Static and kinetic friction
Friction resists sliding between surfaces. It can hold objects still, slow moving ones, and is essential for walking, driving, and braking.
Origins of friction
Friction arises from interactions between surfaces at microscopic contact points, where tiny bumps catch and molecules attract. Even polished surfaces are rough at small scales. Friction depends mainly on the types of surfaces and how hard they are pressed together, measured by the normal force, and is largely independent of the contact area.
Static friction
Static friction acts when surfaces are not sliding relative to each other. It adjusts to match the applied force, up to a maximum: \(f_s \le \mu_s N\), where \(\mu_s\) is the coefficient of static friction. Push gently on a heavy sofa and it does not move, because static friction exactly balances your push.
Kinetic friction
Kinetic friction acts once surfaces slide. It is roughly constant: \(f_k = \mu_k N\). For most surface pairs, \(\mu_k < \mu_s\), which is why it takes more force to start a heavy box moving than to keep it moving. Typical values are about 0.04 for steel on ice and roughly 0.7 to 1.0 for tyres on dry asphalt.
Starting and sliding
A 10 kg box rests on a floor with a static coefficient of 0.40 and a kinetic coefficient of 0.30. The normal force is 98 N, so a push must exceed 0.40 x 98, about 39 N, to start it moving. Once sliding, kinetic friction is 0.30 x 98, about 29 N. A steady 50 N push then gives a net force of about 21 N and an acceleration of about 2.1 m/s².
Friction on an incline
A block on a slope stays still while static friction can balance \(mg\sin\theta\). It begins to slip when \(\tan\theta\) exceeds \(\mu_s\), giving a simple way to measure the coefficient: tilt the board until the block just begins to slide and take the tangent of that angle.
Drag and terminal velocity
Air resistance, or drag, grows with speed. A falling skydiver accelerates until drag equals weight, then falls at a constant terminal velocity, roughly 55 m/s, about 200 km/h, in a belly-down position. Opening a parachute greatly increases drag, reducing terminal velocity to around 5 m/s for a safe landing.
Friction is useful
Without friction we could not walk, drive, or hold objects. Car tyres grip the road through static friction, since the contact patch is momentarily at rest relative to the road. Anti-lock braking systems prevent wheels from locking and skidding, keeping friction static, which is usually stronger than kinetic friction and preserves steering.
Worked example
A car moving at 20 m/s brakes hard on dry road with an effective coefficient of 0.70. The maximum friction is 0.70mg, so the deceleration is 0.70 x 9.8, about 6.9 m/s², whatever the car's mass. The braking distance is 20 squared divided by (2 x 6.9), about 29 m. On ice with a coefficient of 0.10, it would be about 200 m.
Key takeaways
Friction arises from microscopic contact and depends on surface types and the normal force, not mainly on area. Static friction matches applied force up to mu_s times N; kinetic friction is about mu_k times N, and mu_k is usually smaller. Starting an object takes more force than keeping it moving. On an incline, slipping begins when tan theta exceeds mu_s. Drag grows with speed until it balances weight at terminal velocity. Friction makes walking and driving possible; anti-lock brakes keep tyres in static contact. Braking deceleration on a level road is about mu times g.
Flashcard
Force resisting sliding between surfaces
Check your understanding
Why does it usually take more force to start a heavy box sliding than to keep it sliding?
