Physics › Section E · Work, energy, and power › Topic E.1

Work

In physics, work is not effort: it is energy handed over by a force that moves something. Learning exactly when a force does work, and when it does none, is the first step towards using energy to solve problems.

Effort is not work

Hold a full suitcase still for ten minutes and your arms ache, yet in physics you have done no work on it. Work, in the scientific sense, needs two things: a force acts on an object, and the object moves while that force has a component along the motion. When both happen, the force transfers energy to or from the object, and work measures how much. Your tired arms come from muscle fibres repeatedly contracting and relaxing to keep up the force, which uses food energy but gives the suitcase none.

The definition

For a constant force \(F\) acting while an object undergoes a straight-line displacement of size \(d\), the work done by that force is

W = Fd\cos\theta

where \(\theta\) is the angle from the direction of the force to the direction of motion. The factor \(F\cos\theta\) is the component of the force along the displacement, so only that component counts. Work is a scalar: it has a sign but no direction. Its SI unit is the newton-metre, named the joule: \(1\ \mathrm{J} = 1\ \mathrm{N\,m} = 1\ \mathrm{kg\,m^2\,s^{-2}}\). A joule is small: raising a 0.20 kg phone by half a metre takes about 1 J.

Positive, negative and zero work

The sign of the work comes from \(\cos\theta\). If the force has a component along the motion (\(\theta\) below 90°), the work is positive and the force gives the object energy, as your push does on a cart you speed up. If the force has a component against the motion (\(\theta\) above 90°), the work is negative and the force takes energy away. Kinetic friction on a sliding box points opposite to the displacement, so \(\theta = 180°\) and \(W = -fd\). If \(\theta = 90°\) exactly, \(\cos\theta = 0\) and the force does no work at all.

Worked example: pulling a wagon

A child pulls a wagon 12.0 m along level ground with a constant force of 45.0 N, directed along the handle at 35.0° above the horizontal. How much work does the child's force do? 1. The displacement is horizontal, so the angle between force and displacement is 35.0°. 2. Substitute: \(W = (45.0\ \mathrm{N})(12.0\ \mathrm{m})\cos 35.0°\). 3. Evaluate: \(W = 540 \times 0.8192 = 442\) J. 4. Check with components: the horizontal part of the pull is \(45.0\cos 35.0° = 36.9\) N, and \(36.86 \times 12.0 = 442\) J. The vertical part, about 25.8 N, lifts some weight off the wheels but does no work, because the wagon does not move vertically.

Forces that do no work

A force perpendicular to the displacement does zero work, however large it is. On a box sliding along a level floor, the normal force points straight up and gravity straight down, while the motion is horizontal, so neither does any work. Carry a bag across a level room at constant speed and your upward force on it does none either. A ball whirled on a string in uniform circular motion feels a tension that always points to the centre, perpendicular to its velocity at every instant, so the tension does no work and the ball's speed stays constant. And no displacement means no work: pushing on a wall that stays put transfers no energy to it.

Several forces and net work

When several forces act, each does its own work, and the total work is the sum of these signed amounts. Because work is a scalar, you simply add the numbers, keeping each sign. For forces that are all constant, the total equals the work done by the net force, \(W_{\text{net}} = F_{\text{net}}\,d\cos\theta\), which gives a useful cross-check. Net work is what changes an object's speed, as the next topic shows: positive net work means the forces together have given the object energy, and negative net work means they have taken some away.

Worked example: a crate against friction

A worker drags a 25.0 kg crate 8.00 m across a level floor with a horizontal rope pulling 95.0 N. Kinetic friction on the crate is 60.0 N. Find the work done by each force and the net work. 1. Rope: the force is along the motion, so \(W_{\text{rope}} = 95.0 \times 8.00 = 760\) J. 2. Friction: opposite to the motion, so \(W_f = -60.0 \times 8.00 = -480\) J. 3. Gravity and the normal force are perpendicular to the motion, so each does 0 J. 4. Net work: \(760 - 480 + 0 + 0 = 280\) J. 5. Check: the net force is \(95.0 - 60.0 = 35.0\) N along the motion, and \(35.0 \times 8.00 = 280\) J, in agreement.

Lifting and lowering

Lift a 3.00 kg box straight up by 0.800 m at constant speed. Your hand pushes up with a force equal to the box's weight, \(mg = 29.4\) N, along the motion, so you do \(29.4 \times 0.800 = 23.5\) J of work. Gravity points down while the box moves up, so gravity does \(-23.5\) J, and the net work is zero, as it must be at constant speed. Lower the same box slowly back down and the signs swap: gravity does \(+23.5\) J, while your upward hand, now opposing the motion, does \(-23.5\) J. This energy, stored on the way up and released on the way down, is the subject of gravitational potential energy.

Work from a force-displacement graph

When the force changes as the object moves, \(W = Fd\) no longer applies directly, but a graph of force component against position still gives the work: it is the area between the graph and the position axis. For a constant force the area is a rectangle, \(F \times d\). An ideal spring is the classic varying force. By Hooke's law the force needed to hold it stretched grows in proportion to the stretch, \(F = kx\) (the spring pulls back equally hard), where \(k\) is the spring constant in N/m. The graph is a straight line from the origin, so the area is a triangle:

W = \tfrac{1}{2}kx^2

Stretching a 250 N/m spring by 0.120 m takes \(\tfrac{1}{2}(250)(0.120)^2 = 1.80\) J. Area below the axis counts as negative work.

Common mistakes to avoid

First, using the wrong angle: \(\theta\) is the angle between the force and the displacement, so a rope at 30° above the horizontal on level ground gives \(\cos 30°\), not \(\cos 60°\) or \(\sin 30°\). Second, dropping the sign of friction's work, which is negative whenever friction opposes the sliding. Third, confusing effort with work: holding, or carrying something level, does no work on it. Fourth, writing the spring work as \(kx \times x\) and forgetting the factor of one half from the triangle. Fifth, adding the magnitudes of forces before finding work, instead of adding each force's signed work.

Key takeaways

A constant force does work W = Fd cos θ, where θ is the angle between force and displacement; only the force component along the motion counts. Work is a scalar measured in joules, 1 J = 1 N·m. It is positive when the force helps the motion, negative when it opposes it, and zero when the force is perpendicular or nothing moves. The total work on an object is the sum of each force's signed work, which equals the work of the net force. For a varying force, work is the area under the force-position graph, which gives ½kx² for a spring.

Flashcards

Flashcard

Work, W

Energy transferred by a force acting through a displacement

Needs both a force and motion along it.

Test your understanding

Question 1 of 5

A 60.0 N force directed 25.0° above the horizontal pulls a sled 15.0 m across level snow. How much work does the force do?

Question 2 of 5

A box slides along a level floor. Which force does zero work on the box?

Question 3 of 5

Kinetic friction of 40.0 N acts on a box as it slides 3.00 m. How much work does friction do on the box?

Question 4 of 5

A horizontal rope pulls a crate 4.00 m across a level floor with 50.0 N while kinetic friction is 35.0 N. What is the net work on the crate?

Question 5 of 5

How much work is needed to stretch an ideal spring with k = 400 N/m by 0.050 m from its relaxed length?

← Previous topicNext topic →