Physics › Section R · Electromagnetic waves and geometric optics › Topic R.3
Rays and the law of reflection
Most of what you see is light that has bounced off something. Treating light as straight-line rays, and knowing one simple rule for how those rays bounce, explains shadows, pinhole cameras, mirrors, glare on a wet road and the reflectors on a bicycle.
How light reaches your eyes
Light reaches you in three ways: straight across empty space, as sunlight does; through transparent materials such as air, water and glass; or after bouncing off a surface. Only a few things you see, such as the Sun, a lamp or a screen, give out their own light. Everything else, from a printed page to the Moon, is visible because it sends some of the light falling on it towards your eyes. The simplest useful model for following all these paths is the ray.
The ray model of light
A ray is a straight line showing the direction in which light travels. In a uniform material, light goes in straight lines, and it changes direction only where it meets a surface or passes into a different material. The ray model works when light meets objects much larger than its wavelength, which for visible light is less than a micrometre, so it covers mirrors, lenses, windows and everyday shadows. Optics built on rays is called geometric optics, because its problems reduce to geometry. For openings comparable to the wavelength, light's wave nature shows, and wave optics, in a later section, takes over.
Worked example: a pinhole camera
A pinhole camera is a light-tight box with a tiny hole in one face and a screen opposite. A tree 12.0 m tall stands 30.0 m from the pinhole, and the box is 0.150 m deep. Find the image height. 1. Straight rays from the treetop and the base cross at the hole, so the image is inverted. 2. The two triangles on either side of the hole are similar, so the image height over the box depth equals the tree height over its distance:
3. The image is 6.00 cm tall and upside down. 4. Check: the box depth is 1/200 of the distance, and 6.00 cm is 1/200 of 12.0 m.
Describing a reflection
To describe a ray striking a surface, draw the normal, a line at right angles to the surface where the ray lands. The incoming ray is the incident ray, and its angle with the normal is the angle of incidence, \(\theta_i\). The outgoing ray is the reflected ray, at the angle of reflection \(\theta_r\). Measuring from the normal, not the surface, is the standard convention, and it works for curved surfaces too. A ray striking head-on travels along the normal, with \(\theta_i = 0\).
The law of reflection
A laser and a mirror always show:
The angle of reflection equals the angle of incidence. In addition, the incident ray, the normal and the reflected ray all lie in the same plane, and the reflected ray is on the opposite side of the normal from the incident ray. The law is reversible: send light backwards along the reflected ray and it leaves along the original incident ray. A ray striking along the normal returns straight back on itself. Because the angles are equal, the ray is turned through an angle of \(180^\circ - 2\theta_i\) in total.
Worked example: turning a mirror
A ray hits a flat mirror, making an angle of 25.0° with the mirror's surface. (a) Find the angles of incidence and reflection. (b) The mirror is then rotated by 10.0° so that the angle of incidence grows. By how much does the reflected ray turn? 1. The normal is at 90.0° to the surface, so \(\theta_i = 90.0^\circ - 25.0^\circ = 65.0^\circ\). 2. By the law of reflection, \(\theta_r = 65.0^\circ\). 3. The ray is turned through \(180^\circ - 2(65.0^\circ) = 50.0^\circ\). 4. After rotation, \(\theta_i = 75.0^\circ\) and the ray is turned through \(180^\circ - 150^\circ = 30.0^\circ\). 5. The reflected ray has swung by \(50.0^\circ - 30.0^\circ = 20.0^\circ\), twice the mirror's rotation. Check: every degree added to \(\theta_i\) is also added to \(\theta_r\), so the gap between the rays changes by two degrees.
Specular and diffuse reflection
A mirror, still water or polished metal is smooth on the scale of light's wavelength, so parallel rays striking it stay parallel and leave in one direction. This is specular reflection, and it forms clear images. Paper, cloth, skin and painted walls are rough on that scale. Each tiny patch still obeys the law of reflection, but the patches face many different ways, so parallel rays scatter in all directions. This is diffuse reflection, and it is why you can see a page from any angle and why it shows no image of you. A wet road at night shows the difference: the water film turns it into a mirror that reflects headlights forwards as glare.
Images in a plane mirror
Rays from a point on your nose reflect from a flat mirror and spread out as if they came from a single point behind the glass. Your eye traces them back in straight lines, so you see your nose there. The law of reflection, applied to two such rays, puts that point exactly as far behind the glass as your nose is in front of it. The image is virtual, because no light reaches the space behind the mirror, and it is upright and life-size. The mirrors topic later in this section treats flat and curved mirrors in detail.
Worked example: a corner reflector
Two flat mirrors meet at a right angle, one along the floor and one up a wall. A ray travels down towards the corner at 40.0° below the horizontal and strikes the floor mirror first. Where does it go? 1. At the floor, \(\theta_i = 90.0^\circ - 40.0^\circ = 50.0^\circ\), so it leaves rising at 40.0° above the horizontal, still moving towards the wall. Its horizontal motion is unchanged and its vertical motion has reversed. 2. It strikes the wall with \(\theta_i = 40.0^\circ\), because the wall's normal is horizontal. 3. Now its vertical motion is unchanged and its horizontal motion reverses. 4. Both parts have reversed, so the ray heads back exactly parallel to its original path. Check: the reasoning works for any starting angle. Bicycle reflectors use rows of corners with three perpendicular faces, which return light in three dimensions.
Common mistakes to avoid
First, measuring angles from the surface instead of from the normal; a ray at 25° to the mirror has an angle of incidence of 65°. Second, thinking a rough surface breaks the law of reflection; every small patch obeys it, and only the orientation of the patches varies. Third, believing that rotating a mirror by an angle turns the reflected ray by the same angle; it turns by twice the angle. Fourth, placing a plane-mirror image on the glass itself; it lies behind it. Fifth, using the ray model for openings comparable to the wavelength of light, where wave effects matter.
Key takeaways
In a uniform material light travels in straight lines, drawn as rays, and the ray model holds when objects are much larger than the wavelength. Angles are measured from the normal. The law of reflection says the angle of reflection equals the angle of incidence, with both rays and the normal in one plane. Smooth surfaces give specular reflection and images; rough surfaces give diffuse reflection, which lets us see objects from any direction. Rotating a mirror by an angle turns the reflected ray by twice that angle. A plane mirror forms an upright, life-size virtual image at the object's distance behind the glass, and two perpendicular mirrors send a ray back the way it came.
Flashcards
Flashcard
A straight line showing the direction light travels
Test your understanding
Question 1 of 5
A ray of light strikes a flat mirror, making an angle of 35° with the mirror's surface. What is the angle of reflection?
Question 2 of 5
Why can you read a sheet of paper from almost any direction, while a mirror shows a bright reflection only from certain directions?
Question 3 of 5
A laser beam reflects from a flat mirror. The mirror is rotated by 15° while the beam stays fixed. Through what angle does the reflected beam turn?
Question 4 of 5
You stand 2.0 m in front of a flat mirror. How far are you from your image?
Question 5 of 5
A pinhole camera 0.200 m deep views a flagpole 2.40 m tall standing 6.00 m from the pinhole. How tall is the image?
