Free-body diagrams
A free-body diagram isolates one object and shows every force acting on it. It is the single most useful tool for solving force problems.
Drawing the diagram
To draw a free-body diagram, isolate the object, represent it as a dot or box, and draw an arrow for each force acting on it, starting at the object and pointing in the force's direction. Include only forces on the object, not forces it exerts on others. Then choose axes, often along and perpendicular to the motion.
Common forces
Weight, \(mg\), always points straight down. The normal force is the push of a surface, perpendicular to it. Tension is the pull of a rope or cable along its length. Friction acts along a surface, opposing sliding or attempted sliding. Applied forces are pushes or pulls by people or machines.
Newton's third law
Newton's third law states that when object A exerts a force on object B, B exerts an equal and opposite force on A. These action-reaction pairs act on different objects, so they never cancel each other in a single free-body diagram. When you push on a wall, the wall pushes back on you; when a rocket pushes exhaust gas backwards, the gas pushes the rocket forward.
The normal force is not always mg
On a level floor with no other vertical forces, the normal force equals mg. But in a lift accelerating upward at a, the floor must push harder: \(N = m(g + a)\). A 60 kg person in a lift accelerating upward at 2.0 m/s² feels a normal force of 60 x 11.8 = 708 N, so a scale reads more than their weight.
Inclines
On a slope at angle \(\theta\), resolve weight into a component \(mg\sin\theta\) down the slope and \(mg\cos\theta\) into the surface. The normal force balances the second, \(N = mg\cos\theta\). On a frictionless 30° incline, the acceleration down the slope is \(g\sin 30° = 4.9\) m/s², regardless of mass.
Connected objects
For objects joined by a light rope, the rope's tension is the same throughout, and the objects share one acceleration. Draw a diagram for each object, apply Newton's second law to each, and solve the equations together, or treat the whole system as one object to find the acceleration first.
Two-block example
A 2.0 kg block on a frictionless table is pulled by a string over a pulley attached to a hanging 1.0 kg block. The system's net force is the hanging block's weight, 1.0 x 9.8 = 9.8 N, acting on 3.0 kg, so a = 9.8/3.0, about 3.3 m/s². The tension that accelerates the table block is 2.0 x 3.27, about 6.5 N, less than the hanging weight.
Worked example
A 10 kg crate hangs from two ropes, each at 30 degrees above the horizontal. By symmetry, each rope has tension T, and their vertical components must support the weight: 2T sin 30 = 98 N, so T = 98 N. Each rope pulls with a force equal to the crate's full weight, because shallow angles demand large tensions; a nearly horizontal rope would need enormous tension.
Key takeaways
A free-body diagram shows every force on one object: weight downward, normal force perpendicular to a surface, tension along ropes, friction along surfaces, and applied forces. Newton's third law pairs act on different objects and never cancel on one diagram. The normal force equals mg only in simple cases; in an upward-accelerating lift it is m(g + a). On an incline, weight splits into mg sin theta along and mg cos theta into the surface. Connected objects share acceleration and tension; shallow rope angles require large tensions.
Flashcard
Sketch of all forces on one object
Check your understanding
When you push on a wall with 50 N, what does Newton's third law say?
