Chemistry › Section O · Other equilibria › Topic O.1

Precipitation and dissolution

Salts that are called insoluble still dissolve a little, and that little is governed by an equilibrium constant. The solubility product predicts how much of a salt dissolves, whether a precipitate will form when solutions are mixed, and how to keep an unwanted ion out of solution.

When a little is enough

Scale in a kettle, the white crust on a tap and many kidney stones all form because an ionic solid that dissolves only slightly has come out of solution. Such salts are often labelled insoluble, but a better word is sparingly soluble: a tiny amount always dissolves. As the solubility topic showed, a saturated solution in contact with undissolved solid is a dynamic equilibrium, with ions leaving the solid and rejoining it at equal rates. That means everything from the equilibrium chapter applies, including an equilibrium constant, Q, ICE tables and Le Chatelier's principle.

The solubility product, Ksp

For silver chloride the equilibrium is \(\mathrm{AgCl(s) \rightleftharpoons Ag^+(aq) + Cl^-(aq)}\), and its equilibrium constant is the solubility product:

K_{sp} = [\mathrm{Ag^+}][\mathrm{Cl^-}] = 1.8 \times 10^{-10} \text{ at 25 °C}

The solid is left out, as for any pure solid. For a salt with more than one of an ion, each concentration is raised to its coefficient: for lead(II) iodide, \(\mathrm{PbI_2(s) \rightleftharpoons Pb^{2+}(aq) + 2I^-(aq)}\), so \(K_{sp} = [\mathrm{Pb^{2+}}][\mathrm{I^-}]^2 = 9.8 \times 10^{-9}\) at 25 °C. Like every K, Ksp depends on temperature, so tables state it, usually 25 °C.

Molar solubility and Ksp

A salt's molar solubility, s, is the moles of it that dissolve per litre to make a saturated solution. The link between s and Ksp depends on the formula. For a 1 : 1 salt such as AgCl, each mole dissolved gives s of each ion, so \(K_{sp} = s^2\). For a 1 : 2 salt such as PbI₂, it gives s of Pb²⁺ and 2s of I⁻, so \(K_{sp} = s(2s)^2 = 4s^3\). A 2 : 1 salt such as silver chromate, Ag₂CrO₄, also gives \(4s^3\). These simple relations assume the dissolved ions do nothing else, such as react with water or form complexes.

Worked example: solubility from Ksp

How much silver chloride dissolves in 1.00 L of pure water at 25 °C? 1. ICE: let s mol L⁻¹ dissolve; then [Ag⁺] = [Cl⁻] = s. 2. Substitute: \(s^2 = 1.8 \times 10^{-10}\). 3. Solve: \(s = \sqrt{1.8 \times 10^{-10}} = 1.3 \times 10^{-5}\) M. 4. Convert to mass, with M(AgCl) = 143.32 g mol⁻¹: \(1.34 \times 10^{-5} \times 143.32 = 1.9 \times 10^{-3}\) g, about 2 mg per litre. 5. Check: \((1.34 \times 10^{-5})^2 = 1.8 \times 10^{-10}\). Barely visible, but not zero, which is why rinsing a silver chloride precipitate with pure water slowly loses a little of it.

Worked example: Ksp from a measured solubility

A saturated solution of silver chromate at 25 °C holds 0.0216 g of Ag₂CrO₄ per litre. Find Ksp. 1. Molar mass: \(2(107.87) + 52.00 + 4(16.00) = 331.7\) g mol⁻¹. 2. Molar solubility: \(s = \frac{0.0216}{331.7} = 6.51 \times 10^{-5}\) M. 3. Ion concentrations:

\mathrm{Ag_2CrO_4(s) \rightleftharpoons 2Ag^+(aq) + CrO_4^{2-}(aq)}\,,

so [Ag⁺] = 2s = \(1.30 \times 10^{-4}\) M and [CrO₄²⁻] = s = \(6.51 \times 10^{-5}\) M. 4. Substitute: \(K_{sp} = (1.30 \times 10^{-4})^2 \times 6.51 \times 10^{-5} = 1.1 \times 10^{-12}\). 5. Check: \(4s^3\) gives the same value.

Comparing solubilities

A smaller Ksp means a less soluble salt only when the salts produce the same number of ions in the same ratio. Silver chromate's Ksp, \(1.1 \times 10^{-12}\), is far smaller than silver chloride's, \(1.8 \times 10^{-10}\), yet the molar solubilities are \(6.5 \times 10^{-5}\) M for the chromate and \(1.3 \times 10^{-5}\) M for the chloride. The chromate is about five times more soluble, because its Ksp involves a cube rather than a square. To compare salts of different formula types, always work out s for each.

Predicting precipitation: Q versus Ksp

The equilibrium applies to any solution containing the ions, however they got there. Work out Q, the ion product, from the current concentrations in the same form as Ksp. If \(Q > K_{sp}\), the solution holds more than it can at equilibrium, so solid precipitates until Q falls to Ksp. If \(Q < K_{sp}\), no precipitate forms, and more solid could dissolve. If \(Q = K_{sp}\), the solution is exactly saturated. When two solutions are mixed, both are diluted, so find the concentrations in the combined volume before working out Q.

Worked example: mixing two solutions

50.0 mL of 0.0100 M lead(II) nitrate is mixed with 50.0 mL of 0.0100 M potassium iodide at 25 °C. Does lead(II) iodide precipitate? 1. Total volume: 100.0 mL, so each solution is diluted by half. 2. Concentrations after mixing: [Pb²⁺] = \(5.00 \times 10^{-3}\) M and [I⁻] = \(5.00 \times 10^{-3}\) M. 3. Ion product: \(Q = [\mathrm{Pb^{2+}}][\mathrm{I^-}]^2 = (5.00 \times 10^{-3})(5.00 \times 10^{-3})^2 = 1.25 \times 10^{-7}\). 4. Compare: \(1.25 \times 10^{-7} > 9.8 \times 10^{-9}\), so Q > Ksp. 5. Conclusion: yes, bright yellow PbI₂ precipitates until Q falls to Ksp.

Separating ions by selective precipitation

When two dissolved ions both form sparingly soluble salts with the same added ion, the salt whose Ksp is reached at the lower concentration of that ion precipitates first. Take a solution with 0.010 M Cl⁻ and 0.010 M CrO₄²⁻, and add silver nitrate slowly. AgCl starts to form once \([\mathrm{Ag^+}] = \frac{1.8 \times 10^{-10}}{0.010} = 1.8 \times 10^{-8}\) M, but Ag₂CrO₄ needs \([\mathrm{Ag^+}] = \sqrt{\frac{1.1 \times 10^{-12}}{0.010}} = 1.0 \times 10^{-5}\) M. So white AgCl comes out first, and by the time brick-red silver chromate appears, [Cl⁻] has fallen to about \(1.7 \times 10^{-5}\) M: over 99.8% of the chloride is gone. Analysts use this order to measure chloride, and water treatment uses the same idea to remove one ion while others stay dissolved.

The common-ion effect

A salt is less soluble in a solution that already contains one of its ions, a common ion. By Le Chatelier's principle, the extra ion pushes the equilibrium towards the solid. In 0.10 M NaCl, AgCl's ICE table gives [Cl⁻] = 0.10 + s, and because s is tiny this is about 0.10 M. Then \(s = \frac{1.8 \times 10^{-10}}{0.10} = 1.8 \times 10^{-9}\) M, roughly 7,500 times less than in pure water, and s is easily under 5% of 0.10. Water treatment uses the effect: adding an excess of the precipitating ion drives an unwanted metal ion's concentration very low.

Common mistakes to avoid

First, writing the solid in the Ksp expression. Second, forgetting coefficients: for PbI₂ the iodide term is squared, and [I⁻] is 2s, not s. Third, using Ksp alone to compare salts with different formula types. Fourth, forgetting that mixing dilutes both solutions before Q is worked out. Fifth, ignoring a common ion already present, which makes the true solubility far lower. Sixth, quoting a Ksp without its temperature; values change as the temperature changes.

Key takeaways

A sparingly soluble salt sets up an equilibrium between solid and ions, with Ksp equal to the product of the ion concentrations raised to their coefficients; the solid is left out. Molar solubility s links to Ksp through the formula: \(K_{sp} = s^2\) for 1 : 1 salts and \(4s^3\) for 1 : 2 or 2 : 1 salts. Compare solubilities through s, not Ksp, when formulas differ. A precipitate forms when Q > Ksp, using concentrations after mixing; when ions compete for one precipitating ion, the salt whose Ksp is reached first comes out first. A common ion lowers solubility, as Le Chatelier's principle predicts.

Flashcards

Flashcard

Sparingly soluble

Dissolves only very slightly, but never zero

Often loosely called insoluble.

Test your understanding

Question 1 of 5

What is the Ksp expression for calcium phosphate, Ca₃(PO₄)₂(s) ⇌ 3Ca²⁺(aq) + 2PO₄³⁻(aq)?

Question 2 of 5

A salt MX₂ dissolves as MX₂(s) ⇌ M²⁺(aq) + 2X⁻(aq), with Ksp = 4.0 × 10⁻¹² at 25 °C. What is its molar solubility?

Question 3 of 5

Equal volumes of 2.0 × 10⁻⁵ M AgNO₃ and 2.0 × 10⁻⁵ M NaCl are mixed at 25 °C (Ksp of AgCl = 1.8 × 10⁻¹⁰). Does AgCl precipitate?

Question 4 of 5

What is the molar solubility of AgCl in 0.050 M NaCl at 25 °C (Ksp = 1.8 × 10⁻¹⁰)?

Question 5 of 5

At 25 °C, AgCl has Ksp = 1.8 × 10⁻¹⁰ and Ag₂CrO₄ has Ksp = 1.1 × 10⁻¹². Which has the greater molar solubility in pure water?

← Previous topicNext topic →