Physics › Section C · Forces and Newton's laws › Topic C.1
Force and Newton's first law
Why does a rolling ball eventually stop, while a space probe keeps coasting for decades? Newton's first law answers both: motion itself needs no force, but every change in motion does.
What a force is
Kinematics, in Section B, described how motion changes. Dynamics asks why, and the answer is force. A force is a push or a pull that one object exerts on another because the two interact, so every force has a source and a target: Earth pulls the apple, the hand pushes the door. A force has a size and a direction, so it is a vector, and forces combine by the same rules you used for adding displacements. Its SI unit is the newton, N, which the next topic defines exactly.
Kinds of force and how to measure them
Contact forces act only where objects touch: the push of a floor, the pull of a rope, friction and air resistance. Non-contact forces act across empty space: gravity, and the electric and magnetic forces. At the atomic scale, even contact forces are electromagnetic in origin. To measure a force, compare it with a standard. Within its working range, a spring stretches in proportion to the pull on it, so two identical objects hung from a spring scale stretch it twice as far as one.
Adding forces: the net force
Most objects feel several forces at once, and what decides their motion is the net force: the vector sum of every force that outside objects exert on the object. Forces along one line add with signs, so a 30 N push to the right and a 10 N drag to the left give a net 20 N to the right. Two forces at right angles combine like the sides of a right triangle:
with the direction given by \(\tan\theta = F_y / F_x\). Forces at other angles are first split into x- and y-components.
Free-body diagrams
A free-body diagram is a sketch of one object and every force acting on it. Draw the object as a dot. For each force, draw a labelled arrow that starts at the dot, points the way the force acts, and has a length roughly in proportion to its size. Include only forces exerted on the object by other things, never forces the object exerts, and never draw velocity as if it were a force. For a mug resting on a desk, there are two arrows of equal length: the mug's weight pointing down and the desk's push pointing up.
Worked example: two ropes on a sledge
Two children pull a sledge across flat, frictionless ice, one with 48.0 N due east and the other with 20.0 N due north. Find the net force. 1. The sledge neither rises nor sinks, so its weight and the ice's upward push balance, and only the two pulls matter. 2. The pulls are at right angles, so
3. Direction: \(\tan\theta = 20.0 / 48.0\), so \(\theta = 22.6^\circ\) north of east. 4. Check: the result exceeds either pull but is less than their sum, 68.0 N, and leans towards the larger pull.
Newton's first law
Newton's first law says that an object stays at rest, or keeps moving at constant velocity in a straight line, unless a net external force acts on it. Two words do the work. "Net" means forces may act, as long as they balance. "Velocity" includes direction, so turning a corner at steady speed is a change in motion that needs a net force, just as speeding up or slowing down does. With zero net force, the object is in equilibrium: at rest or at constant velocity. When a bus brakes hard, its passengers lurch forwards because their bodies keep moving; the seat belt supplies the force that slows them.
From Aristotle to Galileo
For about two thousand years the dominant view, from Aristotle, was that moving things naturally come to rest and keep moving only while pushed. In the early 1600s Galileo rolled balls along ramps and found that the smoother the surface, the farther they travelled. He reasoned that with no friction at all, a ball on a level track would roll forever, so slowing down has a cause, friction. A puck on freshly smoothed ice shows this, gliding a long way. Newton made the idea his first law in the Principia of 1687.
Inertia and mass
The first law is also called the law of inertia. Inertia is an object's resistance to any change in its velocity, and mass measures it: the more mass, the harder an object is to start, stop or turn. A loaded truck takes far more effort to get rolling than a shopping trolley. Mass is measured in kilograms and, unlike weight, does not depend on location: an astronaut has the same mass on Earth, in orbit and on the Moon. Since 2019 the kilogram has been defined by fixing the value of the Planck constant. Weight is a force, as the next topic explains.
Inertial frames of reference
Motion is always measured from some viewpoint, a frame of reference. Newton's laws hold in their simple form only in an inertial frame, one that is not accelerating. The ground is very nearly inertial, and every problem in this section is solved from it. Judged from an accelerating or rotating frame, objects seem to feel pushes that nothing exerts, called fictitious forces; Section D gives them a topic of their own.
Worked example: is the net force zero?
Decide whether each object has a net force on it. 1. A lift rising at a steady 2.0 m/s: its velocity is constant in size and direction, so the net force is zero; the upward pull balances the weight. 2. A cyclist rounding a bend at a steady 6.0 m/s: the direction changes, so there is a net force, towards the inside of the bend. 3. A ball thrown straight up, at the instant it is at rest at the top: its velocity is still changing, so the net force is its weight, pointing down. 4. A skydiver falling at a constant 55 m/s: zero, as air resistance balances the weight.
Common mistakes to avoid
First, thinking that motion needs a force: constant velocity needs no net force, and only a change in velocity does. Second, reading "no net force" as "no forces": a parked car has its weight and the road's push acting on it, balanced. Third, forgetting that a change of direction is a change of velocity. Fourth, putting forces the object exerts into its own free-body diagram, or adding a "force of motion" along its path. Fifth, treating inertia as a force: it is a property, measured by mass. Sixth, confusing mass with weight.
Key takeaways
A force is a push or pull from an interaction between two objects; it is a vector, measured in newtons. The net force is the vector sum of the external forces on an object, and a free-body diagram shows each of them. Newton's first law: with zero net force, an object stays at rest or moves at constant velocity, and any change in speed or direction needs a net force. Mass, in kilograms, measures inertia and does not change with location. Newton's laws hold in their simple form in inertial, non-accelerating frames.
Flashcards
Flashcard
A push or pull that one object exerts on another
Test your understanding
Question 1 of 5
A box on frictionless ice is pulled by two horizontal ropes, one with 12.0 N due east and one with 9.0 N due north. What is the size of the net force on the box?
Question 2 of 5
A puck slides at 4.0 m/s across perfectly frictionless, level ice. What happens to it next?
Question 3 of 5
Which of these objects has a net force of zero acting on it?
Question 4 of 5
An astronaut has a mass of 80 kg on Earth. What is her mass on the Moon, where gravity is about one-sixth as strong?
Question 5 of 5
A book rests on a table. Which forces belong on the book's free-body diagram?
