Torque drives rotation
A force makes an object turn only if it acts at a distance from the axis. Torque measures this turning effect and governs both rotation and balance.
Defining torque
Torque is the turning effect of a force: \(\tau = rF\sin\theta\), where r is the distance from the axis to where the force acts and \(\theta\) is the angle between r and F. Torque is measured in N·m. A force pointing straight through the axis produces no torque, however large.
Lever arm
The lever arm is the perpendicular distance from the axis to the line of the force, \(r\sin\theta\). Door handles are placed far from the hinges to maximise the lever arm, and a longer wrench loosens a stuck bolt more easily. A 40 N push at right angles, 0.25 m from a bolt, gives 10 N·m; at 30° to the wrench, only 5.0 N·m.
Direction of torque
Torques are counted as positive or negative depending on whether they tend to turn an object anticlockwise or clockwise. In three dimensions, torque is a vector along the axis, found with the right-hand rule: curl the fingers of your right hand in the direction of rotation, and your thumb points along the torque.
Newton's second law for rotation
The net torque on an object equals its moment of inertia times its angular acceleration: \(\tau_{net} = I\alpha\). Just as mass resists linear acceleration, moment of inertia resists angular acceleration. A 10 N rope pull on the rim of a 0.20 m radius pulley with I = 0.040 kg·m² gives a torque of 2.0 N·m and an angular acceleration of 50 rad/s².
Static equilibrium
An object in static equilibrium, such as a bridge or a ladder, has zero net force and zero net torque about any axis. Engineers use these two conditions to find the forces in beams, cables, and supports. Choosing the axis at an unknown force eliminates it from the torque equation, simplifying the algebra.
Seesaws and balance
A 30 kg child sitting 2.0 m from a seesaw's pivot balances a 40 kg child sitting 1.5 m from it on the other side, because their torques are equal: 30 x 9.8 x 2.0 = 40 x 9.8 x 1.5 = 588 N·m. The heavier person must sit closer to the pivot.
Centre of gravity and stability
The centre of gravity is the point where an object's weight effectively acts. An object is stable while its centre of gravity lies above its base of support; if it tips past the edge, gravity's torque topples it. Racing cars are built low and wide, and people widen their stance on a moving bus, to keep the centre of gravity over the base.
Worked example
A uniform 4.0 m plank weighing 200 N rests on supports at each end, and a 600 N painter stands 1.0 m from the left end. Taking torques about the left support: the right support force R satisfies R x 4.0 = 600 x 1.0 + 200 x 2.0, so R = 250 N. The forces must also balance vertically, so the left support pushes 800 - 250 = 550 N.
Key takeaways
Torque, r F sin theta, measures a force's turning effect in N m; a force through the axis gives none. The lever arm is the perpendicular distance to the force's line, which is why long wrenches and far-off door handles help. Torque direction follows the right-hand rule. Net torque equals I times alpha, rotation's version of F = ma. Static equilibrium requires zero net force and zero net torque. Balanced seesaws have equal torques. Objects stay stable while their centre of gravity is over the base of support.
Flashcard
r F sin theta
Check your understanding
A 30 kg child sits 2.0 m from a seesaw's pivot. Where must a 40 kg child sit on the other side to balance?
