Algebra › Section F · Factoring › Topic F.4
A general factoring strategy
You know the tools - GCF, grouping, trinomial hunts, special patterns. The strategy is the routing table that sends any polynomial to the right one, in the right order, until nothing is left to factor.
The strategy in one breath
Factoring is no longer a bag of tricks - it is a checklist. Take out the greatest common factor. Count the remaining terms. Two terms: try the squares and cubes patterns. Three terms: try the trinomial techniques. Four terms: try grouping. Then re-examine every factor you produced, because factors of factors are the most commonly missed answers. Finally, verify by multiplying back. Run the checklist on any polynomial, however intimidating, and it dissolves step by step.
Step zero: the greatest common factor
Every factorisation begins with the GCF of all terms, before any pattern-hunting. \(6x^3 - 9x^2 + 12x = 3x(2x^2 - 3x + 4)\), and only then does the trinomial question arise (here it is prime). When the leading coefficient is negative, factoring out a negative GCF cleans up the signs: \(-2x^2 + 8x = -2x(x - 4)\). Skipping step zero makes later steps harder or impossible - a GCF left inside can hide a pattern or a common binomial entirely.
The routing question: how many terms?
After the GCF, term count routes the problem. Two terms left: the polynomial is either a difference of squares, a difference of cubes, a sum of cubes, or prime - only these patterns apply to binomials. Three terms: try perfect-square recognition first, then the number hunt for leading coefficient 1, or the AC method otherwise. Four terms: grouping is the technique - pairs sharing a common binomial. Term count never lies, and it narrows the search before any computation begins.
Two-term routing in detail
For a binomial, ask three questions in order. Are both terms squares with a minus between them? Difference of squares. Are both terms cubes? Then the sum or difference of cubes pattern applies - both directions factor. Are both terms squares with a plus between them? Prime over the reals; write it down and stop. Examples: \(16x^2 - 81\) factors (squares, minus), \(27x^3 + 8\) factors (cubes, plus), \(16x^2 + 81\) is prime (squares, plus). The three answers cover every binomial that can appear after a GCF.
Three-term routing in detail
For a trinomial, first check the perfect-square pattern - square ends and a middle of exactly \(2ab\) - since recognition beats a hunt. Otherwise, leading coefficient 1 means the number hunt: two numbers multiplying to the constant and adding to the middle coefficient. Any other leading coefficient means the AC method: product \(ac\), sum \(b\), split, group. If every candidate pair fails, the trinomial is prime - but only after the full list of pairs has been tried with every legal sign arrangement.
Four-term routing: grouping
Four terms point at grouping: split into two pairs, factor each pair, and hope for a shared binomial. \(x^3 + 5x^2 + 4x + 20 = x^2(x + 5) + 4(x + 5) = (x + 5)(x^2 + 4)\). When the first pairing shares nothing, rearrange before giving up - \(x^3 + 4x + 5x^2 + 20\) groups badly as presented but rearranges into the same solution. Grouping also powers the AC method's final step, so this one technique serves two stations in the routing table.
Factoring completely: the second pass
A factorisation is complete only when every factor is itself unfactorable. After any success, look at each factor again: \(12x^3 - 75x = 3x(4x^2 - 25)\) looks done but is not - \(4x^2 - 25\) is another difference of squares, giving \(3x(2x - 5)(2x + 5)\). Binomial factors deserve special suspicion, since differences of squares hide inside them. The habit to build: after every factor, ask "can this one go another round?" until the answer is no for all of them.
Worked example: the full checklist
Factor \(x^3 + 5x^2 + 4x + 20\) completely. GCF: none shared by all four terms. Term count: four, so group: \(x^2(x + 5) + 4(x + 5) = (x + 5)(x^2 + 4)\). Second pass: \(x + 5\) is linear and done; \(x^2 + 4\) is a sum of squares - prime over the reals. So the complete factorisation is \((x + 5)(x^2 + 4)\). Checking by distributing: \(x^3 + 4x + 5x^2 + 20\), which reorders to the original - the factorisation is certified.
Worked example: GCF hiding a cube
Factor \(2x^3 + 16\) completely. Step zero first: the GCF is 2, giving \(2(x^3 + 8)\) - and now the bracket is a sum of cubes, invisible until the GCF came out. Pattern: \(x^3 + 8 = (x + 2)(x^2 - 2x + 4)\). Second pass: the trinomial factor is prime - no integer pair multiplies to 4 and adds to -2, and the cube pattern guarantees this anyway. Complete answer: \(2(x + 2)(x^2 - 2x + 4)\). Checking at \(x = 1\): \(2 + 16 = 18\) and \(2(3)(3) = 18\).
Common mistakes to avoid
First, hunting patterns before extracting the GCF - the strategy's step zero exists because patterns hide behind common factors. Second, stopping at the first success: every factor needs the second pass. Third, forcing grouping on pairs that share nothing - rearrange the four terms or reconsider the route. Fourth, re-hunting a cube-pattern trinomial: \(x^2 - 2x + 4\) style factors are already prime. Fifth, skipping the final multiplication check that would catch a dropped GCF or a sign slip.
Key takeaways
Factor with a checklist, not inspiration: GCF first, always, including a negative GCF when the leading coefficient is negative. Then count terms - two terms route to the squares-and-cubes patterns, three terms to perfect-square recognition then the number hunt or AC method, four terms to grouping. Finish with the second pass, asking of every factor whether it can go another round, and stop only when all are prime over the integers. Verify by multiplying back. The checklist converts any polynomial, however large, into a sequence of small decisions.
Flashcards
Flashcard
Extract the GCF
Test your understanding
Question 1 of 5
What is the FIRST step in factoring 6x^3 - 9x^2 + 12x?
Question 2 of 5
Factor 12x^3 - 75x completely.
Question 3 of 5
Factor x^3 + 5x^2 + 4x + 20 completely.
Question 4 of 5
A polynomial has four terms after removing the GCF. Which technique does the strategy try?
Question 5 of 5
Factor 2x^3 + 16 completely.
