Physics › Section S · Vision, instruments, and wave optics › Topic S.2

Microscopes, telescopes, and aberrations

Two lenses in a tube let you see a cell's nucleus or the moons of Jupiter. Microscopes and telescopes are built from the thin lenses and mirrors you already know, and their limits come from the ways real lenses fall short of the ideal.

Instruments with more than one lens

Microscopes and telescopes use two or more lenses in a row. Analyse them one lens at a time: whatever image one lens forms serves as the object for the lens after it. Multiply the separate magnifications to get the overall one. Instruments are designed so that the final image lies far from the eye, because a relaxed eye focuses on distant images, which makes long viewing comfortable. All the lenses here follow the thin-lens convention: real image distances are positive, virtual ones negative, and a diverging lens has a negative focal length.

Angular magnification and the magnifier

How big something looks depends on the angle it fills at your eye. The best you can do unaided is to hold an object of height \(h\) at your 25 cm near point, where it fills an angle \(\theta \approx h/(25\ \text{cm})\) in radians, using the small-angle approximation. Place the object exactly one focal length from a converging lens and the image is at infinity, viewed relaxed, and fills \(\theta' \approx h/f\). The angular magnification is the ratio of the two angles:

M = \frac{\theta'}{\theta} = \frac{25\ \text{cm}}{f}

A magnifying glass with \(f = 5.00\) cm gives \(M = 5.00\), often written 5.00×. A shorter focal length magnifies more.

The compound microscope

A compound microscope has an objective lens of very short focal length close to the specimen and an eyepiece near the eye. The specimen sits just beyond the objective's focal point, so the objective forms a real, inverted, enlarged image with lateral magnification \(m_{\text{obj}} = -d_i/d_o\). The eyepiece then acts as a magnifier on that image; with the image at its focal point,

M_{\text{eye}} = \frac{25\ \text{cm}}{f_e}

The overall magnification is

M = m_{\text{obj}} \times M_{\text{eye}}

The negative sign means the final, virtual image is inverted, which is why a slide moves the opposite way to what you see. A 40× objective with a 10× eyepiece gives 400×.

Worked example: a student microscope

A microscope's objective has a focal length of 4.00 mm and its eyepiece 25.0 mm. A specimen is 4.20 mm from the objective. Find the overall magnification for relaxed viewing and the lens separation. 1. Objective image:

\frac{1}{d_i} = \frac{1}{4.00} - \frac{1}{4.20}

so \(d_i = 84.0\) mm. 2. Objective: \(m_{\text{obj}} = -84.0/4.20\), which is −20.0. 3. Eyepiece: 25 cm is 250 mm, so \(M_{\text{eye}} = 250/25.0 = 10.0\). 4. Overall: \(M = -20.0 \times 10.0 = -200\). 5. For relaxed viewing the first image sits at the eyepiece's focal point, so the lenses are \(84.0 + 25.0 = 109\) mm apart. 6. Check: \(1/84.0 + 1/4.20 = 0.250\), which is \(1/4.00\), as the thin-lens equation requires.

How far a light microscope can go

Magnification alone does not reveal detail. Because light is a wave, a light microscope cannot separate details much smaller than about half the wavelength of visible light, roughly 200 nm; a later topic explains this limit. Beyond about 1000× to 1500×, extra magnification only enlarges the blur. To gather as much light from the specimen as possible, a condenser lens floods it with light, and high-power objectives work with a drop of immersion oil, refractive index about 1.5, between lens and slide. Electron microscopes, which use electron beams with far shorter wavelengths, reveal much finer detail, down to individual atoms.

The refracting telescope

A telescope views objects so far away that their light arrives as parallel rays, so the objective lens forms a real, inverted image at its focal point. The eyepiece magnifies that image. For relaxed viewing, the first image sits at the eyepiece's focal point too, so the lenses are \(f_o + f_e\) apart. The angular magnification is

M = -\frac{f_o}{f_e}

The minus sign shows the image is inverted. For high magnification use a long-focus objective and a short-focus eyepiece. Galileo's design used a diverging eyepiece and gave an upright image; binoculars and terrestrial telescopes use prisms or an extra lens to turn the image upright.

Worked example: looking at the Moon

A telescope has an objective of focal length 1.20 m and an eyepiece of 25.0 mm. The Moon fills about 0.50° of sky. Find the angular magnification, the tube length for relaxed viewing and how wide the Moon appears. 1. Magnification: \(M = -1.20/0.0250 = -48.0\). 2. Length: \(f_o + f_e = 1.20 + 0.025 = 1.23\) m. 3. Apparent size: \(48.0 \times 0.50° = 24°\), inverted. 4. Check: swapping to a 12.5 mm eyepiece halves \(f_e\), so \(M\) should double to −96.0, and \(1.20/0.0125 = 96.0\). Using \(M = \theta'/\theta\) at 24° stretches the small-angle approximation, so treat it as an estimate.

Reflecting telescopes

Large telescopes replace the objective lens with a concave mirror, which focuses parallel light at its focal point, \(f = R/2\). Mirrors have three big advantages. Reflection does not depend on wavelength, so a mirror has no chromatic aberration. A mirror can be supported across its whole back, while a large lens sags under its own weight and can be held only at its rim. And a mirror can be made very large, up to about 10 m across today, often from segments. Light gathered grows with the area of the objective, so with the square of its diameter: an 8.0 m mirror collects about 1.3 million times more light than a 7.0 mm dark-adapted pupil.

Aberrations

Real lenses depart from the ideal thin lens, and the resulting blurs are called aberrations. In spherical aberration, rays through the outer parts of a spherical lens or mirror focus closer than rays near the axis; aspheric surfaces, such as a parabolic mirror, or a smaller aperture reduce it. In chromatic aberration, the refractive index varies with wavelength, so violet focuses closer than red and images get coloured fringes. An achromatic doublet, a converging crown-glass lens cemented to a weaker diverging flint-glass lens, largely cancels it. Coma blurs off-axis points into comet shapes, and astigmatism focuses two directions at different distances. Adaptive optics bend thin mirrors many times a second to undo atmospheric shimmer.

Common mistakes to avoid

First, adding the magnifications of two lenses; they multiply. Second, writing the telescope formula upside down: \(f_o/f_e\), objective on top, gives a large number. Third, using centimetres for one focal length and millimetres for the other in a ratio. Fourth, thinking more magnification always shows more detail; the wave nature of light sets a limit. Fifth, forgetting the minus signs, which tell you the final image is inverted. Sixth, believing mirrors suffer chromatic aberration; reflection treats all colours alike.

Key takeaways

Multi-lens instruments are analysed lens by lens, each image becoming the next object, and magnifications multiply. A magnifier gives M = 25 cm/f. A compound microscope gives M = m(obj) × M(eye), with m(obj) = −dᵢ/dₒ and M(eye) = 25 cm/f(e), and an inverted image. A telescope gives M = −f(o)/f(e) with lenses f(o) + f(e) apart for relaxed viewing. Reflecting telescopes avoid chromatic aberration and can be huge; light gathered grows as the diameter squared. Spherical aberration, chromatic aberration, coma and astigmatism are reduced with shaped surfaces, doublets and adaptive optics.

Flashcards

Flashcard

Multi-lens rule

Each lens's image is the next lens's object

Overall magnification is the product.

Test your understanding

Question 1 of 5

A microscope objective has a lateral magnification of −40.0 and its eyepiece an angular magnification of 10.0. What is the overall magnification?

Question 2 of 5

A telescope has an objective of focal length 90.0 cm and an eyepiece of focal length 1.50 cm. What is its angular magnification?

Question 3 of 5

What is the angular magnification of a magnifying glass of focal length 4.00 cm when the image is viewed at infinity?

Question 4 of 5

A telescope with an objective of focal length 1.00 m and an eyepiece of focal length 2.00 cm is set for relaxed viewing. How far apart are the lenses?

Question 5 of 5

Why does a mirror objective avoid chromatic aberration?

← Previous topicNext topic →