Differential Equations › Section D · Laplace transforms › Topic D.2
Computing Laplace transforms
Nobody integrates from zero to infinity every time. A short table of basic transforms, plus a handful of rules for sums, exponential factors, factors of t and derivatives, produces almost every transform you will need.
From integrals to a table
The previous topic, The definition of the Laplace transform, computed \(\mathcal{L}\{1\}\), \(\mathcal{L}\{e^{at}\}\), \(\mathcal{L}\{t\}\) and \(\mathcal{L}\{\cos bt\}\) straight from the integral, and the cosine took two rounds of integration by parts. In practice those results are collected in a table, and new transforms are built from old ones with a few general rules. Each rule is proved once, from the definition, and then used freely. The skill this topic builds is recognition: looking at a function, seeing which table entries it is made of, and which rule joins them.
Linearity
Because an integral of a sum is the sum of the integrals, and constants pull out of integrals, the transform is linear:
whatever the constant multipliers \(a\) and \(b\) are. So a sum is transformed term by term, with each constant carried along. Linearity does not extend to products: the transform of \(f(t)g(t)\) is in general not \(F(s)G(s)\). Products need one of the special rules below, or the convolution theorem from a later topic, Convolution integrals.
The basic table
These entries, with their conditions, are worth memorising: \(\mathcal{L}\{1\} = \frac{1}{s}\) for \(s > 0\); \(\mathcal{L}\{t^n\} = \frac{n!}{s^{n+1}}\) for \(n = 0, 1, 2, \dots\) and \(s > 0\); \(\mathcal{L}\{e^{at}\} = \frac{1}{s - a}\) for \(s > a\); and, for \(s > 0\),
For a power that is not a whole number, \(t^p\) with \(p > -1\), the factorial is replaced by the gamma function, \(\Gamma(p + 1)\); for example \(\mathcal{L}\{\sqrt{t}\} = \frac{\sqrt{\pi}}{2s^{3/2}}\).
Hyperbolic functions from linearity
Linearity can produce new entries. Since \(\sinh bt = \frac{1}{2}(e^{bt} - e^{-bt})\), its transform is
for \(s > |b|\). The same steps with a plus sign give \(\mathcal{L}\{\cosh bt\} = \frac{s}{s^2 - b^2}\). These look almost identical to the sine and cosine entries: the only difference is the minus sign in \(s^2 - b^2\). That single sign is a frequent source of error, so check which function you have before reaching for the table.
Worked example: linearity in action
Find the transforms of \(f(t) = 4 - 3t^2 + 5e^{-2t}\) and \(g(t) = 2\cos 3t - 7\sin 3t\). 1. For \(f\), transform each term: \(\frac{4}{s}\), then \(-3 \cdot \frac{2!}{s^3} = -\frac{6}{s^3}\), then \(\frac{5}{s + 2}\) with \(a = -2\). 2. So \(F(s) = \frac{4}{s} - \frac{6}{s^3} + \frac{5}{s + 2}\). 3. For \(g\), with \(b = 3\): \(\frac{2s}{s^2 + 9} - \frac{21}{s^2 + 9}\), which combine over the common denominator. 4. So \(G(s) = \frac{2s - 21}{s^2 + 9}\). Check: the sine term contributes \(7 \cdot 3 = 21\), because sine carries \(b\) on top.
The first shifting theorem
Multiplying a function by \(e^{at}\) shifts its transform:
The proof takes one line. In the definition, \(e^{-st}e^{at} = e^{-(s - a)t}\), so the integral is the transform of \(f\) evaluated at \(s - a\) instead of \(s\). To use it, find \(F(s)\) for the function without the exponential, then replace every \(s\) by \(s - a\). For \(e^{-3t}\), \(a = -3\), so \(s\) becomes \(s + 3\). The rule is how damped oscillations such as \(e^{-t}\cos 2t\) are transformed.
Worked example: shifted transforms
Find \(\mathcal{L}\{e^{-3t}\sin 4t\}\) and \(\mathcal{L}\{t^3e^{2t}\}\). 1. Without the exponential, \(\mathcal{L}\{\sin 4t\} = \frac{4}{s^2 + 16}\). 2. Here \(a = -3\), so replace \(s\) by \(s + 3\): the answer is \(\frac{4}{(s + 3)^2 + 16}\). 3. For the second, \(\mathcal{L}\{t^3\} = \frac{3!}{s^4} = \frac{6}{s^4}\). 4. With \(a = 2\), replace \(s\) by \(s - 2\): the answer is \(\frac{6}{(s - 2)^4}\). Check: the shift moves the condition too. \(\mathcal{L}\{t^3\}\) needs \(s > 0\), so the shifted transform needs \(s - 2 > 0\), that is, \(s > 2\), the condition expected for anything growing like \(e^{2t}\).
Multiplying by t
Differentiating the definition with respect to \(s\) brings down a factor of \(-t\), which gives
For \(t\sin 2t\), start from \(F(s) = \frac{2}{s^2 + 4}\). Its derivative is \(-\frac{4s}{(s^2 + 4)^2}\), so \(\mathcal{L}\{t\sin 2t\} = \frac{4s}{(s^2 + 4)^2}\). As a check, the rule applied to \(te^{5t}\) gives \(-\frac{d}{ds}\frac{1}{s - 5} = \frac{1}{(s - 5)^2}\), the same answer the shifting theorem gives from \(\mathcal{L}\{t\} = \frac{1}{s^2}\). This rule returns in a later topic, Nonconstant coefficient problems.
Transforms of derivatives
Suppose \(f\) is continuous and of exponential order, and \(f'\) is piecewise continuous. Integrating by parts, with \(u = e^{-st}\) and \(dv = f'(t)\,dt\), gives \(\mathcal{L}\{f'\} = sF(s) - f(0)\). Applying this twice, with \(f'\) now continuous and of exponential order too, gives
Differentiation in \(t\) becomes multiplication by \(s\), and the initial values appear on their own. Check with \(f = e^{2t}\): \(f' = 2e^{2t}\) has transform \(\frac{2}{s - 2}\), and \(sF - f(0) = \frac{s}{s - 2} - 1\), which also equals \(\frac{2}{s - 2}\). The topic Solving initial value problems is built on these formulas.
Common mistakes to avoid
Transforming a product factor by factor: \(\mathcal{L}\{t\sin 2t\}\) is not \(\frac{1}{s^2} \cdot \frac{2}{s^2 + 4}\). Forgetting the factorial: \(\mathcal{L}\{t^2\} = \frac{2}{s^3}\), not \(\frac{1}{s^3}\). Shifting the wrong way: \(e^{at}\) replaces \(s\) by \(s - a\), so \(e^{-3t}\) gives \(s + 3\). Shifting only part of the answer: in \(\mathcal{L}\{e^{2t}\cos 3t\}\) the numerator \(s\) must also become \(s - 2\). Mixing up \(\sinh\) and \(\sin\), whose denominators differ in one sign. Dropping \(-f(0)\) from the derivative formula.
Key takeaways
Transforms are linear, so sums are handled term by term, but products are not. Memorise the table for \(1\), \(t^n\), \(e^{at}\), \(\sin bt\), \(\cos bt\), \(\sinh bt\) and \(\cosh bt\). The first shifting theorem, \(\mathcal{L}\{e^{at}f\} = F(s - a)\), handles exponential factors; \(\mathcal{L}\{tf\} = -F'(s)\) handles factors of \(t\). Derivatives transform as \(sF - f(0)\) and \(s^2F - sf(0) - f'(0)\), with the initial values built in.
Flashcards
Flashcard
L{af + bg} = aF(s) + bG(s)
Test your understanding
Question 1 of 5
What is the Laplace transform of 3t² - 4e^(2t)?
Question 2 of 5
What is the Laplace transform of e^(2t) cos 3t?
Question 3 of 5
Using L{t f(t)} = -F′(s), what is the Laplace transform of t cos t?
Question 4 of 5
If y(0) = 2 and y′(0) = -1, what is the transform of y″ in terms of Y(s)?
Question 5 of 5
What is the Laplace transform of 4 sinh 3t?
