← Back to Physics

Potential energy and voltage

Electric potential, or voltage, measures energy per unit charge. It is the quantity batteries supply, outlets deliver, and circuits divide up.

Electric potential energy

Two point charges have potential energy \(U = kq_1q_2/r\). Like charges have positive potential energy, released as they fly apart; opposite charges have negative potential energy, so work must be done to separate them. As with gravity, the electric force is conservative, so potential energy depends only on position.

Electric potential

Electric potential is potential energy per unit charge, \(V = U/q\), measured in volts, where 1 V = 1 J/C. A point charge produces a potential \(V = kq/r\). Unlike the field, potential is a scalar, so potentials from several charges simply add as numbers.

Potential difference

What matters physically is the potential difference between two points, \(\Delta V\), often just called voltage. Moving a charge q through a potential difference changes its potential energy by \(\Delta U = q\Delta V\). A 12 V car battery gives each coulomb of charge 12 J of energy as it passes through.

The electron volt

In atomic and particle physics, energies are often given in electron volts: 1 eV is the energy an electron gains moving through 1 V, about \(1.60 \times 10^{-19}\) J. Visible light photons carry about 2 to 3 eV, chemical bonds a few eV, and protons in the Large Hadron Collider several trillion eV.

Uniform fields

Between parallel plates, the field is uniform and related to the potential difference by \(E = \Delta V / d\). Plates 2.0 mm apart connected to a 12 V battery have a field of 12 / 0.0020 = 6000 V/m, which is the same as 6000 N/C. Dry air breaks down and sparks when the field reaches roughly 3 million volts per metre.

Equipotentials

Equipotential surfaces connect points at the same potential. They are always perpendicular to field lines, and no work is needed to move a charge along one. Around a point charge, equipotentials are spheres; between parallel plates, they are flat planes parallel to the plates. A conductor in equilibrium is itself an equipotential.

Field from potential

The electric field points in the direction in which the potential decreases fastest, like water flowing downhill. Positive charges accelerate from high to low potential; electrons accelerate from low to high potential. Old television tubes and electron microscopes use this to accelerate electrons through thousands of volts.

Worked example

An electron starts from rest and accelerates through 100 V. It gains 100 eV, or 1.6 x 10^-17 J, of kinetic energy. Setting half m v squared equal to this, with the electron's mass 9.11 x 10^-31 kg, gives v squared of about 3.5 x 10^13, so v is about 5.9 x 10^6 m/s, roughly 2% of the speed of light, after crossing just 100 V.

Key takeaways

Point charges have potential energy k q1 q2 over r. Electric potential is energy per charge, measured in volts (joules per coulomb); for a point charge it is kq over r, and potentials add as scalars. A charge moving through a potential difference changes its energy by q times delta V. One electron volt is about 1.60 x 10^-19 J. In a uniform field, E equals delta V over d. Equipotentials are perpendicular to field lines. Positive charges move towards lower potential, electrons towards higher.

Flashcard

Electric PE

U = k q1 q2 / r

Point charges.

Check your understanding

How much energy does a 12 V battery give to each coulomb of charge passing through it?

Take the unit quiz

← Previous lesson Next lesson →