Physics › Section K · Oscillations and waves › Topic K.1
Hooke's law, period, and frequency
A plucked ruler, a bouncing car and a vibrating guitar string all move back and forth about a resting position. A restoring force that grows with displacement drives that motion, and two numbers, the period and the frequency, describe how fast it repeats.
Motion that repeats
Hold one end of a ruler flat on a desk, bend the free end down and let go. It flicks up, overshoots, comes back and keeps going for a while before settling. Motion like this, back and forth about a resting position, is an oscillation. The resting position is the equilibrium position, where no net force acts. Oscillations are everywhere: a car bobbing on its springs after a pothole, a diving board, a guitar string, the quartz crystal in a watch and the atoms in every solid.
Why an oscillator overshoots
Displace an object from equilibrium and a restoring force appears, pointing back towards equilibrium. Released, the object speeds up as it returns. At equilibrium the net force is zero, but the object is moving, and by Newton's first law it keeps going. Now it is displaced the other way, so the restoring force reverses, slows it to a stop and sends it back. So the cycle repeats. Only losses such as friction and drag, which remove mechanical energy, make a real oscillation die away, an effect called damping that a later topic covers.
Hooke's law as a restoring force
The elasticity topic introduced Hooke's law for small deformations. For oscillations it is written with a sign:
Here \(x\) is the displacement from equilibrium, positive in whichever direction you choose, and \(F\) is the restoring force. The minus sign says the force always points opposite to the displacement: stretch a spring to the right and it pulls left. The force constant \(k\), in N/m, measures stiffness. A car's suspension has a large \(k\); a soft toy spring a small one. Many systems, from rulers to molecules, follow this law for small enough displacements.
Measuring a force constant
To test a spring, hang known masses from it and measure each extension. When a hanging mass is at rest, the spring's upward force balances its weight, so the spring force equals \(mg\). Plot the magnitude of the force against the extension. If the points lie on a straight line through the origin, the spring obeys Hooke's law, and the slope of the line is \(k\):
If the line curves at large extensions, the spring has passed its proportional limit, so use only the straight part. A slope taken from the whole line averages out small reading errors.
Worked example: calibrating a spring
A student hangs masses of 0.100, 0.200, 0.300 and 0.400 kg from a spring and measures extensions of 2.45, 4.90, 7.35 and 9.80 cm. Find \(k\), then predict the extension with 0.250 kg. Use \(g = 9.80\) m/s². 1. The forces are the weights: 0.980, 1.96, 2.94 and 3.92 N. 2. The points lie on a line through the origin, so Hooke's law holds. 3. Slope from the first and last points: \(k = \frac{3.92 - 0.980}{0.0980 - 0.0245} = 40.0\) N/m. 4. A 0.250 kg mass weighs 2.45 N, so \(x = \frac{2.45}{40.0} = 0.0613\) m, or 6.13 cm. 5. Check: 0.250 kg lies midway between 0.200 and 0.300 kg, and 6.13 cm lies midway between 4.90 and 7.35 cm.
A spring hanging vertically
When a mass hangs from a spring, gravity shifts the equilibrium position down by \(d = \frac{mg}{k}\). Pull the mass below that point and release it, and it oscillates about the new equilibrium, not about the spring's relaxed length. The reason is that the extra stretch \(x\) below the new equilibrium adds an extra upward force \(kx\), while the weight and the original \(kd\) still cancel. So the net force is still \(-kx\), measured from the new equilibrium. Gravity moves the centre of the motion but leaves the force law unchanged.
Energy stored in a deformation
Deforming a system takes work, and if nothing is lost to heat or sound, that work is stored as elastic potential energy. The force needed rises steadily from 0 to \(kx\), so the average force is \(\tfrac{1}{2}kx\), and multiplying by the distance \(x\) gives
This matches the spring energy found in the topic on conservative and nonconservative forces, and it applies to any system obeying Hooke's law. Because \(x\) is squared, the energy is the same for a stretch or a compression of equal size, and doubling the deformation stores four times the energy.
Worked example: a trampoline
A 50.0 kg gymnast stands still on a trampoline, which sags 0.140 m. Model the bed as a Hooke's law spring, ignoring its mass. Find \(k\), then the energy stored and the upward force when a bounce drives the bed 0.600 m down. 1. Standing still, the bed's force balances her weight: \(k = \frac{(50.0)(9.80)}{0.140} = 3500\) N/m, or \(3.50 \times 10^3\) N/m. 2. Energy at 0.600 m: \(\tfrac{1}{2}(3500)(0.600)^2 = 630\) J. 3. Force at 0.600 m: \((3500)(0.600) = 2100\) N, upwards. 4. Check: the deflection is 4.29 times the sag, so the force should be 4.29 times her 490 N weight, and \(4.29 \times 490 = 2100\) N.
Period and frequency
Motion that repeats at regular time intervals is periodic. One complete back-and-forth cycle takes the same time as the next, and that time is the period, \(T\), usually in seconds. The frequency, \(f\), is the number of cycles per unit time. The two are reciprocals:
The SI unit of frequency is the hertz, 1 Hz = 1 cycle per second, which is the same as \(1\ \mathrm{s}^{-1}\). A swing with a period of 2.5 s has a frequency of 0.40 Hz, and a tuning fork at 440 Hz completes one cycle every 2.27 ms. A long period always means a low frequency.
Worked example: timing an oscillation
A student times 25 complete oscillations of a mass on a spring and reads 18.0 s on a stopwatch. Find the period and frequency. 1. Period: \(T = \frac{18.0\ \mathrm{s}}{25} = 0.720\) s. 2. Frequency: \(f = \frac{1}{0.720\ \mathrm{s}} = 1.39\) Hz. 3. Check: \(f\) should also equal cycles per second, and \(\frac{25}{18.0} = 1.39\) Hz. Timing many cycles is deliberate: a reaction-time error of about 0.2 s is shared over 25 cycles, shifting the period by only about 0.008 s. The reciprocal works at any scale: a watch crystal at 32,768 Hz has a period of \(3.05 \times 10^{-5}\) s, or 30.5 µs.
Common mistakes to avoid
First, ignoring the minus sign in \(F = -kx\): a stretch to the right gives a pull to the left. Second, measuring a hanging mass's \(x\) from the relaxed length instead of the stretched equilibrium. Third, leaving extensions in centimetres when \(k\) is in N/m. Fourth, writing \(PE_{el} = kx^2\) or \(\tfrac{1}{2}kx\); the half and the square both matter. Fifth, confusing period and frequency, or dividing the wrong way: a count of 25 cycles in 18.0 s gives \(T = 18.0/25\), not \(25/18.0\).
Key takeaways
An oscillation is repeated motion about an equilibrium position, where the net force is zero. A restoring force pulls the object back, and its momentum carries it past equilibrium each time. Hooke's law, F = −kx, describes the simplest restoring force, with k in N/m equal to the slope of a force-extension graph. A hanging mass oscillates about its stretched equilibrium with the same law. A Hooke's law deformation stores PE = ½kx². The period T is the time for one cycle, the frequency f is cycles per second in hertz, and f = 1/T.
Flashcards
Flashcard
Repeated back-and-forth motion about an equilibrium position
Test your understanding
Question 1 of 5
A spring with k = 250 N/m is stretched 0.060 m to the right of equilibrium. What restoring force does it exert?
Question 2 of 5
A force-extension graph for a spring is a straight line through the origin and the point (0.080 m, 12.0 N). What is the force constant?
Question 3 of 5
How much elastic potential energy is stored in a spring with k = 1200 N/m compressed 0.050 m from its relaxed length?
Question 4 of 5
A mass on a spring completes 40 oscillations in 30.0 s. What is its frequency?
Question 5 of 5
A mass oscillating on a frictionless horizontal spring passes through its equilibrium position. Why does it not stop there?
