Chemistry › Section R · Metals, metalloids, and nonmetals › Topic R.6
Oxygen and sulfur
Oxygen is the most abundant element in the Earth's crust and combines with almost everything; sulfur, just below it in group 16, is the raw material for sulfuric acid, the chemical that industry makes in the largest amount. Together they also explain acid rain.
Oxygen: abundant and reactive
Oxygen makes up roughly 46% of the Earth's crust by mass, mostly in silicates and oxides, and 21% of dry air by volume, kept there by photosynthesis. Industry obtains it by fractional distillation of liquid air; oxygen boils at 90 K, above nitrogen's 77 K. In the laboratory it is made by decomposing hydrogen peroxide over a manganese(IV) oxide catalyst:
\(\mathrm{O_2}\) is a colourless gas, slightly soluble in water, and it is paramagnetic, with two unpaired electrons, as molecular orbital theory predicts. Oxygen is second only to fluorine in electronegativity, and it reacts directly with most elements, especially on heating.
Two allotropes: O₂ and O₃
Oxygen has two allotropes. Dioxygen, \(\mathrm{O_2}\), is the stable form. Ozone, \(\mathrm{O_3}\), is a bent molecule with two equivalent bonds, described by two resonance structures. It forms when an electric discharge or ultraviolet light splits \(\mathrm{O_2}\), and its formation is endothermic:
Ozone is a pale blue, sharp-smelling gas and a far stronger oxidising agent than \(\mathrm{O_2}\), so it is used to disinfect water. High in the stratosphere, the ozone layer absorbs much of the Sun's harmful ultraviolet radiation; at ground level, ozone formed in smog irritates the lungs and damages crops.
Oxides, peroxides and superoxides
Oxygen usually has the oxidation state −2, as in oxides. With the alkali metals, burned in air, three kinds of compound form. Lithium gives the oxide, \(\mathrm{4Li(s) + O_2(g) \rightarrow 2Li_2O(s)}\); sodium gives mainly the peroxide, \(\mathrm{2Na(s) + O_2(g) \rightarrow Na_2O_2(s)}\), containing \(\mathrm{O_2^{2-}}\) with oxygen at −1; and potassium, like rubidium and caesium, gives the superoxide, \(\mathrm{K(s) + O_2(g) \rightarrow KO_2(s)}\), containing \(\mathrm{O_2^-}\) with oxygen at −½. Only with fluorine is oxygen positive: +2 in \(\mathrm{OF_2}\). Soluble metal oxides are basic,
and most metal oxides react with acids; nonmetal oxides, as the metalloids-and-nonmetals topic showed, are mostly acidic.
Worked example: oxygen from hydrogen peroxide
Household hydrogen peroxide is 3.00% \(\mathrm{H_2O_2}\) by mass. What volume of oxygen, at 273.15 K and 1 bar (22.71 L mol⁻¹), can 50.0 g of it release? 1. Mass of \(\mathrm{H_2O_2}\): \(0.0300 \times 50.0 = 1.50\) g. 2. Molar mass: \(2(1.008) + 2(16.00) = 34.02\) g mol⁻¹, so \(n = 1.50 \div 34.02 = 0.04409\) mol. 3. Ratio: 2 mol of \(\mathrm{H_2O_2}\) give 1 mol of \(\mathrm{O_2}\), so \(n(\mathrm{O_2}) = 0.02205\) mol. 4. Volume: \(0.02205 \times 22.71 = 0.501\) L. 5. Check oxidation states: oxygen at −1 in the peroxide goes to −2 in water and 0 in \(\mathrm{O_2}\), a disproportionation, so only half the oxygen atoms end up as gas.
Sulfur and its allotropes
Sulfur occurs as the free element near volcanoes and in salt domes, in sulfide and sulfate minerals, and as hydrogen sulfide in natural gas. Most sulfur today is recovered from natural gas and oil refining by the Claus process:
At room temperature sulfur is a yellow solid made of crown-shaped \(\mathrm{S_8}\) rings. Rhombic sulfur, the stable form, changes above 95.3 °C into monoclinic sulfur, which melts at about 119 °C. Both contain \(\mathrm{S_8}\) rings; they differ only in how the rings pack in the crystal. On stronger heating the rings break and join into long chains, and the liquid thickens. Poured into cold water, it gives rubbery plastic sulfur.
Sulfur's compounds
Sulfur's common oxidation states are −2, +4 and +6. Hydrogen sulfide, \(\mathrm{H_2S}\), smells of rotten eggs and is about as toxic as hydrogen cyanide; it is especially dangerous because it soon numbs the sense of smell. Metal sulfides such as \(\mathrm{FeS_2}\) and ZnS contain sulfur in negative states. Sulfur burns with a blue flame to give sulfur dioxide, \(\mathrm{S(s) + O_2(g) \rightarrow SO_2(g)}\), a choking gas with sulfur at +4. It dissolves in water as sulfurous acid, a weak acid whose salts, the sulfites, are used as food preservatives. Further oxidation gives sulfur trioxide, with sulfur at +6, the anhydride of sulfuric acid, \(\mathrm{H_2SO_4}\), whose salts are the sulfates.
Sulfuric acid: the contact process
Sulfuric acid is made in larger amounts than any other industrial chemical, over 200 million tonnes a year, mostly for phosphate fertilisers. In the contact process: 1. Sulfur is burned to \(\mathrm{SO_2}\). 2. \(\mathrm{SO_2}\) and air pass over a vanadium(V) oxide catalyst at about 400-450 °C:
This is the reaction whose ΔH the enthalpy topic found by Hess's law. 3. \(\mathrm{SO_3}\) is absorbed in concentrated sulfuric acid to form oleum,
because adding it straight to water makes a corrosive mist. 4. Oleum is diluted:
Concentrated sulfuric acid is a powerful dehydrating agent, and diluting it releases much heat, so always add the acid slowly to water.
Worked example: sulfuric acid from sulfur
What mass of sulfuric acid can be made from \(1.00 \times 10^3\) kg of sulfur, and what mass of oxygen does it consume? 1. Overall, each S atom ends up in one \(\mathrm{H_2SO_4}\): \(\mathrm{S + \tfrac{3}{2}O_2 + H_2O \rightarrow H_2SO_4}\), adding the burning, oxidation and absorption steps. 2. Moles of S: \(1.00 \times 10^6\) g \(\div 32.06\) g mol⁻¹ \(= 3.119 \times 10^4\) mol. 3. Sulfuric acid: \(3.119 \times 10^4 \times 98.08\) g \(= 3.06 \times 10^3\) kg. 4. Oxygen, 1.5 : 1: \(4.679 \times 10^4 \times 32.00\) g \(= 1.50 \times 10^3\) kg. 5. Water, 1 : 1: \(3.119 \times 10^4 \times 18.02\) g \(= 562\) kg. 6. Check mass balance: \(1000 + 1497 + 562 = 3059\) kg in, matching \(3.06 \times 10^3\) kg out.
Acid rain
Rain is naturally slightly acidic, about pH 5.6, because it dissolves carbon dioxide. Burning coal and oil, and smelting sulfide ores, releases sulfur dioxide, and hot engines and furnaces produce nitrogen oxides. In the air these are oxidised and dissolve to form sulfuric and nitric acids, so rain below about pH 5.6 is called acid rain. It damages forests, dissolves limestone and marble buildings, and acidifies lakes: a fall from pH 7 to pH 5 means 100 times more hydrogen ions, and many fish cannot breed below about pH 5. Power stations now remove \(\mathrm{SO_2}\) with limestone scrubbers,
and the sulfite is oxidised to gypsum. Scrubbers and low-sulfur fuels have greatly reduced acid rain in many countries.
Common mistakes to avoid
First, calling \(\mathrm{O_2}\) and \(\mathrm{O_3}\) isotopes; they are allotropes, different molecules of the same element. Second, assuming oxygen is always −2: it is −1 in peroxides, −½ in superoxides and +2 in \(\mathrm{OF_2}\). Third, thinking rhombic and monoclinic sulfur are made of different molecules; both are \(\mathrm{S_8}\) rings, packed differently. Fourth, dissolving \(\mathrm{SO_3}\) directly in water in the contact process; it is absorbed in sulfuric acid as oleum. Fifth, mixing up catalysts: vanadium(V) oxide for the contact process, iron for Haber–Bosch, platinum-rhodium for Ostwald. Sixth, reading pH 5 as slightly more acidic than pH 7; it is 100 times more acidic.
Key takeaways
Oxygen is the most abundant element in the crust; it is made from liquid air, or from \(\mathrm{H_2O_2}\) in the laboratory. Its allotropes are \(\mathrm{O_2}\) and ozone, \(\mathrm{O_3}\). Oxygen is usually −2, but forms peroxides (−1), superoxides (−½) and \(\mathrm{OF_2}\) (+2). Sulfur, mostly recovered from \(\mathrm{H_2S}\), exists as \(\mathrm{S_8}\) rings in rhombic and monoclinic forms, and shows the states −2, +4 and +6. The contact process oxidises \(\mathrm{SO_2}\) to \(\mathrm{SO_3}\) over \(\mathrm{V_2O_5}\), absorbs it as oleum and dilutes it to sulfuric acid. Sulfur and nitrogen oxides cause acid rain, now cut by scrubbers.
Flashcards
Flashcard
About 46% by mass, the most abundant element there
Test your understanding
Question 1 of 5
Which word correctly describes the relationship between O₂ and O₃?
Question 2 of 5
How do rhombic and monoclinic sulfur differ?
Question 3 of 5
Which catalyst is used for 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) in the contact process?
Question 4 of 5
What mass of sulfuric acid (98.08 g/mol) can be made from 64.12 g of sulfur (32.06 g/mol), assuming complete conversion?
Question 5 of 5
Acid rain lowers a lake's pH from 7.0 to 5.0. By what factor has the hydrogen ion concentration increased?
