclear binding is millions of times stronger.
Binding energy per nucleon
Big nuclei have big binding energies simply because they have more nucleons, so stability is compared with the binding energy per nucleon: the total binding energy divided by A. For helium-4 it is \(28.30 \div 4 = 7.07\) MeV. Plotted against A, the curve rises steeply through the light nuclei, peaks at about 8.8 MeV in the region of iron-56, and then falls slowly to about 7.6 MeV for uranium-238. Nuclei near the peak are the most tightly bound. This one curve explains nuclear power: splitting a heavy nucleus or joining two light ones both move towards the peak, so both release energy.
Worked example: iron-56, near the peak
An iron-56 atom has a mass of 55.934936 u. Find its binding energy per nucleon. 1. Count: Z = 26 and N = 56 − 26 = 30. 2. Mass of the parts: \(26(1.007825) + 30(1.008665) = 26.203450 + 30.259950 = 56.463400\) u. 3. Mass defect: \(56.463400 - 55.934936 = 0.528464\) u. 4. Binding energy: \(0.528464 \times 931.5 = 492.3\) MeV. 5. Per nucleon: \(492.3 \div 56 = 8.790\) MeV. 6. Check: this is about 24% more than helium-4's 7.07 MeV, consistent with iron sitting at the top of the curve.
The band of stability
Of the thousands of known nuclides, only about 250 are stable. Plot neutrons against protons and the stable ones form a narrow band of stability. Light stable nuclides have N ≈ Z, a neutron-to-proton (n/p) ratio near 1: carbon-12 and nitrogen-14 are exactly 1. Heavier ones need extra neutrons to dilute the growing repulsion, so the band curves upwards: iron-56 has n/p = 1.15 and lead-208 has 1.54. Every nuclide with Z above 82 is radioactive, even bismuth-209, although its half-life of about \(2 \times 10^{19}\) years makes it effectively stable. Nuclides off the band decay towards it, and the kind of decay depends on which side they lie, as a later topic shows.
Even numbers and magic numbers
Two patterns help predict stability. First, nucleons pair up, so even numbers are favoured: more than half of all stable nuclides have even Z and even N, while stable odd–odd nuclides are rare, the main examples being hydrogen-2, lithium-6, boron-10 and nitrogen-14. Second, nuclei with 2, 8, 20, 28, 50 or 82 protons or neutrons, or 126 neutrons, are especially stable. These magic numbers mark filled nuclear shells, much as filled electron shells make noble gases unreactive. Tin, with 50 protons, has ten stable isotopes, more than any other element. Doubly magic nuclei such as helium-4, oxygen-16, calcium-40 and lead-208 are exceptionally stable.
Common mistakes to avoid
First, adding up proton masses and electron masses inconsistently: either use hydrogen-1 atoms with the atomic mass, or bare protons with the nuclear mass, never a mixture. Second, subtracting the wrong way round: the parts are heavier, so the mass defect is positive. Third, multiplying a mass in u by \(c^2\) directly; convert to kilograms first, or use 931.5 MeV per u. Fourth, judging stability by total binding energy instead of binding energy per nucleon. Fifth, assuming every nucleus has N = Z; that holds only for light nuclides.
Key takeaways
A nucleus is tiny and extremely dense, held together by the short-range strong force acting between all nucleons. Its mass is less than that of its parts; this mass defect, converted with E = mc² or 931.5 MeV per u, is the binding energy. Binding energy per nucleon peaks near iron-56, so fission of heavy nuclei and fusion of light ones both release energy. Stable nuclides lie in a band whose n/p ratio rises from 1 to about 1.5, with even numbers and magic numbers favoured, and nothing above Z = 82 is stable.
Flashcards
Flashcard
A proton or a neutron
Test your understanding
Question 1 of 5
A lithium-7 atom has a mass of 7.016003 u. Using 1.007825 u for hydrogen-1 and 1.008665 u for a neutron, what is its mass defect?
Question 2 of 5
A nucleus has a mass defect of 0.0100 u. What is its binding energy?
Question 3 of 5
Which statement about binding energy per nucleon is correct?
Question 4 of 5
Which nuclide has a neutron-to-proton ratio of 1.00?
Question 5 of 5
Why do heavy stable nuclei such as lead-208 contain many more neutrons than protons?
