Physics › Section I · Temperature, gases, and heat › Topic I.7
Conduction, convection, and radiation
Heat always flows from hotter to colder, but it can travel in three quite different ways. Knowing which one dominates tells you how to insulate a house, keep a drink cold or estimate how much warmth a stove gives a room.
Three ways heat travels
Wherever there is a temperature difference, heat flows, by one or more of three methods. Conduction passes energy through matter that stays in place, from particle to particle. Convection carries energy with a moving fluid, as warm air or water flows from one place to another. Radiation carries energy as electromagnetic waves, which need no material at all. Sit beside a campfire and you meet all three: radiation warms your face, convection carries hot air and smoke upwards, and conduction slowly warms the ground beneath the fire. Every heat-transfer problem starts by asking which methods matter most.
Conduction: passing energy along
In a solid, the particles at the hot end vibrate more vigorously and jostle their neighbours, passing energy along without any bulk movement. In metals, free electrons carry energy too, which is why good electrical conductors such as copper and aluminium are also good thermal conductors, while wood, plastic and air are poor ones. On a frosty morning a metal railing and a wooden bench are at the same temperature, yet the railing feels much colder. It conducts heat away from your hand far faster, and your skin senses the rate of heat loss, not the temperature of the object.
The conduction equation
For steady conduction through a slab of area \(A\) and thickness \(d\), with faces held at temperatures differing by \(\Delta T\), the rate of heat flow is
measured in watts. A larger area or temperature difference raises the rate; a thicker slab lowers it. The thermal conductivity \(k\) is a property of the material, in W/(m·°C), the same as W/(m·K). Approximate values: copper 400, aluminium 240, steel 50, glass 0.9, water 0.6, wood 0.1 to 0.2, fibreglass or wool 0.04, polystyrene foam 0.03 and still air 0.026. Metals conduct thousands of times better than insulators.
Worked example: heat through a wall
A 12.0 m² section of house wall contains fibreglass insulation 9.00 cm thick (k = 0.040 W/(m·°C)). Its inner face is at 20.0 °C and its outer face at −5.0 °C. Ignore the wooden studs and the thin layers of board. 1. Convert: d = 0.0900 m, and \(\Delta T = 25.0\) °C. 2. Rate: Q/t = (0.040)(12.0)(25.0) ÷ 0.0900 = 133 W. 3. Energy in one day: (133.3 W)(86,400 s) = \(1.15 \times 10^7\) J, which is 3.20 kWh. 4. At $0.15 per kWh that costs about $0.48 a day. 5. Check: doubling the insulation to 18 cm would halve the rate to about 67 W.
Worked example: a copper rod melting ice
A copper rod 0.500 m long and 2.00 cm in diameter, with insulated sides, joins boiling water at 100 °C to a bath of ice and water at 0 °C. How much ice melts in 10.0 minutes? 1. Area: \(A = \pi r^2 = \pi(0.0100)^2 = 3.14 \times 10^{-4}\) m², using the radius, not the diameter. 2. Rate: Q/t = (400)(3.14 × 10⁻⁴)(100) ÷ 0.500 = 25.1 W. 3. Heat in 600 s: (25.13)(600) = 15,080 J. 4. Ice melted: m = Q/L_f = 15,080 ÷ 334,000 = 0.0451 kg, about 45 g. 5. Check: a steel rod, with k eight times smaller, would melt only about 5.6 g.
Convection: heat carried by a moving fluid
In natural convection, buoyancy drives the flow. Warm fluid expands, becomes less dense and rises; cooler, denser fluid sinks to take its place, and a circulating loop forms. A radiator sets up such a loop in a room, a pan of water heated from below churns the same way, and the sea breeze from the heat-capacity topic is convection on a coastal scale. In forced convection a fan, pump or wind drives the fluid, as when a car's pump pushes coolant through the engine. A cold wind chills you faster than still air at the same temperature because it keeps replacing the warmed air next to your skin.
Insulation: keeping air still
Still air is one of the poorest conductors there is, but given room to move it carries heat readily by convection. Most insulators therefore trap air in pockets too small for convection loops to form: fur, feathers, wool, fibreglass and foam all work this way. Double glazing traps a layer of air or another gas a centimetre or two thick between two panes. A vacuum flask goes further: the vacuum between its double walls blocks both conduction and convection, and silvered surfaces facing the gap cut radiation, so a hot drink stays hot and a cold one cold for hours.
Radiation: heat as light you cannot see
Every object above absolute zero emits electromagnetic radiation. At everyday temperatures it is almost all infrared, invisible but easily felt; a stove element glowing red is at several hundred degrees Celsius, and hotter objects emit more power at shorter wavelengths. Radiation needs no medium, which is how sunlight crosses empty space to Earth. A surface that absorbs a wavelength well also emits it well. Black car paint absorbs much more sunlight than white, while shiny metal is a poor absorber and a poor emitter of infrared, which is why emergency blankets are made of metallised foil. Earth's surface radiates infrared too; water vapour and carbon dioxide in the air absorb much of it and re-emit part back down. This greenhouse effect warms the surface by absorption and re-emission, not by glass-like trapping.
The Stefan-Boltzmann law
The power radiated by a surface of area \(A\) at absolute temperature \(T\) is
where \(\sigma = 5.67 \times 10^{-8}\) W/(m²·K⁴) is the Stefan-Boltzmann constant. The emissivity \(e\) runs from 0 for a perfect reflector to 1 for an ideal absorber and emitter, called a black body; human skin has \(e \approx 0.97\) in the infrared. \(T\) must be in kelvin, and because of the fourth power, doubling it multiplies the power by 16. An object in surroundings at \(T_s\) also absorbs radiation, so its net rate of loss is
Worked example: a wood-burning stove
A stove's outer surface has an area of 1.20 m², an emissivity of 0.90 and a temperature of 250 °C, in a room at 20 °C. What net power does it radiate into the room? 1. Kelvin: T = 523.15 K and \(T_s\) = 293.15 K. 2. Emitted: (5.67 × 10⁻⁸)(0.90)(1.20)(523.15)⁴ = 4587 W. 3. Absorbed from the room: (5.67 × 10⁻⁸)(0.90)(1.20)(293.15)⁴ = 452 W. 4. Net: 4587 − 452 = 4135 W, about 4.1 kW. 5. Check: the kelvin ratio is 1.78, and 1.78⁴ ≈ 10, so the room returns about a tenth of what the stove emits. Convection from the hot surface adds still more heat.
Common mistakes to avoid
First, using Celsius in the Stefan-Boltzmann law: \(T^4\) needs kelvin. Second, computing \((T - T_s)^4\) instead of \(T^4 - T_s^4\). Third, leaving thickness in centimetres in the conduction equation. Fourth, using a diameter where the area needs a radius. Fifth, thinking cold flows in: heat flows out of the warmer region, and cold is only its absence. Sixth, calling air a good conductor because a draughty room feels cold: that is convection, not conduction. Seventh, assuming convection can happen in a solid; it needs a fluid that can flow.
Key takeaways
Heat travels by conduction through matter, convection with a moving fluid and radiation as electromagnetic waves. Conduction through a slab obeys Q/t = kAΔT/d, so metals conduct well and trapped air insulates. Convection is natural, driven by buoyancy, or forced by fans and pumps, and insulators work by stopping it. Every object radiates P = σeAT⁴ with T in kelvin and σ = 5.67 × 10⁻⁸ W/(m²·K⁴); the net loss is σeA(T⁴ − Tₛ⁴). Good absorbers are good emitters, and shiny surfaces are poor at both.
Flashcards
Flashcard
Heat passed through matter by particle collisions, with no bulk flow
Test your understanding
Question 1 of 5
Heat flows through a wooden panel 2.50 cm thick with an area of 2.00 m² (k = 0.12 W/(m·°C)). One face is 15.0 °C warmer than the other. What is the rate of conduction?
Question 2 of 5
The insulation in a wall is replaced by the same material twice as thick. With the same inside and outside temperatures, what happens to the rate of conduction?
Question 3 of 5
A hotplate warms from 100 °C to 200 °C. By about what factor does the power it radiates increase?
Question 4 of 5
A blackened iron ball with a surface area of 0.0500 m² and emissivity 0.95 is at 400 °C in a room at 25 °C. What is its net rate of radiative heat loss?
Question 5 of 5
Why does a jacket filled with down feathers keep you warm?
