Microeconomics › Section G · Production, costs, and industry structure › Topic G.3

Costs in the short run

Every cost curve the course will use grows from one physical fact: in the short run something is fixed. The fixed cost gets spread thinner as output grows, and the variable cost climbs as the fixed input congests. The tug between those two forces draws the U-shaped cost curves.

From production to costs

The previous topic followed output as workers were added to a fixed kitchen. Costs are the same story with price tags attached: each worker has a wage, each pizza its dough. When marginal product was high - the early workers, specialising freely - output per hire was cheap; when marginal product fell - the sixth worker queuing for the oven - output per hire turned dear. So the shapes of cost curves are inherited from the production function, and this topic translates the physics into dollars.

Fixed and variable costs

In the short run, costs split by whether output moves them. Fixed costs (FC) do not vary with output: rent, insurance, equipment leases - payable in full even if the firm produces nothing. Variable costs (VC) rise with output: ingredients, hourly wages, energy, packaging. Total cost is their sum: \(TC = FC + VC\). A caution on vocabulary: fixed is not sunk. A year's lease is fixed for its term but avoidable when it ends; a sunk cost, as the topic on explicit and implicit costs showed, is gone whatever happens.

Three averages from one total

Total cost yields three per-unit measures. Average total cost: \(ATC = TC/Q\) - the cost per unit, the number a firm most wants low. Average variable cost: \(AVC = VC/Q\). Average fixed cost: \(AFC = FC/Q\). Because ATC is the sum of the two averages, the tug-of-war inside it can be watched directly: \(ATC = AFC + AVC\). Fixed costs never change with output, so AFC falls without limit as output grows - the overhead spreads over more units - a force pushing ATC down. Variable costs rise with congestion - a force pushing ATC up.

Marginal cost

Marginal cost (MC) is the cost of one more unit: the change in total cost per unit of extra output, \(MC = \Delta TC \div \Delta Q\). It is the production function's marginal product, flipped: when the next worker adds many pizzas, the pizzas' marginal cost is low; when the next worker adds few, it is high - the law of diminishing marginal returns, now wearing a price tag. Marginal cost is the number the profit rule will use when the firm chooses output: every future supply decision compares the price of one more unit with exactly this figure.

Why the curves have their shapes

Put the forces together and the classic shapes appear. AFC declines continuously - overhead per unit halves whenever output doubles. AVC is usually U-shaped: falling while specialisation makes each hire productive, then rising as diminishing returns bite. ATC, the sum, is U-shaped too: pulled down early by the spreading of fixed costs, dragged up late by congestion. MC darts beneath the averages while it is low, then crosses them - and the crossing points have a logic worth one whole card.

Worked example: a print shop's cost table

A print shop has fixed costs of $60 a day (equipment lease and insurance). Marginal costs per hundred flyers for outputs one to four: \(40, 30, 50, 90\) dollars. 1. Variable cost is the running sum: \(40, 70, 120, 210\). 2. Total cost adds the fixed: \(100, 130, 180, 270\). 3. ATC: \(100, 65, 60, 67.5\) - U-shaped, bottoming at output 3. 4. AFC: \(60, 30, 20, 15\) - halving as output doubles, spreading the lease. 5. AVC: \(40, 35, 40, 52.5\) - dips while the press team specialises, then rises as diminishing returns arrive. 6. Check the sums: \(AFC + AVC\) at output 3 is \(20 + 40 = 60\), matching ATC. Assumptions: fixed $60 truly fixed this quarter; marginal costs as given.

Marginal cost and the averages: the grade-point rule

Marginal cost meets the averages under the same arithmetic as a test score meeting your grade average: a mark below the average pulls it down; a mark above pushes it up. While MC is below ATC, each new unit costs less than the running average, so ATC falls. Once MC is above ATC, new units cost more than the average, and ATC rises. Conclusion: MC crosses ATC exactly at ATC's minimum point - the efficient scale, where cost per unit is as low as the firm's technology allows. The same rule holds for AVC, which MC crosses at its minimum too, slightly earlier. No accounting trick - just averaging.

Worked example: finding the efficient scale

Read the print shop's table for its best operating point. 1. Scan ATC: \(100, 65, 60, 67.5\) - the minimum is $60 at output 3, so three hundred flyers per day is the efficient scale. 2. Check MC against ATC around the minimum: at output 3, MC is 50 - below ATC, so ATC fell (from 65 to 60) as output rose to 3. 3. At output 4, MC is 90 - above ATC of 67.5, so the average has turned upward. 4. Conclusion: MC crosses ATC between outputs 3 and 4 - exactly at the bottom of the U, as the grade-point rule demands (with whole-number outputs the crossing shows up between rows). 5. Bonus: AVC bottoms at output 2 (35) with MC crossing it between 2 and 3 - earlier than ATC, because fixed-cost spreading holds ATC down a little longer. Assumptions: the discrete table approximates the smooth curves.

Cost curves are the supply story's first half

Hold the shapes in view, because the firm's entire output decision - a few topics ahead - is built on them. The profit rule will say: produce while price covers marginal cost. So a competitive firm's supply curve is its marginal cost curve above the point where MC crosses AVC. The minimum of AVC marks the shutdown boundary: below that price, revenue cannot even cover variable costs, so producing loses more than closing. The minimum of ATC, the efficient scale, marks the zero-economic-profit price that competitive markets gravitate toward in the long run. These two points carry much of the story of section H.

Common mistakes to avoid

First, calling fixed costs sunk: a lease is fixed for its term and avoidable after it; sunk money is unrecoverable, period. Second, expecting AFC to flatten into a U: it falls forever, and only the AFC-plus-AVC sum makes a U. Third, hunting for the MC-ATC crossing at the wrong point - it is at the MINIMUM of ATC, by the grade-point rule, not at AVC's minimum or the origin. Fourth, reading ATC where the decision needs MC: whether to serve one more customer depends on the margin, not the average. Fifth, forgetting the assumptions: fixed costs fixed only in the short run, technique constant, input prices given.

Key takeaways

Short-run costs inherit the production function: fixed costs (FC) hold steady while variable costs (VC) rise with output, and \(TC = FC + VC\). The averages are \(ATC = AFC + AVC\): fixed spreading pulls ATC down early, congestion pushes it up late - the U-shape (print shop: ATC 100, 65, 60, 67.5, minimum $60 at output 3). Marginal cost is the price tag on diminishing returns (MC 40, 30, 50, 90), and it crosses both AVC and ATC at their minimums by the grade-point rule - the crossing sits between outputs 3 and 4, at the efficient scale. Ahead: the supply curve is MC above AVC's minimum, the shutdown rule lives there, and the efficient scale sets the long-run zero-profit benchmark.

Flashcards

Flashcard

Fixed costs

Costs that do not vary with output: rent, leases, insurance

Payable even at zero output.

Test your understanding

Question 1 of 5

A print shop has fixed costs of $60 a day and marginal costs of 40, 30, 50 and 90 dollars for outputs one to four. What is total cost at output 3?

Question 2 of 5

The print shop's ATC values are 100, 65, 60 and 67.5 dollars across outputs one to four. Where is its efficient scale?

Question 3 of 5

The print shop's ATC at output 2 is $65, and the third hundred flyers has an MC of $50. What happens to ATC as output rises to 3?

Question 4 of 5

Why does average fixed cost never rise as output grows?

Question 5 of 5

For a competitive firm, how is the marginal cost curve related to its short-run supply curve?

← Previous topicNext topic →