Computer Networking › Section A · Computer networks and the internet › Topic A.2
The network edge: hosts and access networks
Before a packet can cross the internet it has to leave your device and reach a first router. That first stretch, over a phone line, a cable, a fibre, Wi-Fi or a cellular signal, often decides how fast the whole connection feels.
Hosts and their access networks
The edge of the internet is where the hosts are: the devices people use, and the servers that answer them, most of which now sit in large data centres. An access network physically connects a host to its edge router, the first router on any path from that host to a distant one. There are three broad settings. At home, a household reaches its ISP over a telephone line, a cable-television line, a fibre or a fixed wireless link. On a campus or in an office, hosts join a local area network (LAN) of Ethernet and Wi-Fi. On the move, phones use cellular networks.
DSL over the telephone line
Digital subscriber line (DSL) reuses the copper telephone line, so the phone company is also the ISP. A DSL modem in the home turns data into high-frequency signals; at the provider's local central office, a DSL access multiplexer (DSLAM) collects the lines of many homes and passes the data into the internet. One line carries three channels at once on different frequency bands: ordinary voice in the lowest band, up to about 4 kHz, then an upstream data band and a wider downstream band. DSL is asymmetric, faster down than up, and its rate falls as the distance to the central office grows.
Cable: hybrid fibre-coax
Cable access reuses the cable-television network. Fibre runs from the cable company's head end to neighbourhood nodes, and coaxial cable runs from each node to the homes it serves, so the system is called hybrid fibre-coax (HFC). Each home has a cable modem, and the head end's CMTS (cable modem termination system) does the job a DSLAM does for DSL, under standards called DOCSIS. The key property is that cable is a shared broadcast medium: every downstream packet reaches every home on the segment, and all homes share the upstream channel, so each user's speed depends on how busy the neighbours are.
Fibre to the home and fixed wireless
Fibre to the home (FTTH) runs optical fibre all the way to the house and can deliver gigabit rates. Most deployments use a passive optical network (PON): an optical line terminal (OLT) in the central office feeds one fibre to a passive splitter near a group of homes, and each home has an optical network terminal (ONT) linked to the splitter by its own fibre. Like cable, the shared fibre carries every home's downstream traffic. A newer option avoids digging altogether: fixed wireless access, often over 5G, beams data from a provider's base station to a receiver at the home, which then feeds a Wi-Fi router.
Worked example: asymmetric access
A household's plan offers 300 Mbps down and 20 Mbps up. Someone uploads a 600 MB video and later downloads a file of the same size. 1. Size in bits: \(600 \times 10^6 \times 8 = 4.8 \times 10^9\) bits. 2. Upload time at best: \(\frac{4.8 \times 10^9}{20 \times 10^6} = 240\) s, or 4 minutes. 3. Download time at best: \(\frac{4.8 \times 10^9}{300 \times 10^6} = 16\) s. 4. On a shared cable segment where 40 homes download at once from a 1 Gbps downstream channel, each would get about \(1000 \div 40 = 25\) Mbps. Check: the upload takes 15 times as long, the ratio of the two rates, 300 to 20.
Ethernet and Wi-Fi in the LAN
In offices, universities and many homes, hosts join a LAN. With Ethernet, each host runs a twisted-pair copper cable to a port on an Ethernet switch, and the switches connect to the organisation's router; host links commonly run at 1 Gbps, servers' at 10 Gbps or more. With Wi-Fi, defined by the IEEE 802.11 standards, a host exchanges packets by radio with an access point wired into the LAN, within a few tens of metres of it. A typical home box combines a router, a small Ethernet switch and a Wi-Fi access point.
Wide-area wireless: cellular access
Phones use the cellular network, the same infrastructure that carries mobile calls. A phone sends and receives packets through a base station run by the mobile operator, and it can be several kilometres away, compared with the tens of metres Wi-Fi allows. Fourth-generation (4G, LTE) and fifth-generation (5G) networks are now the main mobile access technologies, standardised by 3GPP, and a phone that moves is handed from one base station to the next. The topic Cellular networks: 4G and 5G explains how they work.
Guided physical media
Every link sends bits as electromagnetic waves or light across a physical medium. Guided media keep the signal inside a solid path. Twisted-pair copper, two insulated wires twisted to reduce interference, is the cheapest and most common; category 6a cable carries 10 Gbps Ethernet up to 100 metres. Coaxial cable has a central conductor inside a shield and carries cable television and HFC broadband. Optical fibre carries pulses of light, loses little signal over long distances and is immune to electrical interference, so it forms long-haul and undersea links.
Unguided media: radio and satellite
Unguided media send waves through the air or space. Terrestrial radio needs no cable and passes through walls, but its signal weakens with distance, reflects off objects and suffers interference. It ranges from very short links, such as Bluetooth, to local ones such as Wi-Fi and wide-area ones such as cellular. Satellites relay radio signals from orbit. A geostationary satellite, about 35,800 km up, stays over one spot but adds a large delay. Low-Earth-orbit satellites, a few hundred to about 2,000 km up, move across the sky, so large constellations hand users from satellite to satellite, and the delay is far smaller.
Worked example: why geostationary links feel slow
Compare a geostationary satellite at 35,800 km with a low-Earth-orbit one at 550 km, both directly overhead, with radio at about \(3 \times 10^8\) m/s. 1. Geostationary, ground to satellite to ground: \(\frac{2 \times 35.8 \times 10^6}{3 \times 10^8} = 0.239\) s. 2. A request and its reply each make that trip, about 0.477 s, nearly half a second. 3. Low orbit, ground to satellite to ground: \(\frac{2 \times 550 \times 10^3}{3 \times 10^8} = 0.0037\) s, or 3.7 ms. 4. Request and reply: about 7.3 ms. Check: the altitude ratio, \(35{,}800 \div 550 \approx 65\), matches the delay ratio. The topic Delay, loss, and throughput treats such delays fully.
Common mistakes to avoid
First, calling the whole path the access network: it ends at the edge router. Second, expecting a cable or PON connection to deliver its full advertised rate at busy times; the medium is shared. Third, forgetting asymmetry, then being surprised when uploads crawl. Fourth, confusing Wi-Fi with the internet connection itself: Wi-Fi is the local radio link to an access point, and the broadband line behind it may be the real limit. Fifth, assuming radio waves are slow; geostationary delay comes from distance, not speed. Sixth, dividing a size in megabytes by a rate in megabits without converting.
Key takeaways
Hosts at the edge run applications; most servers sit in data centres. An access network connects a host to its edge router. Home access uses DSL over phone lines, hybrid fibre-coax cable, fibre to the home (usually PON) or fixed wireless; cable and PON share a medium among neighbours, and most home access is asymmetric. LANs use Ethernet switches over twisted pair and Wi-Fi access points within tens of metres. Cellular 4G and 5G cover kilometres. Media are guided (twisted pair, coax, fibre) or unguided (radio, satellite). Geostationary satellites add roughly half a second per request and reply; low-orbit ones far less.
Flashcards
Flashcard
Connects a host to its edge router
Test your understanding
Question 1 of 5
A plan offers 200 Mbps down and 10 Mbps up. At best, how long does uploading a 250 MB file take?
Question 2 of 5
Why can a cable-broadband user's download speed drop in the evening even though the plan's rate never changes?
Question 3 of 5
Where does a host's access network end?
Question 4 of 5
Which statement about physical media is correct?
Question 5 of 5
Signals travel at about 3 × 10⁸ m/s. Roughly how long does a geostationary satellite, about 35,800 km up and overhead, take to relay a signal from one ground station to another?
