Physics › Section U · Quantum and atomic physics › Topic U.1
Quantization and the photoelectric effect
Around 1900, light and heat refused to behave as classical physics said they should. Two puzzles, the glow of hot objects and the electrons that light knocks out of metals, were solved by one radical idea: energy comes in separate packets.
A glowing puzzle
Heat an iron poker and it glows dull red, then orange, then nearly white. An ideal absorber and emitter, called a blackbody, gives off radiation whose spectrum depends only on its temperature. As it gets hotter, the radiated power climbs steeply and the peak moves to shorter wavelengths. Classical physics could not reproduce the shape of this curve: its prediction rose without limit at short wavelengths, so even a warm object should blaze with ultraviolet light. That absurd result was later called the ultraviolet catastrophe.
Planck's quantum
In 1900 Max Planck matched the measured curve with a bold assumption. He treated the atoms in a hot body as oscillators and allowed an oscillator of frequency \(f\) to have only the energies
Here \(h\) is Planck's constant, \(h = 6.626 \times 10^{-34}\ \text{J}\cdot\text{s}\). The energy can then change only in whole steps of \(hf\), called quanta. A quantity that can take only certain separate values is said to be quantised. Think of a staircase rather than a ramp. Planck at first saw his assumption as a mathematical device and was slow to accept that it described something real.
Why we never notice the steps
Because \(h\) is so small, a pendulum swinging once a second could change its energy only in steps of \(6.6 \times 10^{-34}\) J, far below anything measurable. This is the correspondence principle: for large systems, quantum physics agrees with classical physics. For atoms the steps matter. An infrared molecular vibration at \(5.0 \times 10^{13}\) Hz has steps of \(3.3 \times 10^{-20}\) J. Atomic energies are usually given in electron volts, the energy an electron gains crossing a potential difference of 1 V: \(1\ \text{eV} = 1.602 \times 10^{-19}\) J. That step is 0.21 eV, while atoms and molecules typically exchange between about 0.1 and 10 eV.
Line spectra point the same way
A second clue came from gases. A thin gas glowing in an electric discharge gives a few sharp, bright lines rather than a continuous band, in a pattern unique to each element. If each line has a definite frequency \(f\), the atoms are giving out energy in definite amounts \(hf\), so the energy of the atoms themselves must be quantised. Explaining exactly which lines appear took until 1913; a later topic in this section shows how Niels Bohr did it for hydrogen.
The photoelectric effect
Light of high enough frequency falling on a clean metal ejects electrons, called photoelectrons. To study them, a metal plate and a collector sit in an evacuated tube, with the collector made negative so that it repels the electrons. As this retarding voltage rises, fewer electrons arrive, and at the stopping voltage \(V_0\) even the fastest are turned back. Those fastest electrons therefore had
so a stopping voltage of 1.5 V means they left with 1.5 eV. The current in the circuit measures how many electrons leave each second, which is how light meters and photomultiplier tubes work.
Results that waves cannot explain
Experiments, notably Philipp Lenard's in 1902, gave four results. 1. Each metal has a threshold frequency \(f_0\): below it, no electrons leave, however bright the light. 2. Above it, electrons leave with no measurable delay, even in very dim light. 3. Brighter light ejects more electrons per second. 4. The maximum kinetic energy depends on the frequency, not the intensity. A classical wave spreads its energy smoothly over the surface, so bright light of any frequency should eventually free electrons, dim light should need time to build up energy, and brighter light should give faster electrons. Results 1, 2 and 4 contradict these predictions.
Einstein's photons
In 1905 Albert Einstein proposed that light itself is quantised. It travels as photons, each with energy \(E = hf\), and a photon gives all its energy to a single electron. Freeing an electron from the metal takes at least the work function \(\phi\), the smallest energy that binds an electron to the surface. The rest becomes kinetic energy, so the fastest electrons have
Most electrons lose some extra energy on the way out and leave with less. If \(hf\) is less than \(\phi\), no electron can escape, so the threshold is \(f_0 = \phi/h\). Brighter light means more photons, so more electrons but not faster ones. This work earned Einstein the 1921 Nobel Prize.
Work functions and the energy graph
Work functions are a few electron volts. Approximate values for clean surfaces are caesium 2.1 eV, potassium 2.3 eV, calcium 2.9 eV, zinc 4.3 eV, copper 4.7 eV and platinum 5.6 eV; measured values vary with the state of the surface. For wavelengths, combine \(E = hf\) with \(f = c/\lambda\):
So caesium responds to visible light, while copper needs ultraviolet. A graph of \(KE_{\max}\) against \(f\) is a straight line for every metal, with slope \(h\) and a horizontal intercept at \(f_0\). Robert Millikan's measurements of such lines confirmed Einstein's equation in 1916.
Worked example: potassium under violet light
Violet light of wavelength 400 nm falls on potassium, with \(\phi = 2.3\) eV. Find the photon energy, the maximum kinetic energy, the stopping voltage and the threshold wavelength. 1. Photon energy: \(E = 1240/400 = 3.10\) eV. 2. Maximum kinetic energy: \(KE_{\max} = 3.10 - 2.3 = 0.8\) eV. 3. Stopping voltage: \(eV_0 = 0.8\) eV, so \(V_0 = 0.8\) V. 4. Threshold: a photon must carry at least \(\phi\), so \(\lambda_0 = hc/\phi = 1240/2.3\), about 540 nm, which is green light. 5. Check: 400 nm is shorter than 540 nm, so each photon carries more than \(\phi\) and the kinetic energy is positive, as found.
Worked example: identifying a metal
Ultraviolet light of 300 nm ejects electrons from an unknown metal, and the stopping voltage is 1.20 V. Find the work function, identify the metal, and predict the stopping voltage for 250 nm light. 1. Photon energy at 300 nm: \(1240/300 = 4.13\) eV. 2. From the stopping voltage, \(KE_{\max} = 1.20\) eV. 3. Rearrange Einstein's equation: \(\phi = hf - KE_{\max}\) = 4.13 − 1.20 = 2.93 eV, which matches calcium. 4. At 250 nm: \(E = 1240/250 = 4.96\) eV, so \(KE_{\max} = 4.96 - 2.93 = 2.03\) eV and \(V_0 = 2.03\) V. 5. Check: the photon energy rose by 0.83 eV, and the stopping voltage rose by exactly 0.83 V, because \(\phi\) is fixed for the metal.
Common mistakes to avoid
First, expecting brighter light to give faster electrons; intensity sets how many electrons leave, frequency sets their maximum energy. Second, expecting light below the threshold to work if it is bright enough or shines long enough. Third, mixing units: with \(hc = 1240\ \text{eV}\cdot\text{nm}\), the wavelength must be in nanometres and the energy comes out in eV, not joules. Fourth, adding the work function instead of subtracting it. Fifth, confusing Planck's idea with Einstein's: Planck quantised the energy of oscillating matter, and Einstein quantised light itself.
Key takeaways
Planck explained blackbody radiation in 1900 by quantising oscillator energy, E = nhf, with h = 6.626 × 10⁻³⁴ J·s. The steps are negligible for everyday objects but matter for atoms, whose energies are in eV (1 eV = 1.602 × 10⁻¹⁹ J). Light ejects photoelectrons only above a threshold frequency, at once, with a maximum energy set by frequency, not intensity. Einstein explained this with photons of energy hf: KE_max = hf − φ = eV₀, and f₀ = φ/h. For wavelengths, E = hc/λ with hc = 1240 eV·nm.
Flashcards
Flashcard
An ideal absorber and emitter whose radiation spectrum depends only on its temperature
Test your understanding
Question 1 of 5
What is the energy of one photon of 500 nm blue-green light? Use hc = 1240 eV·nm.
Question 2 of 5
Monochromatic light above the threshold frequency falls on a metal. Its intensity is doubled and its frequency is kept the same. What happens?
Question 3 of 5
Light of wavelength 450 nm falls on caesium, whose work function is 2.1 eV. What is the stopping voltage? Use hc = 1240 eV·nm.
Question 4 of 5
Ultraviolet light of wavelength 350 nm shines on zinc, whose work function is 4.3 eV. What happens? Use hc = 1240 eV·nm.
Question 5 of 5
For any metal, a graph of the maximum kinetic energy of photoelectrons, in joules, against the frequency of the light is a straight line. What does its slope equal?
