Computer Networking › Section G · Wireless and mobile networks › Topic G.3
Bluetooth and personal area networks
Earbuds, watches, keyboards and door sensors need links that are short, cheap and frugal with battery rather than fast. Bluetooth and a family of low-power radios fill that niche, using many of the link-layer ideas met earlier in this course.
Networks the size of a person
A wireless personal area network (WPAN) covers a few metres around one person or room, a PAN in the sense of the Computer Science topic "Network fundamentals". Its goals differ from Wi-Fi's: low cost, low power and freedom from cables matter more than speed. Bluetooth is the best-known example. It began in the late 1990s, was once standardised by the IEEE as 802.15.1, and is now developed solely by the Bluetooth Special Interest Group (SIG). It comes in two radio systems that share the 2.4 GHz band: Bluetooth Classic, for continuous streams such as audio, and Bluetooth Low Energy (LE), introduced with version 4.0 in 2010 for small battery-powered devices.
Classic Bluetooth: hopping to dodge interference
The unlicensed 2.4 GHz band is crowded with Wi-Fi, microwave ovens and cordless gadgets, so Classic Bluetooth spreads its risk. It divides the band into 79 channels, each 1 MHz wide, and time into 625 µs slots. Slot by slot, the transmission hops through the channels in a pseudo-random sequence that both ends know: frequency-hopping spread spectrum. A burst of interference therefore spoils only the few slots that land on busy channels, and lost packets are resent. Adaptive frequency hopping goes further, dropping channels that are persistently busy, such as those under a nearby Wi-Fi network. Classic data rates are 1, 2 or 3 Mbit/s.
The piconet: one device sets the rhythm
Classic Bluetooth devices organise themselves into a piconet with no access point: one central device and up to seven active peripherals. (Older documents say master and slave; current specifications use central and peripheral.) The central device rules the piconet. Its clock defines slot boundaries, its address fixes the hopping sequence, and it decides who may transmit by polling. The central sends in one slot and the polled peripheral may reply in the next, so peripherals never contend for the channel and never collide with each other. A device may belong to several piconets in turn, linking them into a larger scatternet.
Discovering and joining
Because a new device does not yet know any hopping pattern, joining takes two phases. In inquiry, a device looking for neighbours sends short inquiry messages across many channels in turn, while discoverable devices listen and reply after a random delay, so that replies from several devices are unlikely to collide. Each reply carries the responder's address. In paging, the would-be central contacts one chosen device by address, again across several channels, and gives it the hopping sequence and clock timing. From then on both hop in step. Pairing, which creates shared keys so later connections are encrypted, is a separate security step.
Worked example: sharing slots by polling
A phone is the central device for three peripherals, each with data waiting. Each exchange uses one central slot and one reply slot, and each single-slot packet carries 27 bytes of user data. What can each peripheral send? 1. Slot time is 625 µs, so the channel hops 1 ÷ 0.000625 = 1,600 times per second. 2. One polling round visits 3 peripherals × 2 slots = 6 slots, or 3.75 ms. 3. Each peripheral replies once per round: 1 ÷ 0.00375 ≈ 267 packets per second. 4. Rate: 267 × 27 × 8 ≈ 57.6 kbit/s each. Check: with only one peripheral the round is 2 slots and the rate triples to 172.8 kbit/s.
Bluetooth Low Energy
Bluetooth LE is a separate radio design built around sleeping. It uses 40 channels, each 2 MHz wide. Three of them are advertising channels, placed to avoid Wi-Fi channels 1, 6 and 11, where devices broadcast short packets announcing themselves; scanners such as phones listen there. A connection then hops across the other 37 data channels. The key idea is the connection interval: the two sides agree to meet, for example, once a second, exchange a few packets in a millisecond or two, and sleep in between. LE offers a 1 Mbit/s PHY, a 2 Mbit/s PHY added in Bluetooth 5 (2016), and a Coded PHY that trades rate, 500 or 125 kbit/s, for longer range.
Worked example: a sensor on a coin cell
A temperature sensor wakes once per second, uses 6 mA for 2 ms to send its reading, and sleeps at 2 µA otherwise. It runs on a coin cell of about 225 mAh. Assuming the battery delivers its full rating, how long does it last? 1. Active share: 2 ms of each 1,000 ms, a fraction 0.002. 2. Average current: 0.002 × 6 mA + 0.998 × 0.002 mA ≈ 0.012 + 0.002 = 0.014 mA, or 14 µA. 3. Lifetime: 225 ÷ 0.014 ≈ 16,100 hours. 4. In years: 16,100 ÷ 8,760 ≈ 1.8 years. Check: waking ten times a second raises the average to about 122 µA and cuts the life to about 77 days, so the duty cycle matters most.
Bluetooth today
Bluetooth is revised often, and the SIG has moved to roughly two core specification releases a year. As of 2026 the main milestones are: Bluetooth 5 (2016), which added the faster 2M and long-range Coded PHYs; LE Audio, with a more efficient codec and broadcast audio that lets many listeners join one stream, marketed as Auracast; Bluetooth 6.0 (September 2024), whose Channel Sounding lets two devices measure the distance between them accurately, for item finders and digital keys; then 6.1 and 6.2 in 2025 and 6.3 in May 2026, refining privacy, latency, power use and ranging. Bluetooth LE also supports broadcast beacons and a mesh mode for building controls, as well as the point-to-point links of a piconet.
Other low-power networks
Several other radios target the Internet of Things. IEEE 802.15.4 defines a low-rate radio, 250 kbit/s at 2.4 GHz, used by Zigbee and by Thread, which forms self-healing mesh networks where battery devices relay through powered ones; Thread carries IPv6, and the Matter smart-home standard runs over Thread, Wi-Fi or Ethernet. For kilometres rather than metres, LoRaWAN sends tiny messages at very low rates in unlicensed sub-gigahertz bands, suiting farm and city sensors. NB-IoT and LTE-M are 3GPP cellular variants for meters and trackers, using licensed spectrum and an operator's network.
Common mistakes to avoid
First, assuming Bluetooth LE is just a slower Classic Bluetooth: it is a different radio system built around advertising and sleeping. Second, saying a piconet needs an access point; the central device coordinates it. Third, thinking peripherals contend like Wi-Fi stations, when the central polls them. Fourth, ignoring the sleep current or the duty cycle in battery estimates. Fifth, treating IEEE 802.15.1 as the current Bluetooth standard; the Bluetooth SIG now maintains it. Sixth, choosing a radio by top speed when range and battery life decide most IoT designs.
Key takeaways
WPANs trade speed for low cost and power. Classic Bluetooth hops among 79 channels of 1 MHz in 625 µs slots, 1,600 hops a second, at 1 to 3 Mbit/s. A piconet has one central device and up to seven active peripherals; the central sets the clock and hopping and polls each peripheral. Inquiry finds devices and paging connects them. Bluetooth LE uses 40 channels of 2 MHz, three for advertising, and sleeps between connection events; average current is set by the duty cycle. Bluetooth 6.0 (2024) added Channel Sounding. Zigbee and Thread mesh over 802.15.4; LoRaWAN, NB-IoT and LTE-M reach further.
Flashcards
Flashcard
Wireless personal area network covering a few metres
Test your understanding
Question 1 of 5
Classic Bluetooth uses 625 µs time slots and changes channel every slot. How many hops does it make per second?
Question 2 of 5
What is the largest number of active peripherals one central device can have in a Classic Bluetooth piconet?
Question 3 of 5
A Bluetooth LE tag wakes for 4 ms every 2 s, drawing 5 mA when awake and 1 µA asleep. What is its average current?
Question 4 of 5
A farm needs soil sensors spread over several kilometres to send a few bytes an hour for years, without a cellular contract. Which technology fits best?
Question 5 of 5
What does the Bluetooth LE Coded PHY trade away, and what does it gain?
