Chemistry › Section B · Atoms, molecules, and ions › Topic B.4

The periodic table

The periodic table is not just a list of 118 elements: it is a map in which position predicts behaviour. Knowing how it was built, and how to read its rows, columns and regions, lets you forecast how an element you have never met is likely to act.

Order among the elements

By the 1860s chemists knew about 60 elements and had noticed families among them. Lithium, sodium and potassium are all soft, shiny metals that react vigorously with water. Fluorine, chlorine, bromine and iodine are all coloured, reactive nonmetals that combine readily with those metals. Magnesium, calcium and strontium form a third family. Within a family the properties change gradually from one member to the next, and the families differ sharply from one another. The question was whether one scheme could arrange every element so that these families appeared naturally, rather than being spotted one at a time.

Mendeleev's bold predictions

In 1869 Dmitri Mendeleev in Russia published a table that listed the elements in order of increasing atomic mass and placed similar elements in the same column; Lothar Meyer in Germany reached a similar table independently, published in 1870. Mendeleev went further. Where an element seemed to be missing, he left a gap and predicted its properties from its neighbours. Gallium (found in 1875) and germanium (1886) matched his predictions closely, which convinced chemists. He also trusted chemical families over masses: he placed tellurium (127.60) before iodine (126.90) so that iodine sat with the other halogens.

Worked example: predicting a missing element

Predict the atomic mass and oxide formula of the element between silicon and tin in its column, with gallium and arsenic on either side, as Mendeleev did. 1. Collect neighbours' atomic masses: silicon 28.085, tin 118.71, gallium 69.723, arsenic 74.922. 2. Average all four: \((28.085 + 118.71 + 69.723 + 74.922) \div 4 = 72.86\). 3. Predict the oxide from the column: silicon forms \(\text{SiO}_2\) and tin forms \(\text{SnO}_2\), so the missing element should form \(\text{XO}_2\). 4. Compare with germanium: its atomic mass is 72.630, within about 0.3 percent of the prediction, and its oxide is \(\text{GeO}_2\). A column really does carry information.

Atomic number, not mass

Ordering by mass left a few awkward pairs, such as tellurium and iodine, and argon (39.95) before potassium (39.098). In 1913 Henry Moseley measured the X-rays given off by different elements and showed that they change in regular steps that follow the charge on the nucleus, the atomic number. Ordered by atomic number, every awkward pair falls into place: tellurium is 52 and iodine 53. This gives the periodic law: the properties of the elements repeat periodically when the elements are arranged by atomic number. The reason, as later topics show, is that members of a group have similar arrangements of their outermost electrons. A whole family was missing from Mendeleev's table: the noble gases, isolated from 1894 onwards, beginning with argon, slotted in as a new column.

Reading the modern table

Today's table holds 118 confirmed elements, the last four named in 2016, ending with oganesson (Og, 118). The rows are periods, numbered 1 to 7, and the columns are groups, numbered 1 to 18 as IUPAC recommends; older American tables use labels such as 1A and 7A instead. Each box gives the atomic number, the symbol, the atomic mass and often the name. Two rows are usually printed below the main body to keep the table a manageable width. Elements with no stable isotopes, such as technetium (43), promethium (61) and most elements after bismuth (83), show a mass number in square brackets instead of an average atomic mass.

Metals, nonmetals and metalloids

About four in five elements are metals, filling the left and centre of the table. Metals are shiny, conduct heat and electricity well, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wires); all are solids at room temperature except mercury. Nonmetals sit at the upper right. They are poor conductors, and the solids are dull and brittle; many, such as nitrogen, oxygen, chlorine and the noble gases, are gases, and bromine is a liquid. Along the staircase line between them lie the metalloids, usually boron, silicon, germanium, arsenic, antimony and tellurium. Their properties are in between: silicon looks metallic but is brittle and only a moderate conductor, which makes it ideal for computer chips.

Main groups and transition metals

Groups 1, 2 and 13 to 18 hold the main-group elements, also called representative elements. Groups 3 to 12 hold the transition metals, including iron, copper, silver and gold; strictly, IUPAC's definition of a transition element leaves out group 12 (zinc, cadmium and mercury), though many tables still colour them as transition metals. The two rows printed below the table are the inner transition metals: the lanthanides in period 6 and the actinides in period 7. Hydrogen is a special case. It usually sits at the top of group 1 but is a nonmetal gas, not an alkali metal, and some tables place it on its own.

Families with names

Several groups have names worth knowing. Group 1, except hydrogen, is the alkali metals: soft, very reactive metals whose simple oxides have the formula \(\text{X}_2\text{O}\), such as \(\text{Na}_2\text{O}\). Group 2 is the alkaline earth metals, whose oxides are XO, such as CaO. Group 15 is the pnictogens, or nitrogen group, and group 16 the chalcogens, or oxygen group. Group 17 is the halogens, reactive nonmetals that form diatomic molecules such as \(\text{Cl}_2\). Group 18 is the noble gases, which are so unreactive that helium, neon and argon form no stable compounds under ordinary conditions. Any group can also be named after its first element, such as the carbon group for group 14.

Worked example: placing an element

Use the table to describe element 38 and to predict its oxide. 1. Find atomic number 38: it is strontium, Sr, in period 5 and group 2. 2. Classify it: it lies at the far left, so it is a metal; group 2 makes it an alkaline earth metal and a main-group element. 3. Predict by analogy: magnesium and calcium above it form MgO and CaO, so strontium should form SrO. 4. Predict its behaviour: like calcium, it should be a reactive, shiny metal that is not found free in nature. 5. Check: strontium's oxide is indeed SrO, and the metal is stored away from air and water because it reacts with both.

Common mistakes to avoid

First, mixing up periods and groups: periods are rows, groups are columns, and it is groups whose members behave alike. Second, thinking the modern table is ordered by atomic mass; it is ordered by atomic number. Third, calling hydrogen an alkali metal because it sits in group 1. Fourth, treating the metalloid line as a sharp wall; properties change gradually across it. Fifth, assuming a whole group is all metals or all nonmetals: group 14 runs from nonmetallic carbon through metalloids silicon and germanium to the metals tin and lead. Sixth, reading a bracketed number as an average atomic mass; it is the mass number of one isotope.

Key takeaways

Mendeleev ordered elements by atomic mass, grouped families in columns and predicted missing elements such as gallium and germanium. Moseley showed the true order is by atomic number, giving the periodic law. The modern table has 118 elements in 7 periods and 18 groups. Metals fill the left and centre, nonmetals the upper right, and metalloids lie along the staircase between. Main-group elements are in groups 1, 2 and 13 to 18; transition metals in groups 3 to 12; lanthanides and actinides below. Named families include the alkali metals, alkaline earth metals, halogens and noble gases.

Flashcards

Flashcard

Mendeleev, 1869

Arranged the elements by atomic mass in a table of families and left gaps for missing ones

Lothar Meyer published a similar table independently in 1870.

Test your understanding

Question 1 of 5

Which two elements would you expect to behave most like sodium?

Question 2 of 5

An element is in period 3 and group 16. Which description fits it?

Question 3 of 5

Why did Mendeleev leave gaps in his table?

Question 4 of 5

Which of these elements is a metalloid?

Question 5 of 5

Magnesium, calcium and strontium form the oxides MgO, CaO and SrO. Barium is in the same group. What is the formula of its oxide?

← Previous topicNext topic →