Electrical Engineering › Section P · Semiconductor theory, diodes, and transistors › Topic P.2
Electrons, holes, the P-N junction, and junction diodes
A semiconductor carries current two ways: free electrons in the conduction band and holes in the valence band. Put p-type and n-type silicon together in one crystal and the boundary becomes a one-way gate, the P-N junction at the heart of every diode and transistor.
Two kinds of carrier
The topic "Semiconductors" showed that doping silicon with phosphorus gives n-type material and boron gives p-type, and "Quantum physics, crystal structure, and band theory" placed free electrons in the conduction band. This topic follows the carriers: how a missing electron acts as a positive particle, how many of each a doped crystal holds, and what happens where p-type and n-type regions meet in one crystal, the P-N junction that makes a diode conduct one way.
What a hole is
When an electron escapes from a bond, it leaves a vacancy in the valence band. A neighbouring bonded electron can hop into that vacancy, leaving a new one behind it, and the vacancy wanders through the crystal. Tracking the one vacancy is far simpler than tracking every shuffling electron, so we treat it as a particle with charge +q, the hole. Think of a queue with one gap: as each person steps forward into the gap, the gap moves backwards. In an electric field, holes drift towards the negative terminal while valence electrons shuffle the other way, and both motions add to the same conventional current.
Generation, recombination, and mobility
Heat constantly creates electron-hole pairs, called generation. A free electron that meets a hole drops back into the bond, called recombination, releasing the energy as heat or, in some materials, light. In steady conditions the two rates balance. The carriers do not move equally easily. Mobility μ measures drift speed per unit field; in lightly doped silicon \(\mu_n \approx 0.14\) and \(\mu_p \approx 0.045\,\text{m}^2/(\text{V}\,\text{s})\), so electrons are about three times as mobile as holes. With carrier densities n and p, the conductivity is
where \(q = 1.602 \times 10^{-19}\) C.
Majority and minority carriers
In n-type silicon, electrons from the donors far outnumber holes, so electrons are the majority carriers and holes the minority carriers; in p-type the roles swap. Doping also suppresses the minority carrier, because the flood of majority carriers speeds up recombination. In equilibrium the product of the two densities stays fixed:
where \(n_i \approx 1 \times 10^{16}\,\text{m}^{-3}\) is the intrinsic density of silicon at room temperature. Each donor that gives up its electron becomes a fixed positive ion, and each acceptor that captures one becomes a fixed negative ion. The crystal as a whole stays neutral, but those fixed ions matter at a junction.
Worked example: minority carriers
Silicon is doped with \(N_D = 1 \times 10^{22}\) donors per m³, each giving one free electron. Find the hole density. 1. Majority carriers: \(n \approx N_D = 1 \times 10^{22}\,\text{m}^{-3}\), since the intrinsic \(10^{16}\) is negligible beside it. 2. Mass-action law: \(p = n_i^2/n = (10^{16})^2/10^{22} = 1 \times 10^{10}\,\text{m}^{-3}\). 3. Compare: electrons now outnumber holes by \(10^{22}/10^{10} = 10^{12}\). 4. Compare with pure silicon, which had \(10^{16}\) holes: doping cut the hole count a millionfold. 5. Check: \(np = 10^{22} \times 10^{10} = 10^{32} = n_i^2\).
Worked example: resistance of a doped bar
A bar of that n-type silicon is 2.0 mm long with a 0.50 mm × 0.50 mm cross-section. Assume the light-doping mobilities (real ones fall a little). 1. Conductivity: \(\sigma = q n \mu_n = (1.602 \times 10^{-19})(10^{22})(0.14) = 224\) S/m; the holes add nothing measurable. 2. Resistivity: \(\rho = 1/\sigma = 4.46 \times 10^{-3}\,\Omega\,\text{m}\). 3. Area: \(A = 2.5 \times 10^{-7}\,\text{m}^2\), so \(R = \rho L/A = 35.7\,\Omega\). 4. The same bar of pure silicon: \(\sigma = q n_i(\mu_n + \mu_p) = 2.96 \times 10^{-4}\) S/m, giving about 27.0 MΩ. 5. Interpret: one donor per five million atoms cut the resistance about 760,000 times.
Forming the junction
A useful junction needs p-type and n-type regions within one continuous crystal; two pressed blocks fail, because the surface between them breaks the lattice. Near the boundary, electrons diffuse into the p side and holes into the n side, recombining as they meet. That leaves a thin depletion region with no mobile carriers, only fixed ions: positive donors on the n side, negative acceptors on the p side. Their field, pointing from n to p, pushes back further diffusion, creating a built-in barrier of roughly 0.6 to 0.8 V in silicon, less in germanium. A voltmeter cannot read it across a loose diode, because contact potentials at the leads cancel it.
Forward and reverse bias
Forward bias makes the p side positive relative to the n side. The applied voltage opposes the built-in barrier, so the depletion region narrows; as the voltage approaches about 0.6 to 0.7 V in silicon, majority carriers pour across and recombine, and current rises steeply. Reverse bias makes the p side negative. It pulls carriers away from the junction, so the depletion region widens and the barrier grows. Only a tiny leakage current flows, carried by thermally generated minority carriers plus some surface leakage: typically nanoamperes in a small silicon diode, rising with temperature. Germanium junctions leak orders of magnitude more, one reason they have faded from use.
The junction diode and its curve
The diode symbol is a triangle, the anode or p side, pointing at a bar, the cathode or n side; a stripe on the package marks the cathode. Conventional current flows from anode to cathode, the way the triangle points. Electrons drift the other way, but as "Atoms, current, and voltage" set out, this course always states conventional current. The current-voltage curve shows almost no forward current below about 0.5 V, a knee near 0.6 to 0.7 V, then a steep rise. In reverse there is only tiny leakage until breakdown, where current surges and destroys an ordinary diode unless limited, so rectifiers carry reverse ratings from tens of volts to over 1000 V.
Inside real diodes, and before them
A real silicon diode is more than two layers. Heavily doped P+ and N+ regions at the contacts keep series resistance low, while a lightly doped N− layer beside the junction lets the depletion region spread wide, giving the high breakdown voltage power rectifiers need. Heavy doping on both sides does the opposite, a thin depletion region and a low breakdown voltage with more leakage, which is how Zener diodes are made. Diodes predate junctions: Ferdinand Braun reported rectification at a metal-crystal point contact in 1874, early radios used a fine "cat's whisker" wire on a galena crystal, and silicon point-contact detectors served in Second World War radar.
Common mistakes to avoid
First, thinking holes are a separate kind of particle; a hole is a missing valence electron, though it behaves as a +q carrier. Second, assuming doping adds majority carriers while leaving minority carriers unchanged; \(np = n_i^2\) means minority carriers fall. Third, imagining that pressing two doped blocks together makes a junction; it must be one crystal. Fourth, describing the depletion region as charge-free; it has no mobile carriers but is full of fixed ions. Fifth, reading the diode arrow as the electron direction; it shows conventional current, anode to cathode.
Key takeaways
A hole is a vacancy in the valence band that moves like a positive carrier; electrons move in the conduction band, about three times as freely as holes in silicon, and σ = q(nμₙ + pμₚ). Doping makes one carrier the majority, and np = nᵢ² pushes the minority carrier down. At a P-N junction, diffusion leaves a depletion region of fixed ions and a built-in barrier of roughly 0.6 to 0.8 V in silicon. Forward bias (anode positive) narrows it and current rises steeply past about 0.6 to 0.7 V; reverse bias widens it, leaving tiny leakage until breakdown. Doping levels set the breakdown voltage.
Flashcards
Flashcard
A vacancy in the valence band that moves like a +q carrier
Test your understanding
Question 1 of 5
Silicon (nᵢ = 1 × 10¹⁶ m⁻³) is doped with 2 × 10²¹ donors per m³. What is the hole density?
Question 2 of 5
A P-N junction is reverse biased. What happens to its depletion region?
Question 3 of 5
In p-type silicon, an electric field makes holes drift towards the negative terminal. What are the valence electrons doing?
Question 4 of 5
Why must a useful P-N junction be made within one continuous crystal?
Question 5 of 5
In which direction does conventional current flow through a forward-biased diode?
