Differential Equations › Section C · Second order differential equations › Topic C.8

Nonhomogeneous equations

Once an outside influence such as a driving force or an applied voltage appears, the equation is no longer homogeneous. Its solutions still have a simple structure: the system's own natural behaviour plus any one response to the input.

Adding an input

So far every equation in this section has had zero on the right-hand side, which describes a system left to itself. Push a swing, drive a circuit with a battery or shake a building with wind, and a forcing term appears:

y'' + p(t)y' + q(t)y = g(t)

with \(g\) not identically zero. This is a nonhomogeneous equation. Setting \(g = 0\) gives its associated homogeneous equation, which the earlier topics showed how to solve. This topic explains how the two are related; the next two topics, "Undetermined coefficients" and "Variation of parameters", give methods for the missing piece.

The key fact

Suppose \(Y_1\) and \(Y_2\) are two solutions of the nonhomogeneous equation. Substitute their difference into the left-hand side. Because derivatives respect differences, the result is the left side for \(Y_1\) minus the left side for \(Y_2\), which is \(g(t) - g(t) = 0\). So the difference of any two solutions of the nonhomogeneous equation solves the associated homogeneous equation. If \(y_1\) and \(y_2\) form a fundamental set for that homogeneous equation, as defined in "Fundamental sets and the Wronskian", then

Y_1 - Y_2 = c_1y_1 + c_2y_2

for some constants. Nothing here needs constant coefficients.

The general solution

Fix one particular solution \(y_p\) of the nonhomogeneous equation. By the key fact, any other solution \(y\) differs from it by a homogeneous solution, so

y = y_c + y_p, \qquad y_c = c_1y_1 + c_2y_2

Here \(y_c\) is the complementary solution, sometimes written \(y_h\); it carries the two arbitrary constants. The particular solution \(y_p\) has no arbitrary constants at all. In physical terms, \(y_c\) is the system's natural response and \(y_p\) is one response to the input. Solving a nonhomogeneous equation therefore takes three steps: solve the homogeneous equation, find any one particular solution, and add.

Worked example: a constant input

Solve \(y'' + y' - 2y = 4\) with \(y(0) = 0\) and \(y'(0) = 3\). 1. Homogeneous: \(r^2 + r - 2 = (r + 2)(r - 1)\), so \(y_c = c_1e^t + c_2e^{-2t}\). 2. Particular: a constant \(y_p = A\) has zero derivatives, so \(-2A = 4\) and \(A = -2\). 3. General: \(y = c_1e^t + c_2e^{-2t} - 2\). 4. Conditions: \(c_1 + c_2 - 2 = 0\) and \(c_1 - 2c_2 = 3\). 5. Subtracting gives \(3c_2 = -1\), so \(c_2 = -\frac{1}{3}\) and \(c_1 = \frac{7}{3}\). 6. Answer:

y = \tfrac{7}{3}e^t - \tfrac{1}{3}e^{-2t} - 2

7. Check: \(y(0) = \frac{7}{3} - \frac{1}{3} - 2 = 0\) and \(y'(0) = \frac{7}{3} + \frac{2}{3} = 3\).

Initial conditions go on the whole solution

The constants must be found after \(y_p\) has been added, because the particular solution contributes to both \(y(t_0)\) and \(y'(t_0)\). In the example above, applying the conditions to \(y_c\) alone would give \(c_1 + c_2 = 0\) and \(c_1 - 2c_2 = 3\), so \(c_1 = 1\) and \(c_2 = -1\), and the resulting function \(e^t - e^{-2t} - 2\) starts at \(-2\), not 0. This is one of the most common errors in the whole section, and the habit that prevents it is simple: write the complete general solution first, then differentiate it, then substitute.

Worked example: a linear input

Show that \(y_p = 2t\) solves \(y'' + 4y = 8t\), then solve with \(y(0) = 1\) and \(y'(0) = 0\). 1. Check: \(y_p'' = 0\), so the left side is \(0 + 4(2t) = 8t\). 2. Homogeneous: \(r^2 + 4 = 0\) gives \(r = \pm 2i\), so \(y_c = c_1\cos 2t + c_2\sin 2t\). 3. General: \(y = c_1\cos 2t + c_2\sin 2t + 2t\). 4. \(y(0) = c_1 = 1\). 5. \(y' = -2c_1\sin 2t + 2c_2\cos 2t + 2\), so \(y'(0) = 2c_2 + 2 = 0\) and \(c_2 = -1\). 6. Answer: \(y = \cos 2t - \sin 2t + 2t\). The solution oscillates about the line \(2t\), which is the forced part; the oscillation is the natural part.

Particular solutions are not unique

The word "particular" means one specific solution, not a special one. Adding any homogeneous solution to \(y_p\) gives another valid particular solution. For \(y'' + 4y = 8t\), both \(2t\) and \(2t + 5\sin 2t\) work, because \(5\sin 2t\) contributes zero to the left side. Different choices of \(y_p\) simply shift the values of \(c_1\) and \(c_2\); the final answer to an initial value problem is the same, as uniqueness guarantees. In practice, choose the simplest \(y_p\) you can find, and drop any parts of it that already belong to \(y_c\).

Splitting the input

Inputs often come as sums, and linearity lets them be handled one piece at a time. If \(Y_1\) solves the equation with right side \(g_1\), and \(Y_2\) solves it with right side \(g_2\), then \(Y_1 + Y_2\) solves it with right side \(g_1 + g_2\), and \(kY_1\) handles \(kg_1\). For \(y'' + 4y = 8t + 12\), the piece \(8t\) has \(y_p = 2t\), and the constant 12 has \(y_p = 3\), since \(4 \cdot 3 = 12\). So \(y_p = 2t + 3\). This is superposition for inputs; unlike the homogeneous version, the right-hand sides must add up to the given forcing.

Common mistakes to avoid

First, applying the initial conditions to \(y_c\) before adding \(y_p\). Second, treating a sum of two solutions of the nonhomogeneous equation as a solution of the same equation: it solves the equation with \(2g(t)\) on the right. Third, putting arbitrary constants into \(y_p\); the two constants belong to \(y_c\) only. Fourth, forgetting \(y_c\) altogether and reporting \(y_p\) as the general solution. Fifth, assuming every particular solution must look the same; any two differ by a homogeneous solution.

Key takeaways

A nonhomogeneous equation \(y'' + py' + qy = g\) has the associated homogeneous equation with \(g = 0\). The difference of two nonhomogeneous solutions solves the homogeneous one, so the general solution is \(y = y_c + y_p\): the complementary solution with two constants plus any one particular solution. Fit initial conditions to the full \(y\). Particular solutions are not unique, and a sum of inputs can be handled by adding the particular solutions for each piece.

Flashcards

Flashcard

Nonhomogeneous equation

y″ + p(t)y′ + q(t)y = g(t) with g not zero

g is the forcing or input.

Test your understanding

Question 1 of 5

What is the general solution of y″ − y = 3?

Question 2 of 5

Y₁ and Y₂ both solve y″ + p(t)y′ + q(t)y = g(t). What can be said about Y₁ − Y₂?

Question 3 of 5

Solve y″ + 9y = 18 with y(0) = 0 and y′(0) = 3.

Question 4 of 5

−t solves y″ − y = t, and e^(2t)/3 solves y″ − y = e^(2t). Which function solves y″ − y = 2t − e^(2t)?

Question 5 of 5

y_p = 2t is a particular solution of y″ + 4y = 8t. Which of these is also a particular solution?

← Previous topicNext topic →