Physics › Section I · Temperature, gases, and heat › Topic I.1

Temperature and thermal expansion

Temperature tells you which way energy will flow between two objects, and changing it makes almost everything grow or shrink a little. This topic sets up the temperature scales and the zeroth law, then the rules for thermal expansion that keep railways and bridges safe.

What a thermometer measures

Your skin is a poor thermometer. Step from a rug onto a tiled floor in the same room and the tiles feel colder, although both are at room temperature: tile simply draws energy from your foot faster. Physics therefore defines temperature as the quantity a thermometer reads. Any property that changes reproducibly with temperature will do: a liquid column, a wire's resistance, or the infrared radiation an object emits. A thermometer reads only its own temperature. In contact with an object, it exchanges energy until both reach the same temperature, a state called thermal equilibrium; only then does the reading describe the object.

The zeroth law and three scales

The zeroth law of thermodynamics says that two objects which are each in thermal equilibrium with a third are in thermal equilibrium with one another. So one thermometer can compare any two objects. Celsius puts water's freezing and boiling points at 1 atm at 0 °C and 100 °C. Fahrenheit, still common in the United States, puts them at 32 °F and 212 °F, so one Celsius degree is 1.8 Fahrenheit degrees. The SI unit is the kelvin, K, written without a degree sign: the same size as a Celsius degree, but counted from absolute zero.

T_{\text{F}} = 1.8\,T_{\text{C}} + 32 \qquad T_{\text{K}} = T_{\text{C}} + 273.15

The second conversion is exact.

Worked example: a weather report

A forecast gives a low of 14.0 °F and a high of 59.0 °F. Convert both to degrees Celsius and kelvins, and find the day's range on each scale. 1. Rearrange: \(T_{\text{C}} = (T_{\text{F}} - 32)/1.8\). 2. Low: \((14.0 - 32)/1.8 = -10.0\) °C, which is 263.15 K. 3. High: \((59.0 - 32)/1.8 = 15.0\) °C, which is 288.15 K. 4. Range: 45.0 Fahrenheit degrees, or 25.0 Celsius degrees, which is also 25.0 K. 5. Check: \(45.0/1.8 = 25.0\). A change is the same number in kelvins as in Celsius degrees, because the units are the same size.

Absolute zero

Cool a sealed, rigid can of gas and its pressure falls in a straight line with temperature. Extend the lines for different gases and all reach zero pressure at the same point, −273.15 °C (−459.67 °F). That is absolute zero, 0 K, the lowest temperature possible. Real gases liquefy first, and absolute zero can be approached but never reached. Particles do not stop dead there: quantum physics leaves them a small zero-point energy, so 0 K is the state of minimum energy, not of no motion. Since 2019 the kelvin has been defined by fixing the Boltzmann constant, which the next two topics use.

Linear thermal expansion

Most materials grow when heated. Atoms in a solid vibrate about their positions, more widely when hotter, and because neighbours resist being pushed together more than being pulled apart, the average spacing grows. A length \(L_0\) changes by

\Delta L = \alpha L_0 \Delta T

where \(\Delta T\) is the temperature change and \(\alpha\) is the coefficient of linear expansion, in 1/°C, which equals 1/K. Approximate values, in units of \(10^{-6}\) per °C: Invar alloy 1.2, Pyrex glass 3.3, ordinary glass 9, steel and concrete 12, copper 17, brass 19, aluminium 23. Since \(\alpha\) varies slightly with temperature, the rule suits moderate changes best.

Worked example: a summer rail

A steel rail 25.0 m long is laid at 10.0 °C. If it is free to expand, how much longer is it at 45.0 °C? Take \(\alpha = 12 \times 10^{-6}\) per °C. 1. Temperature change: \(\Delta T = 35.0\) °C. 2. Substitute: \(\Delta L = (12 \times 10^{-6})(25.0)(35.0)\). 3. Evaluate: \(\Delta L = 1.05 \times 10^{-2}\) m, about 11 mm to the two figures \(\alpha\) allows. 4. Check: the fractional change, \(\alpha \Delta T = 4.2 \times 10^{-4}\), is under a tenth of a percent, yet a centimetre per rail is easy to see. Hence the gaps between short rails, and the expansion joints in bridges.

Areas, holes and volumes

Every dimension grows by the same fraction, so areas and volumes grow too, and a hole grows just as the material that filled it would: a tight steel ring is heated to fit it onto a shaft. Areas grow by \(\Delta A = 2\alpha A_0 \Delta T\), and volumes by

\Delta V = \beta V_0 \Delta T

where \(\beta\) is the coefficient of volume expansion. For a solid that expands equally in all directions, \(\beta \approx 3\alpha\). Liquids have only \(\beta\), usually larger, in per °C: about \(1.8 \times 10^{-4}\) for mercury, \(2.1 \times 10^{-4}\) for water near 20 °C and \(1.1 \times 10^{-3}\) for ethanol.

Worked example: a brimming flask

A Pyrex flask is filled to the brim with 500.0 mL of ethanol at 15.0 °C, and both warm to 35.0 °C. How much ethanol spills? Use \(\beta = 1.1 \times 10^{-3}\) per °C for ethanol and \(\alpha = 3.3 \times 10^{-6}\) per °C for Pyrex. 1. The flask's inside grows as solid glass would: \(\beta \approx 3\alpha = 9.9 \times 10^{-6}\) per °C. 2. Ethanol grows by \((1.1 \times 10^{-3})(500.0)(20.0)\), which is 11.0 mL. 3. The flask grows by \((9.9 \times 10^{-6})(500.0)(20.0)\), which is 0.099 mL. 4. Spill: \(11.0 - 0.099 = 10.9\) mL, about 11 mL. 5. Check: the ethanol's coefficient is over 100 times the glass's, so nearly all its growth spills.

Water's odd behaviour

Water is the important exception. Above about 4 °C it expands on heating like other liquids, but from 0 °C to 4 °C it contracts as it warms, so its \(\beta\) is negative there, and liquid water is densest at 3.98 °C. As a lake cools in autumn, surface water at 4 °C sinks; once the whole lake is at 4 °C, colder water stays on top and freezes there. Ice is less dense still, so it floats and insulates the water below. Lakes therefore freeze from the top down, and fish survive the winter in the 4 °C water at the bottom.

Thermal stress

An object that cannot expand pushes on whatever holds it. Picture a heated rod expanding freely by a strain \(\alpha \Delta T\), then squeezed back to its first length. Since stress is Young's modulus times strain, a fully clamped rod carries

\frac{F}{A} = Y \alpha \Delta T

For the steel rail warmed by 35.0 °C, with \(Y = 200\) GPa,

\frac{F}{A} = (2.00 \times 10^{11})(12 \times 10^{-6})(35.0) = 8.4 \times 10^{7}\ \text{Pa}

or 84 MPa. On a cross-section of \(7.6 \times 10^{-3}\ \text{m}^2\), that is a push of about \(6.4 \times 10^{5}\) N, enough to buckle track, so long welded rails are anchored firmly and fastened at a warm stress-free temperature, leaving them in tension when cooler.

Common mistakes to avoid

First, adding 273.15 to a temperature change: a rise of 20 °C is a rise of 20 K, not 293 K. Second, using Celsius values where a ratio needs absolute temperatures; 40 °C is not twice as hot as 20 °C. Third, using \(\alpha\) for a volume change instead of \(\beta \approx 3\alpha\). Fourth, expecting a hole to shrink as the material around it expands. Fifth, forgetting that a container expands too: the spill is the difference of two volume changes. Sixth, treating water as a normal liquid between 0 °C and 4 °C.

Key takeaways

A thermometer reads an object's temperature once the two are in thermal equilibrium, and the zeroth law makes comparisons consistent. T(K) = T(°C) + 273.15 exactly, and T(°F) = 1.8 T(°C) + 32; changes are equal in kelvins and Celsius degrees. Absolute zero, 0 K, is the unreachable minimum. Lengths grow by ΔL = αL₀ΔT and volumes by ΔV = βV₀ΔT, with β ≈ 3α for solids; holes grow too. Water is densest at about 4 °C. A clamped rod carries a thermal stress YαΔT.

Flashcards

Flashcard

Temperature

The quantity a thermometer measures

Skin senses how fast energy leaves it, not temperature.

Test your understanding

Question 1 of 5

What is 77.0 °F in kelvins, to three significant figures?

Question 2 of 5

An aluminium rod is 2.00 m long at 20.0 °C. Taking α = 23 × 10⁻⁶ per °C, how much longer is it at 120.0 °C?

Question 3 of 5

A flat steel plate with a circular hole in it is heated evenly. What happens to the diameter of the hole?

Question 4 of 5

A solid copper sphere of volume 500 cm³ is heated by 80 °C. Taking α = 17 × 10⁻⁶ per °C for copper, by how much does its volume increase?

Question 5 of 5

A steel bar is clamped rigidly at both ends and warmed by 25.0 °C. With Y = 200 GPa and α = 12 × 10⁻⁶ per °C, what stress develops in it?

← Previous topicNext topic →